• Product Categories
  • 7" Hook Discs, No Dust Hole
  • 12-1/2" Bulk Adh Transfer Tape
  • 5" Hook Multi-hole/Mesh Discs
  • 1/4" sh Cotton Fiber Mtd Point
  • 12" Stringer Bead Knot Wheels
  • 12" A/O Bench Grinding Wheels
  • 6" Hook Discs, 7 dust holes
  • 1-1/2" Overlap Slotted Discs
  • 3/4" Double-Coated Paper Tape
  • 4-1/2"x7/8" T-29 Grind Wheels
  • Walter Linear Finishing
  • 5-1/4" Metal Foil Tapes
  • 5" Hook Discs (no holes)
  • 8" Discs, PSA, no dust holes
  • Sanding Star/Fladder Disc
  • 2" Type-M Quick-Chg Discs
  • Backup Pad, 4x5/8-11 Med Hook
  • Hand Brush
  • 4" T-29 Flap Discs
  • 5" x 5/8-11 T-1 Cut-off Wheels
  • Bandages
  • 4-1/2" T-29 Flap Discs
  • 3-1/2" Hook Disc Backup Pads
  • 1/2"" x 6"" Plain-Back Sheets
  • Sweep Strip Brushes
  • #427 Aluminum Foil Tape
  • 1/4" Nylon Abr Tube Brushes
  • 2-3/4" x 17-1/2" Hook Sheets
  • 1350-**-0103 Components
  • 3" Flap Brushes
  • 7"x7/8" T-27 Cut-off Wheels
  • Cartridge Roll Mandrels
  • 1-1/4" Rectangular Tube Brush
  • 3" Hook Coated Abr Discs
  • 4-" Diamond Wheels
  • Strap Polishing Belts
  • 5" x 5/8-11 Fiber Discs
  • 1/2 x 18 Coated Belts
  • 3/16" Crimped Wire Wheels
  • 3/4" Spiral Bands
  • 2 x 34 Coated Belts
  • 7" T-27 Flap Discs
  • Walter E-WELD
  • 2" Tube Center Wire Wheels
  • Foam-Back Abrasive Discs
  • 2-1/2" Tube Center Wire Wheels
  • 3" Hook Disc Backup Pads
  • 4" (96mm) Crepe Masking Tapes
  • Cotton Fiber, 1/4" shank
  • 3/4" Type-M Non-Woven QC Disc
  • 1-1/2" / 36mm Tapes
  • 3" Square Pads
  • Maintenance Brushes
  • Wide Non-Woven Belts
  • Sheets
  • 6" Hook Coated Abr Discs
  • Double-Coated Foam Tapes (by t
  • 2" NW Disc Holders
  • 3-11/16" Hook Triangle Sheets
  • 10" Sisal Fabric Wheels
  • 8" T-1 Cut-off Wheels
  • Buff & Polish Wheels
  • 6" Light Finishing Wheels
  • Discs, 7" Surface Conditioning
  • Minature Mounted End Brush
  • 14" Wheels
  • 3" Type-R Quick-Chg Discs
  • Type-R Non-Woven QC Discs
  • 12" Nylox Disc (Cup) Brush
  • 4-1/2" 36 grit Fiber Discs
  • 16" Buff & Polich Wheels
  • 7"x5/8-11 T-27 Cut-off Wheels
  • 12" Sanding Stars
  • 3/4 x 24 Coated Belts
  • 2" Rectangular Tube Brush
  • Driveway Coating Brushes
  • Non-Woven Abrasives, Norton
  • 4"x1/4 Fiber Discs
  • 13/16" dia Straight Cartridge
  • 14" Grinding/Bench Wheels
  • A24T Edge Grinding Wheels
  • 1-1/2" Spiral Bands
  • 1-1/2" Flap Wheels, 1/4 shank
  • Triangle & Teardrop Sheets
  • 3" Type-M Non-Woven QC Disc
  • Walter TWIST Quick Change Blen
  • 6" T-27 Grinding Wheels
  • 5" Flap Discs
  • 7" T-29 Angled Flap Discs
  • Low HP Chop Saw Wheels
  • Non-Woven Rolls, Misc Sizes
  • Detail/Watercolor Brushes
  • 6"x7/8" T-27 Grinding Wheels
  • 4" T-27 MTX Cotton Fiber Wheel
  • 2 x 30 Coated Belts
  • 3/8" Rectangular Tube Brush
  • 8" Non-Woven Rolls
  • 10" T-1 Stationary Wheels
  • 2" Mounted Flare Cup Brush
  • 9"x5/8-11 T-27 Grinding Wheels
  • Full-Taper Cartridge Rolls
  • Coolcut XX Sanding Discs
  • 3-1/2" Nylox Disc (Cup) Brush
  • 5" Hook Coated Abr Discs
  • 3" Interleaf Flap Discs
  • 4" Flap Wheels
  • 1-1/2" T-1 Cut-off Wheels
  • Non-Woven Abrasives, Standard
  • 5" PSA Coated Abr Discs
  • 8" Non-Woven Hook & Loop Disc
  • 5" Hook Disc Pad, Bolt-on
  • 2 x 60 Coated Belts
  • 6-1/2" Metal Foil Tapes
  • 6" CombiTwist Knot Cup Brush
  • 4" Combi-Twist Knot Cup Brush
  • 8" PSA Coated Abr Discs
  • Grinding Wheels, Weiler
  • 14" Nylox Disc (Cup) Brush
  • 3" Type-M Non-Woven QC Disc
  • Stationary Belts, Misc Sizes
  • 7" Non-Woven Rolls
  • 1" Flap Wheels, 1/4" shank
  • Vitrified Bond, 1/8" Shank
  • 5" Finishing Discs
  • 8" A/O Bench Grinding Wheels
  • 2 x 48 Coated Belts
  • Hand Pads, Non-Woven
  • 3/4" Nylon Abr Tube Brushes
  • 3 x 48 Coated Belts
  • 3/4" Type-S Quick-Chg Discs
  • Cross Pads
  • 5" 80 grit Fiber Discs
  • Steel Wool Pads
  • 7" Diamond Wheels
  • 2-1/2" Flap Wheel Cups
  • 3-1/2 x 15-1/2 Coated Belts
  • 1-3/4" .006 CS 1/4" Sh E3 Enca
  • 7" TN 5/8-11 Non-Woven
  • Discs, 4-1/2" Surface Conditio
  • Type "TN" 5/8-11 Non-Woven
  • Non-Woven Hand pads
  • 1-1/4" Hook Coated Abr Disc
  • 3 x 118 Non-Woven Belts
  • 2" Type-S Quick-Chg Discs
  • 18" Bulk Adh Transfer Tapes
  • 6"x7/8" T-1 Cut-off Wheels
  • VHB Foam Tape x Code
  • 2" Felt T-27 Mini Flap Disc
  • 9" x 11" Cloth Sheets
  • Coated Abrasives, Standard
  • 2 x 36 Coated Belts
  • 4" Sanding Stars
  • 6" Hook Multi-hole/Mesh Discs
  • Weiler 2-3/4" Knot Wire Cup B
  • 3" Mounted Flare Cup Brush
  • 5/16 Full-Taper Cartridge Roll
  • 81 mm x 133mm Hook Sheets
  • 10" General Purpose Wheels
  • #8981 Scotch Filament Tape
  • Wire Products, Weiler
  • Stationary Belts, Misc Sizes
  • 4-1/2" Cable Twist Knot Whls
  • 1/4 x 18 Coated Belts
  • 3" Crimped Wire Cup Brush
  • 3/8 x 13 Coated Belts
  • 4-1/2" Trim-Kut Discs
  • Weiler 5" Knot Wire Cup Brush
  • 1" 040 SiC - 120 1/4" Stem . M
  • Abrasive Rolls, Adhesive Back
  • 10 x 144 Coated Belts
  • 3" Nylox Disc (Cup) Brush
  • Pilot End Brushes
  • Sanding Discs, Plain-Backed
  • 1/2" PSA Coated Abr Discs
  • 4-1/2" T-28 Angled Grind Wheel
  • #427 Aluminum Foil Tape
  • 5" 100 grit Fiber Discs
  • 1 x 30 Coated Belts
  • 7/16" Power Tube Brushes
  • 1-1/2"d Flap Wheel Brush
  • Tapes
  • 4-1/2" Fiber Discs
  • 1-1/2" Bulk Adh Transfer Tapes
  • 1" Finishing Flap Wheels
  • Peening Equip & Supplies
  • 2" Non-Woven Hook & Loop Disc
  • 2-3/4" Stem Mount Nylox Cup Br
  • 4" MX & Metalworking Wheels
  • 4" Type-S Quick-Chg Discs
  • 5" 80 grit Fiber Discs
  • 1/2" Vinyl / Plastic Tapes
  • 3M 2 in Finesse-It Disc Rolls
  • 3" Plater's Wire Wheels
  • #4508 Vinyl Tapes
  • 3" Type-S Quick-Chg Discs
  • 1-1/2" Unitized Wheels
  • 3" Flap Brushes
  • 36 x 75 Coated Belts
  • 8" Flap Wheels
  • 8" Hard / Treated Cloth Wheel
  • 4-1/2" Finishing Discs
  • 3 x 7-1/4 & 7-3/8 Coated Belts
  • 3" Type-S Quick-Chg Discs
  • 3" Finishing Flap Wheels
  • 3" .040 SiC - 120 1/2-3/8 A.H.
  • 8" Hook Disc Pad, 16 dust hol
  • 4" Knot Wire Wheels
  • Weiler Vortec Pro Knot Wire Cu
  • 6" PSA Disc Backup Pads
  • 2" Spiral Bands
  • 25.4" Metal Foil Tapes
  • 1/2" Controlled Flare End Br
  • Paint Brushes & Accessories
  • 1/4 x 24 Coated Belts
  • 8" Hook Disc Backup Pads
  • 3" Type-R Quick Chg Disc Pads
  • 1/8" sh Resin Bond Mtd Points
  • Square Brushes
  • Dual-Lock Type 170
  • 6" Nylox Disc (Cup) Brush
  • 2 x 60 Coated Belts
  • 1/4 x 24 Non-Woven Belts
  • 5+" Metal Foil Tapes
  • 3/4" Taper
  • 9" x 11" Cloth Sheets
  • 4-1/2" x 5/8-11 Flap Discs
  • 2-1/2" Flap Wheels
  • 2" Minature Mounted End Br
  • Portable Non-Woven Belts
  • 7" NW Disc Holders
  • 3/4" dia Straight Cart. Rolls
  • #616 Red Lithographer's Tape
  • 6" Soft/Untreated Cloth Wheel
  • 4" Flaring Cup Wheels
  • 6" T-27 Flap Discs
  • 3" Standard Twist Knot Wheels
  • 1/2" HD Crown Composite Staples
  • 7" Non-Woven Flap Discs
  • 1" & Smaller Unitized Wheels
  • 3 x 24 Coated Belts
  • Rolls, Coated Abrasive
  • 1/2" Crimped Wire End Brush
  • 3M Finesse-It Buff & Polish Di
  • 4-1/2" Felt Polishing Discs
  • 4" Type-R Quick-Chg Discs
  • 9" Hook Discs, 9 dust holes
  • Hook Non-Woven Discs
  • Type-S Quick Change Discs
  • 7" x 7/8 Flap Discs
  • 8" Hook Discs, 16 dust holes
  • 21" Metal Foil Tapes
  • Air Force Refillable Sprayer S
  • 6" Discs, PSA, 8 dust holes
  • 12" Bench Mount Grinding Whee
  • 1-1/2" Type-S Quick-Chg Discs
  • 1-1/4" Power Tube Brushes
  • 1 x 21 Coated Belts
  • 1" Type-R Quick-Chg Discs
  • Vehicle Wash Brushes
  • 1" Type-R Quick-Chg Discs
  • 9 x 48 Coated Belts
  • 6" Cloth-Back PSA Discs
  • 6" Clean & Strip Wheels
  • 2" Type-M Non-Woven QC Disc
  • 3" Unitized Wheels
  • 1-1/4" Foil Tapes
  • 1-1/2" Rectangular Tube Brush
  • 8" Hook Disc Pad, 6 dust holes
  • Back-up Pads, Fiber Discs
  • #353 Packaging Tapes
  • Hook Triangle Sheets
  • 3 x 21 Coated Belts
  • Cleaning Pads
  • 10" Double Row Knot Brush
  • 4" T-1 Grinding Wheels
  • 4" Cut & Polish Wheels
  • 6" PSA Coated Abr Discs
  • 1" Type-M Quick-Chg Discs
  • 3" Felt Wheels
  • 2-3/4" Power Tube Brushes
  • Buff & Polish Compounds/Wheels
  • 4-1/2" NW Disc Holders
  • Carbon Steel Mig Wire
  • Small Belts, Carborundum
  • Type-R Non-Woven QC Discs
  • Nylox Abrasive Products
  • 2 x 17-3/4 Non-Woven Belts
  • 9" T-27 Cotton Fiber Wheels
  • 3/4" Flap Wheels, 1/4" Shank
  • 1-1/8 x 21 Non-Woven Belts
  • 6" Flap Wheels
  • 4" Type-R Non-Woven QC Disc
  • 1-1/2" Spiral Bands
  • 2-3/8" Flap Wheels
  • Encore Flap Discs
  • Industrial Corrosion Protectio
  • 1-1/16" Rectangular Tube Brush
  • 3-1/2 x 15-1/2 Coated Belts
  • 3" Foam-Back Discs
  • 2-3/4" x 17-1/2" PSA Sheets
  • /1/2" Full Taper
  • 8" Unitized Wheels
  • 2 x 36 Non-Woven Belts
  • 8" Non-Woven Rolls
  • 7" 120 grit Fiber Discs
  • Sheets, Coated Abrasive
  • 2" Interleaf Flap Wheel
  • 4" Standard Twist Knot Wheels
  • 9/16 x 25-9/16 Non-Woven Belts
  • 5/16" dia Cartridge Rolls
  • #3338 Aluminum Foil Tape
  • Mounted Points, Cotton Fiber
  • 1-1/2 x 60 Coated Belts
  • 1-1/4" Encapsulated Crimped
  • 1/4 x 24 Coated Belts
  • 7" Hook Coated Abr Discs
  • 4" Double-Row Knot Cup Brush
  • Small Non-Woven Belts, Standar
  • 6-1/2" Flap Discs
  • 1-1/8 x 21 Coated Belts
  • 3" Flap Wheels
  • 2 x 32 Non-Woven Belts
  • Type-M Non-Woven QC Discs
  • Adaptor, 1/4-20 x 1/4 shk 8-in
  • Mandrel, 3/32 in x 3/4 in x 1/
  • 5" x 7/8 T-27 Grinding Wheels
  • 1-1/2 x 144 Coated Belts
  • 8" Nylox Wheels
  • Shape "A", 1/4" Shank Burs
  • Weiler Wire Cup Brushes
  • 9/16" 320 .022 SiC - M-Brad Po
  • 8" Non-Woven Hook & Loop Disc
  • 1/4 x 20-1/2 Coated Belts
  • 2" Type-R Quick-Chg Discs
  • 6" Clean & Finish Wheels
  • Vitrified Bond, 1/4" shank
  • 3" Non-Woven Hook & Loop Disc
  • Backup Pad, 4-1/2x5/8-11 Med H
  • 9" Hook Coated Abr Discs
  • 1/2" Crimped Mtd Wheels
  • 8 x 107 Coated Belts
  • Small Scratch Brushes, SS
  • 1150-**-0103 Components
  • 3/4" Flap Wheels, 1/4-20 Shank
  • 6-3/8 x 63 Coated Belts
  • 6" x 1-1/2" Flap Wheels
  • 3"x1-3/4"x1/4 Flap Brush
  • 7/16" Rectangular Tube Brush
  • 1/2 x 24 Coated Belts
  • 2-3/4" Encapsulated End Brushe
  • 5" Hook Discs, 9 dust holes
  • 6" Hook Discs, 6 dust holes
  • 3" Type-M Quick Chg Disc Pads
  • Black VHB Foam Tapes
  • Small Scratch Brushes
  • 5" T-28 Angled Grind Wheels
  • 5" Hook Discs, 8 dust holes
  • 305 mm Metal Foil Tapes
  • 3/4" Encap Crimped End Brush
  • 5/8" dia Straight Cart. Rolls
  • 1/4" Rectangular Tube Brush
  • Backup Pads, Hook & Loop
  • 2" Felt Polishing Flap Disc
  • Walter Finishing
  • Walter 1/4" ALLSTEEL Grinding
  • Stationary Belts - Diamond
  • 1-1/2" dia Straight Cartridge
  • 9" x 11" Screen Sanding Sheets
  • 6" Finishing Discs
  • General Purpose Wheels
  • 3/8 x 18 Coated Belts
  • 300 mm Metal Foil Tapes
  • 3" Clean & Strip Wheels
  • 3" x 4-1/4" Hook Sheets
  • Flap Discs, Norton
  • Discs, 4" Surface Conditioning
  • 2x1x1/4 shk Soft D3/H25 Felt P
  • Flex Tools
  • Diamond & Super Abrasives
  • Pink (Tough Steels)
  • 7/8" Rectangular Tube Brush
  • 4-1/2"x7/8 Fiber Discs
  • 1-1/2 x 32 Coated Belts
  • Flap Wheels
  • Flat Handle Marking Brushes
  • 8" Metal/Mult Finishing Wheels
  • W Shape Mounted Points
  • 3 x 21 Coated Belts
  • 3" Flap Wheels
  • Unitized Kit Refills
  • 4" x 2" Flap Wheels
  • Sheets, PSA (Adhesive) Backed
  • 3"d Flap Wheel Brush
  • 15" Hook Coated Abr Discs
  • Specialty / Misc Items
  • 3/4" Type-S Quick-Chg Discs
  • 7"x7/8" T-1 Cut-off Wheels
  • #433L High Temp Alu Foil Tape
  • 1-1/4" Minature Mounted End Br
  • 12" Non-Woven Rolls
  • Cross Pads
  • 1" Non-Woven Flap Brushes
  • 62 x 103 Coated Belts
  • 3/4" Vinyl / Plastic Tapes
  • 12 x 144 Coated Belts
  • 49-1/4" Metal Foil Tapes
  • 9" x 11" Paper Sheets
  • 1" Nylon Abr Tube Brushes
  • Knot Wire Cup Brush
  • 5" 60 grit Fiber Discs
  • 1000-**-0103 Components
  • Brush/Sweep Accessories
  • PSA Backed Sanding Discs
  • 2" Type-S Non-Woven QC Discs
  • Type 18 Plugs
  • 4-1/2" Non-Woven Flap Discs
  • Accessories
  • 75 mm x 110 mm PSA Sheets
  • Type-M Non-Woven QC Discs
  • Dynamit Abrasive Glove
  • 47" Metal Foil Tapes
  • Non-Woven Flap Brushes
  • 9" & larger Fiber Discs
  • 1/2" dia Cartridge Rolls
  • 4-1/2" T-29 Flap Discs
  • Non-Woven Abrasives, Sait
  • 6" Hook Discs, 8 dust holes
  • 4-1/2" T-27 Flap Discs
  • 8" x 3/4" AH Non-Woven Discs
  • 4 x 24 Coated Belts
  • 6" Hook Discs, 8 dust holes
  • 1" Flap Wheels, 1/4" shank
  • 11" Hook, Multi-hole / Mesh
  • 6" SiC Green Bench Wheels
  • 9-21/25" Metal Foil Tapes
  • Plater's Wire Wheels
  • 1/4 x 18 Coated Belts
  • 8-1/2" x 11" Hook Paper
  • 4-1/2" Quick-Change Discs
  • 1 x 30 Coated Belts
  • 4-1/2" Fiber Discs
  • 2-3/4 x 15-1/2 Coated Belts
  • Double-Row Knot Wheels
  • 2-3/4" x 5" Hook Sheets
  • Discs, Coated Abrasive
  • 5/8" Rectangular Tube Brush
  • 3/8 x 24 Coated Belts
  • 11" Hook Discs (no holes)
  • Coated Abrasive Rolls
  • Standard Sponges
  • Other Misc Sizes
  • 4" Stem Mounted Wire Wheels
  • Fiber Discs, Sia
  • 3" Nylon Wheels
  • 6 x 48 Coated Belts
  • 6" Flap Discs
  • 3" Flap Wheels, 1/4-20 QC
  • 8 x 61 Coated Belts
  • 9"x7/8" T-27 Cut-off Wheels
  • Wire Cup Brushes
  • 11" PSA Disc Backup Pads
  • 5" T-1 Cotton Fiber Wheel
  • 12" T-1 Stationary Wheels
  • 4" Type-R Quick-Chg Discs
  • 7" Non-Woven Flap Discs
  • 4-1/2" Fiber Discs
  • File Belts, Misc Sizes
  • 4" Flap Wheels
  • Masking Tapes (by Code/Type)
  • 10" T-1 Stationary Wheels
  • 5" T-27 Flap Discs
  • Sheets, Plain-Backed
  • 4-1/2" T-29 Grinding Wheels
  • 4" x 5/8" AH Flap Discs
  • 3 x 36 Coated Belts
  • 7"x7/8 Fiber Discs
  • 1/2 x 24 Coated Belts
  • Flaring Cup Wheels
  • 1-1/4" dia. Flap Bands
  • #2552 Vib Dampening Tape
  • 14" Nylox Wheels
  • 7/8" Spiral Bands
  • 1-1/4" Spiral Bands
  • 6" x 2" Flap Wheels
  • 4 x 64 Coated Belts
  • 8" SiC Green Bench Wheels
  • 1-1/2 x 60 Non-Woven Belts
  • Weiler 3" Crimped Wire Cup Br
  • 6" Flap Wheels
  • Hand Blocks / Sheet Holders
  • 6" Diamond Wheels
  • 1" Safety Walk Traction Tape
  • Hook/Loop Back Abr Rolls
  • 2 x 72 Coated Belts
  • Repair Parts
  • Bio-Circle Mini Accessories
  • 5" x 7/8 T-27 Cut-off Wheels
  • 2" Spiral Bands
  • 44 x 85 Coated Belts
  • 1-5/8" Flap Wheels
  • 4-1/2" x 5/8-11 Flap Discs
  • Flap Wheels
  • 2-1/2" / 60 mm Masking
  • 6" Discs, PSA, 8 dust holes
  • 1-1/2" Mounted Flare Cup Brush
  • Paper Back Sheets
  • Small Type-R Quick Chg Pads
  • Maintenance Brushes
  • 1" Power Tube Brushes
  • 14" Low HP Chop Saw Wheels
  • 3/4" Type-S Non-Woven QC Discs
  • Chopsaw Wheels
  • 2" Double-Coated Paper Tape
  • 2-1/2" Mounted Flare Cup Brush
  • 2 x 36 Non-Woven Belts
  • 7" T-27 Cut-off Wheels
  • 2 x 17-3/4 Coated Belts
  • 8 x 60 Coated Belts
  • 3/4 x 18 Coated Belts
  • 6" Flaring Cup Wheels
  • Abrasive Rolls, Misc Sizes
  • 3" Flap Wheel Cup, 1/4" s
  • 8" Crimped Wire Wheels
  • Backup Pads, Type-R (screw)
  • 9"x5/8-11 T-27 Grinding Wheels
  • Spiral Band Mandrels
  • 6" & widee Single Coated Foam
  • 2" Type-S Quick-Chg Discs
  • 1-1/8" Power Tube Brushes
  • Plain-Back Sheets, Misc Size
  • 4" Flap Wheels
  • 2" ATG Adh Transfer Tapes
  • 1 x 42 Coated Belts
  • Aluminum Mig Wire
  • 2" Flap Wheel, 1/4" shank
  • 3/16" dia Straight Cart. Rolls
  • 1 x 30 Coated Belts
  • 6" Sisal Fabric Wheels
  • 3/4" Nylox End Brush
  • 6" Bridled Cup Brush
  • 1" Flap Wheel, 1/4-20 shank
  • 11" Hook Multi-hole/Mesh Discs
  • 25 x 54 Coated Belts
  • 3" 1/4"ch T-1 Cut-off Wheels
  • 7"x5/8-11 T-27 Cut-off Wheels
  • Type-M Quick-Change Discs
  • Dust Pans
  • .24" Bulk Adh Transfer Tapes
  • 1-3/4" Spiral Bands
  • Double-Sided Tapes x CODE
  • 1/4" sh Mounted Points
  • Trial Kits
  • 3" Spiral Bands
  • 2-3/4" .040 SiC - 120 1/4" Ste
  • 8" Nylon Wheels
  • 1-1/4" Spiral Bands
  • 1/2" Tube Brushes
  • Burr-RX Disc Brushes
  • 1" PSA Discs (and smaller)
  • 50 x 103 Coated Belts
  • Interleaf Flap Discs
  • Air Force Refillable Sprayer S
  • 6" x 1/4" AH Non-Woven Discs
  • 3/4 x 20-1/2 Non-Woven Belts
  • Specialty Abrasives
  • 4-1/2" 36 grit Fiber Discs
  • 1-1/2" Felt Flap Wheels
  • 8 x 107 Coated Belts
  • Blocks (Floor Rubs & Wedges)
  • 5" x 7/8 T-1 Cut-off Wheels
  • #3363 Aluminum Foil Tape
  • 12" PSA Coated Abr Discs
  • 4" Knot Wire Wheels
  • Accessories
  • 3 x 48 Coated Belts
  • Festool 3" Granat H&L Discs
  • 5" PSA Coated Abr Discs
  • 3" 3/8"ch T-27 Cut-off Wheels
  • Non-Woven Blocks
  • 4-1/2" T-27 MTX Cotton Wheels
  • VHB Foam Tapes (by type/code)
  • 7/16" Rectangular Tube Brush
  • Clean & Strip Wheels
  • Stationary Belts, VSM
  • Crimped Wire End Brushes
  • 1" wide Foam Tapes
  • Walter 1/4" T-28 HP Spin-On Gr
  • Discs, Non-Woven Finishing
  • Walter ZIP+ Cut-Off Wheels
  • Crimped Wire Wheels
  • 1 x 132 Non-Woven Belts
  • 5" Diamond Wheels
  • 3M 3-3/4 in Finesse-It Buff &
  • Knot Wire End Brushes
  • 1" Type-M Non-Woven QC Disc
  • Fladder Wheels/Discs
  • 6" Metal Foil Tapes
  • Hook Non-Woven Discs
  • 1/2" Rectangular Tube Brush
  • 4" T-1 Cut-off Wheels
  • Type 17 Cones
  • 14" PSA Coated Abr Discs
  • 2 x 36 Coated Belts
  • 5" TN 5/8-11 Non-Woven
  • 12" Coated Abrasive Rolls
  • Bulk First Aid components
  • 4" Knot Wire Wheels
  • 3" x 1 Grinding Wheels
  • 2 x 60 Coated Belts
  • 4-1/2" Hook Discs, 9 dust hole
  • 4" Flap Discs
  • Blue Packaging Tapes
  • Cup Flap Wheels
  • 5" Discs, PSA, 5 dust holes
  • 4 x 168 Coated Belts
  • 5" Quick-Change Fiber Discs
  • 7" T-27 Flap Discs
  • 4 x 24 Coated Belts
  • 7972 EVA Foam-Back Discs
  • Foam-Back Abrasive Discs
  • 1-3/8" Tube Center Wire Wheels
  • 4" Interleaf Flap Wheel
  • 3 x 21 Coated Belts
  • 5" T-27 MTX Cotton Wheels
  • 2-1/2" Flap Wheel Cup 1/4"s
  • 2-3/4" .010 CS 1/4" Sh E3 Enca
  • 3-1/2" Spiral Bands
  • 1-1/16" Power Tube Brushes
  • 2-3/4" x 8" Hook Sheets
  • 14" T-1 Cut-off Wheels
  • 4-1/2" x 5-1/2" Plain Sheets
  • 6" x 1/4" ch Finishing Discs
  • 3/16" dia. Power Tube Brush
  • 2" Interleaf Flap Discs
  • 4" Sisal Fabric Wheels
  • 1 x 132 Non-Woven Belts
  • 6 x 103 Coated Belts
  • 1/4 x 72 Coated Belts
  • Discs, Micro-mesh
  • Minature Mounted End Brush
  • Bullets, Rubber
  • 5" Non-Woven Hook & Loop Disc
  • 13" Bulk Adh Transfer Tapes
  • 37 x 60 Non-Woven Belts
  • 4-1/2" T-1 GFX Cotton Wheels
  • 1/4" Shank Burs
  • 1-1/2" Flap Wheels
  • 4" Unitized Wheels
  • 3 x 10-11/16 Coated Belts
  • 2-1/2+" Foil Tapes
  • Street Brooms
  • 8" Discs, PSA, 8 dust holes
  • 6" Hook Coated Abr Discs
  • 5" Felt Wheels
  • Belts, Non-Woven
  • 3" Flap Brushes/Mounted Wheel
  • 1/2" ATG Adh Transfer Tapes
  • Cartridge Rolls
  • 4 x 132 Coated Belts
  • Shape "B", 1/4" Shank Burs
  • Street Brooms
  • 10" Deburring Wheels
  • 1" T-1 Grinding Wheels
  • 10" Concrete Cut-off Wheels
  • 3" T-27 Cut-off Wheels
  • 2-1/2" Flap Wheels, 1/4-20 QC
  • 2" Type-M Quick-Chg Discs
  • 4" Mounted Flare Cup Brush
  • Cones & Plugs
  • 4" Felt Wheels
  • 2" Type-M Non-Woven QC Disc
  • Wheels, T-1 Unitized
  • Bolt Release
  • 1/4" sh Mounted Points
  • Ammonia Inhalants
  • 3" Foam-Back Discs
  • Tube Brushes
  • 1" Type-R Non-Woven QC Disc
  • 10" Concrete Cut-off Wheels
  • 1-1/2" Type-S Quick-Chg Discs
  • COL-100 Colonial Masking Tape
  • 1/2" Spiral Bands
  • 16/41" wide Vinyl Tapes
  • 3" Flannel Buffing Wheels
  • 1" T-1 Grinding Wheels
  • Surfox 104 Accessories
  • Grinding & Blending Wheels
  • 2" Flap Wheel Cup 1/4"s
  • 5" Stringer Bead Knot Wheels
  • 3/16" 320 SiC, 3-3/8 OAL 3/8 T
  • 2" Cut & Polish Wheels
  • 4" Finishing Flap Wheels
  • Rolls, Coated Abrasive
  • #3732 Packaging Tape
  • 3" Flap Brushes/Mounted Wheel
  • Portable Belts, Misc Sizes
  • Rectangular Nylox Cup Brushes
  • Burn Care
  • 5" Hook Coated Abr Discs
  • Type-S Non-Woven QC Discs
  • 4 x 72 Coated Belts
  • Non-woven Cross Buffs
  • Flared Brushes
  • Sanding Pads & Sponges
  • 5" T-27 GFX Cotton Wheels
  • 3" Knot Wire Wheels
  • 3" Tube Center Wire Wheels
  • 8-1/2" x 11" Hook Paper
  • Fiber Discs, Weiler
  • 14" PSA Coated Abr Discs
  • 3" x 1 Grinding Wheels
  • 4" Interleaf Flap Wheels
  • 6" Hook Discs, 9 dust holes
  • 10" Finishing Discs
  • 1/4" sh Resin Bond Mtd Points
  • 6" Hook Discs, 9 dust holes
  • 5" Crimped Wire Cup Brush
  • 5/16" dia Straight Cart. Rolls
  • Red Cross First Aid Kits
  • 1" 80 .040 SiC - M-Brad Power
  • Std Crimped Wire End Brushes
  • Late x Impregnated Belts
  • Outdoor Products
  • CP-83 GP MaskingTape
  • Encap ualted Cup Brushes
  • 3/8" Power Tube Brushes
  • 6" Paper Back Hook Discs
  • Weiler Polyflex Encapsulated C
  • Accessories, Non-Woven
  • 9" Hook Disc Pad, 5/8-11
  • 4" Soft/Untreated Cloth Wheel
  • 7" x 7/8 Flap Discs
  • 1/2 x 12 Coated Belts
  • 12" Hard/Treated Cloth Wheels
  • #233 Green Masking Tape
  • Festool 6" H&L Polishing Discs
  • 6+" Metal Foil Tapes
  • Wheels, Clean & Strip
  • Discs, 5" Surface Conditioning
  • 7"x7/8" T-1 Cut-off Wheels
  • 3" Nylox Wheels
  • 1-1/2 x 32 Coated Belts
  • 2 x 75 Coated Belts
  • Spiral (No-Lap) Bands
  • 10" Grinding/Bench Wheels
  • 3 x 18 Coated Belts
  • 5/8" dia Half Taper Cart. Roll
  • Wire Product Accessories
  • 1/2" wide Single Coated Foam
  • 3" Flap Wheel Cup, 1/4" s
  • 4-1/2"x5/8-11 Fiber Discs
  • 5-1/2" Metal Foil Tapes
  • 3" Felt Wheels
  • 20" Hook Coated Abr Discs
  • Stationary Belts, Misc Sizes
  • 1-1/2 x 132 Coated Belts
  • Hook & Loop Discs
  • 3" Type-S Quick Chg Disc Pads
  • 24" T-1 Cut-off Wheels
  • 12" & wider VHB Foam Tapes
  • 3-1/2" Encap Cup Brush
  • 8" Diamond Wheels
  • 3" PSA Coated Abr Discs
  • 8" T-1 Cut-off Wheels
  • 4 x 54 Non-Woven Belts
  • Wheel Mandrels/Bushings/Adapte
  • 7"x7/8" T-27 Grinding Wheels
  • 3-2/3" x 9" Paper Sheets
  • 3M Finesse-It Compounds & Fini
  • 8" Nylox Disc (Cup) Brush
  • 7" T-29 Angled Flap Discs
  • #501+ High Temperature Tape
  • 1/2" Nylox
  • 2" x 1" Non-Woven Brushes
  • Stationary Belts, Sait
  • 3" Type-R Non-Woven QC Disc
  • 2" Power Tube Brushes
  • 6" x 1" Grinding Wheels
  • 3/4" Type-R Quick-Chg Discs
  • 2 x 132 Coated Belts
  • 10" Diamond Cut-off Wheels
  • Eye Care
  • 4" Stringer Bead Knot Wheels
  • 5" T-27 Flap Discs
  • Cones & Plugs
  • 4-1/2" T-27 Flap Discs
  • 5/8" dia Full-Taper Cart. Roll
  • Backup Pads, Non-Woven
  • 6" PSA Coated Abr Discs
  • 4" T-27 Grinding Wheels
  • 6" Vinyl / Plastic Tapes
  • 3" x 1/32" Cut-off Wheels
  • 2" Vinyl / Plastic Tapes
  • 4" Cable Twist Knot Wheels
  • 6" x 1" Non-Woven Flap Brushes
  • Wall Paint Brushes
  • Blue Packaging Tapes
  • Type-M Quick Change
  • 10" Unitized Wheels
  • 3/16" Minature End Brushes
  • Counter Dusters
  • 4-1/2"x7/8" T-27 Cut-off Wheel
  • 4" x 2" Interleaf Flap Wheels
  • 6" x 7/8 Flap Discs
  • Interleaf Flap Wheels
  • 3/4" Flap Wheels, 1/4-20 Shank
  • 3 x 132 Coated Belts
  • 8+" Metal Foil Tapes
  • Walter 7" Cut-Off Wheels
  • 4" Finishing Discs
  • 3" Encapsulated Crimped Wheels
  • 1-1/4" Bulk Adh Transfer Tapes
  • G shape Abrasive Caps
  • Fitch Marking Brushes
  • 1-1/4" Nylon Abr Tube Brushes
  • Masony Cement Brushes
  • Burn Care
  • 4" Nylox Disc (Cup) Brush
  • 14" Flap Brushes
  • Type 18 R Plugs (Rounded)
  • 2-1/2" wide Single Coated Foam
  • 2" Non-Woven Rolls
  • #302 Packaging Tapes
  • 7/16" Nylon Abr Tube Brushes
  • 7" Bench Mount Grinding Wheels
  • 3" General Purpose Wheels
  • 1 x 36 Non-Woven Belts
  • 1-1/2" Flap Wheel, 1/4" shank
  • 1/2" Pilot End Wire End Brush
  • Shape "L", 1/4" Shank Burs
  • 4-1/2" 80 grit Fiber Discs
  • 6" Hook Multi-hole/Mesh Discs
  • 1/2 x 34 Coated Belts
  • Cleaners, Aqueous, Neutral
  • 24" T-1 Cut-off Wheels
  • T-1 Straight Grinding Wheels
  • 15" and larger PSA Discs
  • Wire Cup Brushes
  • 4" T-27 Cotton Cut-Off Wheels
  • Sungold Non-Woven Products
  • 9"x7/8" T-1 Cut-off Wheels
  • 4" Mounted Flare Cup Brush
  • 3/4" Rectangular Tube Brush
  • 2" Mounted Flare Cup Brush
  • 1/8 x 18 Coated Belts
  • Walter FX Surface Cleaning Dis
  • 1/4" Nylon-Filament Brush
  • 10" Deburring Wheels
  • 3" / 72mm Clear Packaging Tap
  • 7" Unitized R/A Discs
  • Small Scratch Brushes, Alum
  • 1" Minature Stem-Mounted
  • 3" Interleaf Flap Wheel
  • 5" Non-Woven Flap Discs
  • 12" Crimped Wire Wheels
  • 1" Type-R Quick-Chg Discs
  • VersaFlo Breathing Tubes
  • 1-1/16" Power Tube Brushes
  • 15/16" Tube Brushes
  • 5" Hook Discs (no holes)
  • 1-3/4" w Non-Woven Abr Rolls
  • 2" Gaffer Matte Cloth Tape
  • Pressboard Adapters
  • 2 x 30 Non-Woven Belts
  • 3" x 4-1/4" PSA Sheets
  • 14" Portable/Gas Saw Wheels
  • 6" Paper-Back PSA Discs
  • 10" Grinding/Bench Wheels
  • 8" Felt Wheels
  • 1-3/16" Power Tube Brushes
  • 5" Fiber Discs
  • 1/4 Full Taper
  • Type 16 Cones
  • 1/4" Foil Tapes
  • 4" PSA Disc Pad, 1/4" Shaft
  • 2" Power Tube Brushes
  • 5" Double-Row Knot Cup Brush
  • Detail Sponges, 3/16" thick
  • Miscellaneous Sizes
  • Walter T-1 ZIP Aluminum Cut-of
  • Weiler Knot Wire Cup Brushes -
  • 1/4 x 12 Coated Belts
  • Stainless Steel Knot Wheels
  • 8" NW Disc Holders
  • 4" T-27 Flap Discs
  • Emergency Preparedness
  • 1/2 x 24 Non-Woven Belts
  • Flap Wheels
  • 9x11 Waterproof Sheets
  • 4" Encap Crimped Wire Wheel
  • 1" Crimped Wire End Brushes
  • 3" PSA Coated Abr Discs
  • Type-R Quick-Change Discs
  • Discs, Coated Abrasive
  • 6" Metal Finishing Wheels
  • 1/4 x 13 Coated Belts
  • Blocks (Floor Rubs & Wedges)
  • 10" PSA Coated Abr Discs
  • 7"x5/8-11 T-29 Grinding Wheels
  • 4 x 106 Diamond/SuperAbr Belts
  • 3M XLR8 Hard Hats
  • 9"&larger x 5/8-11 Fiber Discs
  • 1/4:
  • 5" 36 grit Fiber Discs
  • 5/8" dia Half Taper Cart. Roll
  • 6" General Purpose Wheels
  • 5/16" Power Tube Brushes
  • Detail Sponges, Single-Sided
  • 15" Metal Foil Tapes
  • 5" Hook Coated Abr Discs
  • 5" Fiber Discs
  • 1" Coated Abrasive Rolls
  • Back-up Pads
  • Weiler 4" Knot Wire Cup Brush
  • 1-1/2" Type-S Non-Woven QC Dis
  • 5" Disc Pad, 5/8-11
  • 2 x 32 Coated Belts
  • 9" Grinding/Bench Wheels
  • 7" NT 5/8-11 Quick-Chg
  • 6" Flap Wheels
  • 2" Type-S Quick-Chg Discs
  • 2" Flap Wheels
  • 1" T-1 Grinding Wheels
  • Sweep Floor Brushes
  • 4-1/2" 60 grit Fiber Discs
  • 1 x 12 Coated Belts
  • 7" PSA Coated Abr Discs
  • 3/4"
  • B Shape Mounted Points
  • 7" T-1 Cut-off Wheels
  • 3/4" Type-R Quick Chg Disc
  • 2" Flap Wheels, 1/4-20 Q.C.
  • 3/4" Type-R Quick-Chg Discs
  • 10" Diamond Cut-off Wheels
  • 4 x 36 Coated Belts
  • 1-1/2" Flap Wheel, 1/4" shank
  • 5" Hook Coated Abr Discs
  • 4-1/2" Flap Discs, Norton
  • 1/4"" x 6"" Plain-Back Sheets
  • Walter T-28 Stainless Spin-On
  • 16" T-1 Cut-off Wheels
  • Stationary Belts, Misc Sizes
  • 2 x 30 Coated Belts
  • 5" Paper-Back PSA Discs
  • 1/2" wide VHB Foam Tapes
  • 5" Hook Multi-hole/Mesh Discs
  • 1100-**-0103 Components
  • 7/16" Nylon Abr Tube Brushes
  • 3" Type-R Quick-Chg Discs
  • 5/16" dia Half Taper Cart. Rol
  • 9" Fiber Disc Back-up Pads
  • 4" T-29 Flap Discs
  • 6 x 132 Coated Belts
  • First Aid Kits - Consumer
  • 4-1/2"x5/8-11 T-27 Grind Wheel
  • Diamond Cutting Wheels
  • 3/4 x 20-1/2 Non-Woven Belts
  • 4" Non-Woven Rolls
  • Microfiber High Perf. Cloths
  • 3/4" Type-R Quick Chg Disc
  • Walter Two-in-One Flap Discs
  • 3 x 132 Coated Belts
  • Pilot End Brushes
  • Brooms
  • 6" Cable Twist Knot Wheels
  • 1 x 21 Coated Belts
  • 6"x5/8-11 T-1 Cut-off Wheels
  • 19 x 48 Coated Belts
  • 3-1/2" Hook Coated Abr Discs
  • Flap Wheels
  • 43 x 75 Coated Belts
  • 43 x 103 Coated Belts
  • 1" General Purpose Wheels
  • 4 x 52 Coated Belts
  • CombiTwist Knot Wheels
  • 8" Flap Wheels
  • Portable Belts, Norton
  • Small Belts, Sait
  • 4" Fiber Discs
  • Walter TWIST Quick Change Meta
  • 4 x 54 Non-Woven Belts
  • 1-1/2" Type-R Quick-Chg Discs
  • 2-1/2" Nylox Wheel
  • 8" Hook Discs, 6 dust holes
  • 6" Light Finishing Whels
  • 4-9/25" Metal Foil Tapes
  • 81 mm x 133 mm PSA Sheets
  • 7"x5/8-11 T-27 Grinding Wheels
  • #3072 Recycled Corrugate Tape
  • 3/4" Spiral Bands
  • 1 x 21 Non-Woven Belts
  • Overlap Slotted Discs
  • 4" x 2" Interleaf Flap Wheels
  • 4" Mtd Flared Brushes
  • 8" Flap Wheels
  • 4" Deburring Wheels
  • 5" Hook Discs (no holes)
  • 8" MX & Metalworking Wheels
  • 5/8" dia Straight Cart. Rolls
  • Non-Woven Abrasives
  • 6 x 168 Coated Belts
  • Encapsulated Knot Wheels
  • 4"x5/8 Fiber Discs
  • 4" wide Utility Tapes
  • 1" Tube Center Wire Wheels
  • Burr-RX Disc Brushes
  • Parts: Line-Mate
  • 5/8" Miniature Stem-Mounted
  • 3-1/2 x 15-1/2 Coated Belts
  • 10" x 1" Grinding Wheels
  • 5/8" dia Cartridge Rolls
  • 5" Flaring Cup Wheels
  • 2" / 48mm Clear Packaging Tap
  • 3" Vinyl / Plastic Tapes
  • 2" Type-S Non-Woven QC Discs
  • 4-1/2" 80 grit Fiber Discs
  • Trial Packs
  • 2" Mtd Flared Brushes
  • Interleaf Flap Wheels
  • 1 x 30 Non-Woven Belts
  • 25 x 60 Non-Woven Belts
  • 5" 80 grit Fiber Discs
  • 5-1/2x9 Waterproof Sheets
  • 5" Discs, PSA, 8 dust holes
  • 6 x 79 Coated Belts
  • Surfox Marking, Etching, and I
  • 9" PSA Coated Abr Discs
  • 3" Drive Arbor for 3-4" M-Brad
  • 1/4" wide Foam Tapes
  • A Shape Non-Woven Mounted Pt
  • 12" T-1 Stationary Wheels
  • Portable/Gas Saw Wheels
  • 4-1/2"x5/8-11 T-1 Cut-off Whl
  • 2-1/2" Bulk Adh Transfer Tapes
  • 2 x 90 Non-Woven Belts
  • 3" wide Utility Tapes
  • 2-3/4 x 15-1/2 Non-Woven Belts
  • 81 mm x 133mm Hook Sheets
  • 4-1/2" Non-Woven Flap Discs
  • Flap Discs, Weiler
  • 1" wide Utility Tapes
  • 2 x 48 Coated Belts
  • 4 x 100 Coated Belts
  • Interleaf Flap Discs
  • Non-Woven Abrasive Wheels
  • 1-1/2" Type-R Quick-Chg Discs
  • 4" Fiber Disc Back-up Pads
  • Back-up Pads
  • 2" Non-Woven Hook & Loop Disc
  • 43 x 75 Coated Belts
  • Discs, Non-Woven Finishing
  • Mounted Points, 1/4" shank
  • 7" Crimped Wire Wheels
  • 1-1/2" Power Tube Brushes
  • 4" Clean & Strip Wheels
  • 2 x 34 Coated Belts
  • 14" Standard Twist Knot Wheels
  • 3 x 132 Coated Belts
  • 3-1/4"" x 5"" Hook Sheets
  • PSA Backed Sanding Discs
  • 1-1/8" Power Tube Brushes
  • 3/16 x 21 Coated Belts
  • 10" Crimped Wire Wheels
  • 5" x 5/8-11 T-27 Cut-off Whl
  • 5" 100 grit Fiber Discs
  • 7" T-28 Angled Grind Wheels
  • 1-1/2" Minature Mounted End Br
  • 1" dia Cartridge Rolls
  • 9" & larger x 7/8 Fiber Discs
  • Bio-Circle 500 Accessories
  • Mops
  • Versaflo Power Units
  • 6" Hook Disc Backup Pads
  • 1-1/4" wide VHB Foam Tapes
  • 5-3/4" Metal Foil Tapes
  • Hand Plater's Brushes
  • 1" Mounted Flap Wheels
  • Specialty / Misc Items
  • #313 Box Sealing Tape
  • 1/2" Power Tube Brushes
  • 3/4" dia Half Taper Cart. Roll
  • #472 Vinyl Tapes
  • 8" A/O Bench Grinding Wheels
  • Walter Finishing Flap Discs
  • 1/2" Rectangular Tube Brush
  • 4 x 118 Non-Woven Belts
  • 3/4" Crimped Wire End Brush
  • 6" x 1" Flap Wheels
  • Rectangular Tube Brush
  • 1-1/8 x 21 Non-Woven Belts
  • 1" Flap Wheels
  • 7"x5/8-11 Fiber Discs
  • 4-1/2" Flap Discs
  • 14" & larger Deburring Wheels
  • 8" x 1" Flap Wheels
  • 7" T-27 Grinding Wheels
  • Belts, Coated Abrasive
  • Backup Pad, 6x5/8-11 Hook
  • 8" x 2" Flap Wheels
  • 52 x 103 Coated Belts
  • 1-1/2" Power Tube Brushes
  • 1" wide Single Coated Foam
  • 3" Safety Walk Traction Tape
  • 1 x 18 Coated Belts
  • 1 x 42 Non-Woven Belts
  • 3" Type-S Non-Woven QC Discs
  • Sheets, Plain-Backed
  • 6" Film-Back Hook/Loop Discs
  • 4" Felt Polishing Flap Wheels
  • Burrite Brush Holders
  • Straight (T-1) Cut-off Wheels
  • 2" Coated Abrasive Rolls
  • 5" Hook Discs, 8 dust holes
  • 1/8 x 18 Coated Belts
  • 3/4" Side-Wall Cartridge Roll
  • 1/4" ATG Adh Transfer Tapes
  • 6" General Purpose Wheels
  • 4 x 84 Coated Belts
  • Polishing & Buffing Pads
  • 2-3/4" Power Tube Brush
  • 3" Trim-Kut Discs
  • Nylox Cup Brushes
  • 4-1/2" T-27 Grinding Wheels
  • 3-2/3" x 9" Plain-Back Sheets
  • 1-1/2" dia Cartridge Rolls
  • 6" Non-Woven Flap Brushes
  • 7/8""d Tapered Spiral Band
  • Hard / Treated Cloth Wheels
  • 4" Fiber Discs
  • 7" T-28 Angled Grind Wheels
  • Strap Polishing Belts
  • First Aid Refill - Medications
  • Wire Wheels
  • Shoe Handle Scratch Brushes
  • Bridled Knot Cup Brushes
  • Mounted Wire Brushes for Die G
  • 10" Plain-back Discs
  • 2" Felt Polishing Flap Wheels
  • 1/2" wide Single Coated Foam
  • 4-1/2"x5/8-11 Fiber Discs
  • Cartridge Roll Mandrels
  • #864 Reinforced Strapping Tape
  • Flap Discs, Coated Abrasive
  • Back-up Pads, Fiber Discs
  • 1/8" dia Cartridge Rolls
  • 13/16" Nylon Abr Tube Brushes
  • 12" General Purpose Wheels
  • 3" wide VHB Foam Tapes
  • 5" Hook Coated Abr Discs
  • 1-1/2" Flap Wheel, 1/4-20 Q.C
  • 7"x7/8" T-29 Grinding Wheels
  • 2-3/4" x 16-1/2" Plain Sheets
  • SS Curved Handle Scratch Brush
  • 3/8" wide Single Coated Foam
  • Walter Quick-Step Felt Discs
  • 1-3/4" Power Tube Brush
  • 4"x1/4 Fiber Discs
  • 1/2" ATG Adh Transfer Tapes
  • 1/2 x 24 Coated Belts
  • 7" Non-Woven Hook & Loop Disc
  • 1" Felt Polishing Flap Wheels
  • 4" Coated Abrasive Rolls
  • 4-1/2" Flap Brushes/Wheels
  • 5" x 5/8-11 Fiber Discs
  • 25 x 48 Coated Belts
  • 7" Diamond Wheels
  • 4" x 5/8" AH Flap Discs
  • 1 x 12 Coated Belts
  • Knot Wire End Brushes
  • 4 x 48 Coated Belts
  • 4"x5/8 Fiber Discs
  • Dressing Stones & Blocks
  • Polishing & Buffing Discs
  • 6" Flap Wheels
  • 1-1/2" NW Disc Holders
  • 4" x 1/16" Cut-off Wheels
  • 4-1/2" T-27 Grinding Wheels
  • 2" Non-Woven Rolls
  • 4-7/8" CombiTwist Wheel
  • 11/32" Power Tube Brushes
  • 10" Concrete Cut-off Wheels
  • 14" Nylox Disc (Cup) Brush
  • 1 x 30 Coated Belts
  • 1/2" dia Half Taper Cart. Roll
  • 2" Type-S Quick-Chg Discs
  • 3/8 x 18 Coated Belts
  • 1/2" Encapsulated Wire Brush
  • Bushings
  • T-1 Cotton Fiber Wheels
  • Festool 3" Platin Hook Foam Back Discs
  • 4-7/8" Stringer Bead Knot Whls
  • Silver Braze Mig Wire
  • 11" Hook Discs (no holes)
  • 8" Clean & Finish Wheels
  • File Belts, Misc Sizes
  • Sheets, Plain-Backed
  • 1/8" sh Vitrified Mtd Points
  • 7" Fiber Discs
  • Discs, Foam-backed
  • 4" wide VHB Foam Tapes
  • 3" Flap Wheels
  • Festool 9" Granat H&L Sanding Discs
  • 6" x 2" Flap Wheels
  • 5" x 7/8 T-1 Cut-off Wheels
  • 1-1/2" Type-S Non-Woven QC Dis
  • 3" Finishing Flap Wheels
  • 4-1/2" T-27 Flap Discs
  • 4 x 36 Coated Belts
  • 8" Discs, PSA, no dust holes
  • 2-1/2" Knot Wire Wheels
  • 4 x 54 Coated Belts
  • 3 x 60 Coated Belts
  • 4" T-27 Grinding Wheels
  • 2" Square Pads
  • 5/8" Minature Knot Wheel
  • Screwdrivers & Impact Drivers
  • Festool 7-1/4" Saphir H&L Discs
  • 11" Metal Foil Tapes
  • 3/4" Rectangular Tube Brush
  • Deburring Wheels
  • 75 mm x 110 mm Hook Sheets
  • Machinery Lubricants
  • 7" Fiber Discs
  • 4" x 4" Interleaf Flap Wheels
  • 3/4" Knot Wire End Brush
  • 7"x7/8" T-27 Grinding Wheels
  • Walter Quick-Step High Polish
  • 1-1/2" Flap Wheel, 1/4-20 Q.C.
  • Wire Wheels
  • 11/16" Power Tube Brushes
  • 7/8"" x 4-1/2"" Hook Sheets
  • 6 x 60 Non-Woven Belts
  • 2-1/4" Power Tube Brushes
  • 3/4" Controlled Flare End Br
  • 2" Type-R Quick Chg Disc Pads
  • 7" T-27 GFX Cotton Wheels
  • #8067 All Weather Flash Tape
  • 8" x 2" Flap Wheels
  • 3/4" Type-S Non-Woven QC Discs
  • 5" Fiber Discs
  • Hook Non-Woven Discs
  • 1/4" Banded Crimped End Brush
  • Soft / Untreated Cloth Wheels
  • Rolls, Non-Woven
  • Files
  • 4-1/2" 50 grit Fiber Discs
  • First Aid Refill - Medications
  • 9"x5/8-11 T-27 Grinding Wheels
  • 14" Bench Mount Grinding Whee
  • 6 x 79 Coated Belts
  • 12" PSA Coated Abr Discs
  • 2" Type-M Quick-Chg Discs
  • Walter Quick-Step Backing Pads
  • 1101-**-0103 Components
  • 1/8 x 12 Coated Belts
  • 4-1/2" Fiber Discs
  • First Aid Kits - Unitized Pack
  • TrueFit Standard Gloves
  • 1" dia Full-Taper Cart. Rolls
  • 1/2" Power Tube Brushes
  • 6" Plater's Wire Wheels
  • 9" PSA Coated Abr Discs
  • Type 19 Plugs
  • Crimped Wire Cup Brushes
  • 1/4" Crimped Mtd Wheels
  • 9" Fiber Disc Back-up Pads
  • 1" dia Straight Cart. Rolls
  • 5" T-28 Angled Grind Wheels
  • Wide Belts, SiaCapco
  • SmartCompliance Refills
  • 5" 50 grit Fiber Discs
  • 4" T-1 GFX Cotton Fiber Wheels
  • 4 x 36 Coated Belts
  • #433 High Temp Alu Foil Tape
  • 2 x 60 Non-Woven Belts
  • 2" NW Disc Holders
  • #420 DarkSilver Lead Foil Tape
  • 3" T-1 Cotton Bond Cut-Off Wh
  • 3 x 21 Non-woven Belts
  • Trial Kits
  • 6" Hook Discs, 9 dust holes
  • Hand Blocks & Holders
  • 12" Diamond Wheels
  • 9" x 11" Plain-Back Sheets
  • 2" x 1" Non-Woven Brushes
  • 4" PSA Coated Abr Discs
  • 10" x 1-1/2" Grinding Wheels
  • 1" Type-S Quick-Chg Discs
  • 8" Foam-Back Discs
  • 5" x 5/8-11 Flap Discs
  • Belts, Sia Abrasives
  • Weiler Crimped Wire Cup Brushe
  • 6 x 103 Coated Belts
  • Quick-Change (Spin-on) Discs
  • Festool 1-1/2" Sanding Discs D36
  • 52 x 103 Coated Belts
  • 1/2 x 60 Coated Belts
  • 4" Fiber Discs
  • 1-1/2" Type-R Non-Woven QC Dis
  • Quick Change (Spin-On) Discs
  • 7/8" Nylon Abr Tube Brushes
  • 1 x 30 Coated Belts
  • Flap Discs, Non-Woven
  • 8" Nylox Wheels
  • 12" Standard Twist Knot Wheels
  • 1" Flap Wheels, 1/4" shank
  • 4" Unitized Wheels
  • 1" ATG Adh Transfer Tapes
  • 6 x 300 Coated Belts
  • 7" Knot Bevel Wheels
  • Mandrels, Spiral Band
  • Full-Taper Cartridge Rolls
  • 1" Full Taper Cartridge Rolls
  • 3/8" 320 .022 SiC - M-Brad Pow
  • 5" Nylox Disc (Cup) Brush
  • 2-1/2" Cut-off Wheels
  • 3/4 x 20-1/2 Coated Belts
  • 1 x 32 Non-Woven Belts
  • Hand Pads, Non-Woven
  • Type 18R Plugs (Rounded)
  • 6" Hook Discs, 8 dust holes
  • First Responder Packs/Bags
  • 3/4" Pilot End Wire End Brush
  • Non-Woven Spiral Bands
  • File Belts, Misc Sizes
  • Interleaf Flap Discs
  • 6 x 264 Non-Woven Belts
  • 4 x 76 Coated Belts
  • 5-3/8 x 15-1/2 Non-Woven Belts
  • Hook & Loop Discs
  • Cones, Plugs, Mounted Points
  • 2-3/4" x 17-1/2" PSA Sheets
  • 7" SiC Green Bench Wheels
  • 3 x 72 Non-Woven Belts
  • Spiral (No-Lap) Bands
  • Walter T-Lock Belts
  • 2" Nylon Wheels
  • Quick Change (Spin-On) Discs
  • 1-1/2"d Flap Wheels
  • 4 x 54 Coated Belts
  • 2-3/4" .010 CS 1/4" Sh E3 Enca
  • 1-1/2" dia Straight Cartridge
  • 4" Hook Disc Pad, 5/8-11
  • 4-1/2" Non-Woven Flap Disc
  • 3M 3-1/4 in Finesse-It Buff &
  • 2-3/4" x 16-1/2" Hook Sheets
  • Bevel Cup Brushes
  • 1-1/4" Circular Flared End Br
  • 2" Flap Wheels
  • Wheel Mandrels/Bushings/Adapte
  • 3/8 x 12 Coated Belts
  • Flap Wheels, Non-Woven
  • 7-1/2" Metal Foil Tapes
  • #101+ Economy Masking Tape
  • 1/2 x 60 Coated Belts
  • 1 x 132 Coated Belts
  • 7/16" Power Tube Brushes
  • 4-1/2"x5/8-11 T-27 Cut-off Whl
  • 1" Type-S Quick-Chg Discs
  • 6 x 79 Coated Belts
  • Walter ZIPOne Cut-Off Wheels
  • Miscellaneous File Belts
  • Masonry Drills
  • 6" T-1 Grinding/Bench Wheels
  • 2-3/4" x 16-1/2" PSA Sheets
  • 1/4 x 24 Non-Woven Belts
  • Tapes
  • Mandrels
  • 1 x 42 Non-Woven Belts
  • #4910 VHB Foam Tape
  • 3-2/3" x 9" Cloth Sheets
  • 1-3/8" Nylox Wheels
  • Truefit Economy Gloves
  • 3-1/4" Metal Foil Tapes
  • Tampico/Fiber Bristle Wheels
  • Cup Wheels
  • B Shape Mounted Points
  • #401+ High Performance Green
  • 2-1/2" Flap Wheels, 1/4" shank
  • 18" x 18" Plain-Back Sheets
  • 6" Finishing Wheels
  • 13/16" Encapsulated Tube Brush
  • 10" SiC Green Bench Wheels
  • 7" T-27 Cut-off Wheels
  • #3051 Low Tack Paper Tape
  • 2-1/2" Flap Wheel Cup 1/4"s
  • Stationary Belts, Misc Sizes
  • 1-1/4" Spiral Bands
  • Flap Discs, Non-Woven
  • 5" PSA Disc Pads, Bolt-on
  • 1/4 x 18 Non-Woven Belts
  • 2-15/31" Metal Foil Tapes
  • #4201 Lead Foil Tape
  • 4" x 2" Flap Wheels
  • 4-1/2" x 7/8 Flap Discs
  • 1/2" Banded Crimped End Brush
  • 3" Mounted Flare Cup Brush
  • Maintenance - Cleaning Brushes
  • 4" 3/8"ch T-1 Cut-off Wheels
  • 2 x 18-15/16 Non-Woven Belts
  • Fiber Discs, Norton
  • 1" Interleaf Flap Wheel
  • Rectangular (Flat) Tube Brush
  • 7/8" wide Foam Tapes
  • 8" Hook Coated Abr Discs
  • 1/4 x 18 Coated Abr Belts
  • 3" Type-S Quick-Chg Discs
  • 7" Non-Woven Hook & Loop Disc
  • 1/2" Encap End Brush
  • 1/4" wide VHB Foam Tapes
  • 3" x .035 Cut-off Wheels
  • Diamond Discs, Hook Back
  • Cushioned Abrasive Finishing Kits
  • Felt Flap Wheels
  • 5" T-27 Cut-off Wheels
  • 54 x 103 Coated Belts
  • 10" Sanding Star
  • 2" Type-S Quick-Chg Discs
  • Z-Foam Profile Sponges
  • 12" PSA Coated Abr Discs
  • Walter T-27 HP XX Grinding Whe
  • 5" Dbl Row Knot Wheels
  • 38 mm Metal Foil Tapes
  • 3/4" Type-S Quick-Chg Discs
  • Clean & Strip Discs
  • 5" Soft/Untreated Cloth Wheel
  • 3/4" Type-S Non-Woven QC Discs
  • Quick-Change (Spin-on) Discs
  • 4" wide Single Coated Foam
  • 2-1/2" Mtd Flared Brushes
  • 3/4" Power Tube Brushes
  • 6" Film-Back PSA Discs
  • School Preparedness
  • 6" A/O GP Bench Wheels
  • Brush/Sweep Handles
  • Rubber Abrasives
  • 54 x 103 Coated Belts
  • 1 x 18 Non-Woven Belts
  • Wheels for Concrete
  • 3" x 6" PSA Sheets
  • Plain-Back Abrasive Rolls
  • Shape "M", 1/4" Shank Burs
  • #119 Scotch Magic Tape
  • 1-1/2" 36mm Clear Package Tap
  • 1/8" Shank Burs
  • 25 x 48 Non-Woven Belts
  • Flap Discs, Arc
  • #34383 Aluminum Foil Tape
  • 2 x 48 Non-Woven Belts
  • 1-1/2" Finishing Flap Wheels
  • Abrasive Wheels
  • T-28 Angled Grinding Wheels
  • 4-1/2" Interleaf Flap Disc
  • 7"x7/8" T-29 Grinding Wheels
  • 6" x 5/8"-11 Flap Discs
  • 11-1/2" Metal Foil Tapes
  • 6" Flap Wheels
  • 10" dia & larger Flap Wheels
  • Flap Discs, Carborundum
  • Dressing Stones & Blocks
  • 3/8" Hand Tube Brush
  • 5" T-1 MTX Cotton Fiber Wheels
  • 6"x5/8-11 T-27 Cut-off Wheels
  • Wheels, General Purpose
  • Festool 7" Granat H&L Sanding Discs
  • 6" Discs, PSA, no dust holes,
  • 4-3/16x11 SiC Waterproof Sa
  • Hook & Loop Discs
  • Double-Sided Foam Tape x Color
  • 5/8" dia Straight Cart. Rolls
  • Cloth Back Sheets
  • Waterproof Wet/Dry Sheets
  • 5" Hook Disc Backup Pads
  • 7"x7/8" T-27 Grinding Wheels
  • 37 x 75 Non-Woven Belts
  • 4 x 168 Coated Belts
  • 7" T-29 Angled Flap Discs
  • Flap Wheels, Non-Woven
  • 1" Type-S Non-Woven QC Discs
  • 2 x 36 Coated Belts
  • Sandblast Stencil Tapes
  • Clean & Strip Discs
  • Kits
  • 2 x 72 Coated Belts
  • 1-3/16" Flap Wheels, 1/8" sh
  • 1/4" dia Straight Cart. Rolls
  • Non-Woven File Belts, Norton
  • Street Brooms
  • 6 x 90 Coated Belts
  • Plater's Brass Wheels
  • 1-1/4" Spiral Bands
  • Encapsulated Crimped End Brus
  • Double-Sided Tapes x Width
  • 1/2 x 18 Non-Woven Belts
  • 1-1/2" dia Straight Cartridge
  • 3" wide Foam Tapes
  • 44 x 85 Coated Belts
  • 2" Felt T-27 Mini Flap Disc
  • 1/8" sh Cotton Fiber Mtd Point
  • 4" Single Row Knot Cup Brush
  • Diamond Cutting Wheels
  • 5" Fiber Discs
  • Flap Discs, Non-Woven
  • Discs, Non-Woven
  • Non-Woven Mounted Points
  • 6" Euro-9 Hook Discs, Blue
  • 2-3/4" Circular Flared End Br
  • Lubricating Sticks
  • Sanding Pads & Sponges
  • Straight Cartridge Rolls
  • 1/8" sh Cotton Fiber Mtd Point
  • 1300-**-0103 Components
  • 4-1/2" T-29 Flap Discs
  • 1-1/2" Power Tube Brushes
  • 5" Unitized Wheels
  • 3/4" dia Straight Cart. Rolls
  • 25 x 60 Coated Belts
  • Wide Belts, Carborundum
  • 4-1/2" 60 grit Fiber Discs
  • 1/2 x 30 Coated Belts
  • 6" Hook Disc Pad, 6 dust holes
  • Walter 1/4" ALU Grinding Whee
  • Parts for Versaflo Components
  • Wide Belts, Misc Sizes
  • 14" Portable/Gas Saw Wheels
  • 3/4" dia Half Taper Cart. Roll
  • 6" Interleaf Flap Wheels
  • 9" x 11" Plain-Back Sheets
  • 1-3/8" Tube Center Wire Wheels
  • 43 x 60 Coated Belts
  • 3-1/2" Encap Cup Brush
  • 2" Unitized Wheels
  • 44 x 75 Coated Belts
  • 1-1/2" .035 SiC - 180 1/2" A.H
  • Specialty Abrasives
  • Wound Dressings
  • Sanding disc
  • 1" Type-M Quick-Chg Discs
  • 2" Type-R Quick-Chg Discs
  • 5" PSA Coated Abr Discs
  • Specialty / Misc Items
  • Extended Width & Master Rolls
  • 7" T-29 Grinding Wheels
  • 72 mm Foil Tapes
  • 9"x5/8-11 T-29 Grinding Wheels
  • 5" Discs, PSA, 5 dust holes
  • Grease Sticks
  • 1/4" Spiral Bands
  • 3/8" dia Half Taper Cart. Roll
  • 4" Nylox Disc (Cup) Brush
  • 3-1/2" PSA Coated Abr Discs
  • Radiator Brush
  • 5" Flap Discs
  • 7" 120 grit Fiber Discs
  • 7" Fiber Discs
  • 7" T-1 Cut-off Wheels
  • 5" Non-Woven Hook & Loop Disc
  • 4-" Diamond Wheels
  • 1" Type-M Quick-Chg Discs
  • 3" Type-R Quick Chg Disc Pads
  • Belts, Coated Abrasive
  • 1/4 x 13 Non-Woven Belts
  • 3-1/2" PSA Disc Pad
  • 2-3/4" x 17-1/2" PSA Sheets
  • Cement Brushes
  • 1 x 18 Coated Belts
  • 2-1/2 x 14 Coated Belts
  • 3" Trim-Kut Disc Pad
  • 7" Hook Disc Pad, no dust hole
  • Wire Brush Adapters
  • 3" T-27 Grinding Wheels
  • 6" (144mm) Crepe Masking Tape
  • 5" Hard / Treated Cloth Wheel
  • 1/4" Minature Stem-Mounted
  • 5" Fiber Disc Back-up Pads
  • Type 16 Cones
  • 1" dia Cartridge Rolls
  • 10" Standard Twist Knot Wheels
  • 9" Hook Disc Backup Pads
  • 10+" Aluminum Foil Tapes
  • T-27 Depress Center Cut-off Wh
  • 4-1/2" Hook Non-Woven Discs
  • 4-1/2" T-27 Cotton Fiber Disc
  • Weiler 4" Knot Wire Cup Brush
  • 3" Power Tube Brush
  • 48" Safety Walk Traction Tape
  • 4-1/2" Stringer Bead Wheels
  • 1-1/2" Felt Flap Wheels
  • 6" Nylon Wheels
  • 8" Encapsulated Crimped Wheels
  • Walter Blendex Unitized Mounte
  • Small Scratch Brushes, Brass
  • 4-1/2" Flap Wheels
  • 1/2" Spiral Bands
  • 3 x 24 Non-Woven Belts
  • 1" Type-S Non-Woven QC Discs
  • PSA Backed Sanding Discs
  • 7" x 14" Grinding Wheels
  • 3/8" Vinyl / Plastic Tapes
  • Triangle & Teardrop Sheets
  • Versaflo TR-800 Series Powered Air Purifying Respirators
  • Miniature Stem-Mounted Brushes
  • 8" Hook Discs, 8 dust holes
  • 4" Clean & Strip Discs
  • 6" Hook Discs (no holes)
  • 16" Vinyl / Plastic Tapes
  • #233 TAN Masking Tape
  • Walter Cloth Drum Belts
  • Quick-Change (Spin-on) Discs
  • Weiler 6" Knot Wire Cup Brush
  • 500 mm Metal Foil Tapes
  • Nylox Stem Mounted Products
  • 36" Safety Walk Traction Tape
  • Sanding Star Mandrels
  • 7/8" Rectangular Tube Brush
  • 6" Flap Discs
  • 2" Non-Woven Spindle Mount Di
  • 5/8" Miniature Wheels
  • Wide Belts, Misc Sizes
  • #4624 VHB Foam Tape
  • Non-Woven Abrasive Wheels
  • 2" Type-S Non-Woven QC Discs
  • Walter 8" Cut-Off Wheels
  • 3" .035 SiC - 180 1/4" Stem, M
  • 5/16" Rectangular Tube Brush
  • 8" Hook Discs, 6 dust holes
  • 1-1/2" PSA Coated Abr Discs
  • 4-1/2" Knot Bevel Wheels
  • 1-1/2" Flap Wheels
  • 3/8" dia Straight Cart. Rolls
  • Specialty / Misc Items
  • 6" Foam-Back Discs
  • 7" Non-Woven Discs
  • 11/16" Power Tube Brushes
  • 6" PSA Discs, Gold
  • MX Plus Mounted Points
  • Type 18 Plugs
  • Flap Discs, Non-Woven
  • 3" Mini Flap Discs
  • 2-1/2 x 60 Non-Woven Belts
  • 7" T-27 Grinding Wheels
  • 1/4" dia Half Taper Cart. Roll
  • Walter 12"+ Cut-Off Wheels
  • 5" Non-Woven Flap Disc
  • Walter T-27 HP XX Spin-On Grin
  • 9" x 11" Hook Back Sheets
  • 25 x 75 Coated Belts
  • 15/16" Nylon Abr Tube Brushes
  • 4" 1/4"ch T-1 Cut-off Wheels
  • 7" x 5/8-11 Flap Discs
  • Wide Non-Woven Belts
  • 3" Non-Woven Hook & Loop Disc
  • 1/2 x 44 Coated Belts
  • 6" T-27 Cut-off Wheels
  • F4960PC VHB Foam Tape
  • 37 x 75 Coated Belts
  • 9/16" Minature Stem-Mounted
  • 1 x 42 Coated Belts
  • Non-Woven Abrasives, Sia
  • Type-M Quick Change
  • Single-Coated Foam (by width)
  • 4-1/2" x 7/8 Flap Discs
  • Discs, 4-1/2" Surface Conditio
  • Walter FX Drums
  • Small Belts, Norton
  • 5" x 7/8 Flap Discs
  • 12" & wider VHB Foam Tapes
  • Walter 2" T-1 ZIP Cut-Off Whe
  • #3313 Copper Conductive Tape
  • 3/8" Flap Wheels, 1/8" Shank
  • 7" T-27 GFX Cotton Fiber Wheel
  • 5" 36 grit Fiber Discs
  • 4" Metal Foil Tapes
  • 6" PSA Disc Pad, 8 dust holes
  • Sheets, Coated Abrasive
  • 6 x 60 Coated Belts
  • 16" Bulk Adh Transfer Tapes
  • 4-1/2" Fiber Disc Back-up Pad
  • 4"x5/8 Fiber Discs
  • 6 x 186 Non-Woven Belts
  • 6" x 1" Grinding Wheels
  • 28" Metal Foil Tapes
  • 3 x 15-1/2 Coated Belts
  • Double Row Knot Cup Brushes
  • 5/8" Miniature Wheels
  • 5" T-27 Flap Discs
  • Walter 3/32" Pipefitter Grind
  • 5/16" Hand Tube Brush
  • 1/4" dia Cartridge Rolls
  • Weiler 6" Crimped Wire Cup Br
  • 9"x5/8-11 T-29 Grinding Wheels
  • Quick Change (Spin-On) Discs
  • 12" Portable/Gas Saw Wheels
  • First Aid Kits - Specialty
  • 150 mm Metal Foil Tapes
  • 4 1/2 x 1/4 Grinding Wheels
  • 63 x 103 Coated Belts
  • Cleaning Brushes
  • 3/8" Mini Flap Wheels
  • 482 mm Metal Foil Tapes
  • Wound Dressings
  • 3/4" Type-S Quick-Chg Discs
  • Seamless (Taper) Caps
  • 5-1/2" x 9" Paper Sheets
  • 3" Nylox Disc (Cup) Brush
  • 2" Type-S Non-Woven QC Discs
  • 6 x 132 Coated Belts
  • 14" A/O Bench Grinding Wheels
  • #3302 Aluminu Conductive Tape
  • Belts, Coated Abrasive
  • 5" Hook Coated Abr Discs
  • 4" Fiber Discs
  • 5" Hook Multi-hole/Mesh Discs
  • Stencil Brushes
  • Medications/Tablets
  • 9" T-29 Cotton Fiber Wheels
  • 1/4" x 6" Plain-Back Sheets
  • 7"x5/8-11 T-29 Grinding Wheels
  • 5" PSA Coated Abr Discs
  • 3/8" Hand Tube Brush
  • 6" Crimped Wire Cup Brush
  • 5/16" Minature End Brushes
  • 10" Encapsulated Crimped Wheel
  • 4" Safety Walk Traction Tape
  • 1/2" Crown Composite Staples
  • 5"x5/8-11 T-27 Grinding Wheels
  • #4380 Aluminum Foil Tape
  • Crimped Nylox Cup/Disc Brushes
  • 12" Grinding/Bench Wheels
  • 9" 80 Rectangular Filament, Si
  • 4" T-1 Cotton Bond Cut-Off Wh
  • 4" Coated Abrasive Rolls
  • 7/16" Rectangular Tube Brush
  • 3/8" Stem SiC Bore-Rx Brushes
  • 4-1/2" Flap Wheels
  • 6" x 1" Flap Wheels
  • #313 Scotch Box Sealing Tape
  • 7" PSA Coated Abr Discs
  • .59" Bulk Adh Transfer Tapes
  • 12" Nylox Wheels
  • Non-Woven Belts, Weiler
  • 1/4" Power Tube Brushes
  • Electric RO Sander Accessories
  • Overlap Slotted Discs
  • 12" Diamond Wheels
  • 3 x 7-1/4 & 7-3/8 Coated Belts
  • CS Shoe Handle Scratch Brushes
  • 6" x 7/8 T-27 Grinding Wheels
  • 3-2/3" x 9" Waterproof Sheets
  • 1-1/4" Tube Center Wire Wheels
  • Stepped dia. Power Tube Brush
  • 2 x 30 Non-Woven Belts
  • 3/4" Interleaf Flap Wheels
  • Combo-Block Profile Sponges
  • 3/4 x 24 Non-Woven Belts
  • Full-Taper Cartridge Rolls
  • 2" Interleaf Flap Discs
  • 4-1/2" x 1-3/8" Hook Sheets
  • 4-1/2" T-1 Cut-off Wheels
  • 1350-**-0103 Components
  • 12" .040 SiC - 80 2" A.H., M-B
  • 3 x 90 Coated Belts
  • 6" Nylox Disc (Cup) Brush
  • 3" .040 SiC - 120 1/2" A.H., M
  • 10" SiC Green Bench Wheels
  • 4-1/2" x 5-1/2" Plain Sheets
  • 7" x 1/16" Cut-off Wheels
  • 5-1/2" x 6.8" Hook Sheets
  • 1-1/2" Coated Abrasive Rolls
  • Coated Abrasives, Carborundum
  • 1/4" Banded Nylox End Brush
  • 5" x 5/8-11 Flap Discs
  • Gun Cleaning Brushes
  • 4"x7/8 Fiber Discs
  • 5" x 7/8 Flap Discs
  • 9" & larger Fiber Discs
  • 1/2" Bulk Adh Transfer Tapes
  • 3M 3 in Finesse-It Disc Rolls
  • Varnish Brushes
  • 4-1/2" 60 grit Fiber Discs
  • Wheel Adaptor, 4" x 1/2" AH,
  • 7" Hook Discs, No Dust Hole
  • #601 Premium Packaging Tape
  • 2" Unitized Wheels
  • Coated Abrasives, Weiler
  • Walter 3" Cut-off Wheels
  • 12" Nylox Disc (Cup) Brush
  • 3" Type-S Non-Woven QC Discs
  • 4" T-1 Cut-off Wheels
  • 3 x 7-1/2 Non-Woven Belts
  • 1-1/2" Type-M Quick-Chg Discs
  • Threaded Adaptors
  • 75 mm x 110 mm Hook Sheets
  • 3" Crimped Wire Wheels
  • 7972 EVA Foam-Back Discs
  • 4"x5/8 Fiber Discs
  • Miscellaneous
  • 6" Non-Woven Hook & Loop Disc
  • Mounted Points, Cotton Fiber
  • 2-7/8" Metal Foil Tapes
  • Nylon & Tampico Wheels
  • Nylon Filament Products
  • 5" Hook Diamond/SuperAbr Disc
  • 1/2" dia Straight Cart. Rolls
  • 4 x 132 Non-Woven Belts
  • Clean & Strip Discs
  • 6" PSA, Multi-hole/Mesh
  • Hand Pads & Sponges
  • Discs, 6" Surface Conditioning
  • 1/4" sh Resin Bond Mtd Points
  • 4" Type-R Non-Woven QC Disc
  • 9" T-29 Grinding Wheels
  • 5" Flap Discs
  • 3/8" Mini Flap Wheels
  • 7" T-29 Angled Flap Discs
  • Back-up Pads
  • 2" Felt T-27 Mini Flap Disc
  • 6" PSA Disc Backup Pads
  • 7" PSA Coated Abr Discs
  • 8" Hook Multi-hole/Mesh Discs
  • 1" Cut & Polish Wheels
  • 7" Non-Woven Hook & Loop Disc
  • 4 x 72 Coated Belts
  • Wheels, Metalworking & MX
  • 2" Type-R Cotton QC Disc
  • #372 Box Sealing Tape
  • 1-1/2" Type-R Quick-Chg Discs
  • 11" High Strength Discs
  • 7" T-29 Grinding Wheels
  • #4318 Single Coated Foam Tape
  • 6" Crimped Wire Cup Brush
  • 3" .040 SiC 80 Round Filament,
  • 1-1/2" Type-S Non-Woven QC Dis
  • 7"x7/8 Fiber Discs
  • 2" Flap Wheels, 1/4-20 Q.C.
  • 4-1/2" Surface Conditioning
  • Rolls, Non-Woven
  • 37 x 60 Coated Belts
  • 9" T-29 MTX Cotton Fiber Wheel
  • 1/2 x 18 Non-Woven Belts
  • 30" Metal Foil Tapes
  • 6" Hook Discs, 6 dust holes
  • 5/8" Flap Wheels, 1/8" Shank
  • 1/4 x 24 Non-Woven Belts
  • 8" x 1" Flap Wheels
  • 1" Rectangular Tube Brush
  • 4" x 4" Flap Wheels
  • 5" T-29 Angled Flap Discs
  • 3" 1/4"ch T-1 Cut-off Wheels
  • File Belt Sanders
  • 6" Hook Discs, 8 dust holes
  • 14" Sisal Fabric Wheels
  • 8" Soft/Untreated Cloth Wheel
  • 3" Finishing Discs
  • Diamond/SuperAbr Discs
  • 7" Bench Mount Grinding Wheel
  • 3/4" Type-S Non-Woven QC Discs
  • Portable Belts, Sait
  • Tapes
  • 1/2 x 72 Non-Woven Belts
  • 6" Deburring Wheels
  • 4" Double Row Knot Brush
  • 1-1/4" Power Tube Brushes
  • Backup Pads, Hook & Loop
  • 2" Felt T-27 Mini Flap Disc
  • 6" x 5/8"-11 Flap Discs
  • 2-1/2" .022 SiC - 320 5/8 A.H.
  • 54 x 103 Coated Belts
  • 7" PSA Coated Abr Discs
  • 1050-**-0103 Components
  • Hand Plater's Brushes
  • 2-1/2 x 60 Coated Belts
  • 5" Quick-Change Disc Pads
  • 1-1/2 x 30 Coated Belts
  • 1-5/8" Flap Wheel, 1/4" shank
  • 8" Crimped Wire Wheels
  • 12" Cut & Polish Wheels
  • 6 x 264 Coated Belts
  • 4" x 4" Non-Woven Wheels
  • 2-1/2 x 60 Coated Belts
  • Shape "E", 1/8" Shank Burs
  • Flap Brushes, Non-Woven
  • 11" Hook Discs (no holes)
  • 9" Grinding/Bench Wheels
  • 5" Felt Polishing Discs
  • Portable Belts, Non-Woven
  • Single Row Knot Cup Brush
  • 10" Nylon Filament Wheel
  • 6" T-27 Cut-off Wheels
  • 4-1/2" Flap Wheels
  • 3-2/3" x 7" PSA Sheets
  • 2 x 34 Coated Belts
  • 1-1/2x25 T-Lock Tabbed Belts
  • 8" PSA Coated Abr Discs
  • SiaFoam 7970 PU Foam
  • Discs, 4-1/2" Surface Conditio
  • 8" Hook Disc Pad, Bolt-on
  • 1/2" dia Full-Taper Cart. Roll
  • Cable Twist Knot Wheels
  • 7" Polishing Pads
  • 4" Flap Wheels
  • 2" Tube Center Wire Wheels
  • 1.2 x 24 Non-woven Belts
  • 2" Type-S Quick-Chg Discs
  • 4" x 3/8-24 Flap Discs
  • Miscellaneous
  • 5" Unitized R/A Discs
  • 4" T-27 Flap Discs
  • 12" Deburring Wheels
  • 1" Mounted Flap Wheels
  • 5-1/2" x 9" Plain-Back Sheets
  • 1/2 x 42 Non-Woven Belts
  • 1-1/2" Type-R Non-Woven QC Dis
  • 2" Type-R Non-Woven QC Disc
  • 10" T-1 Stationary Wheels
  • 2 x 118 Coated Belts
  • Stringer Bead Knot Wheels
  • 7"x7/8" T-1 Cut-off Wheels
  • 6" SiC Green Bench Wheels
  • 4" Metric Hub Wheels
  • 2" x .035 Cutoff Wheels
  • 2-3/4" x 8" Hook Sheets
  • 4-1/2" x 1-3/8" Hook Sheets
  • 30 x 103 Coated Belts
  • 1/8" dia Straight Cart. Rolls
  • 8 x 90 Coated Belts
  • 6" Non-Woven Rolls
  • 3/4" dia Straight Cart. Rolls
  • 2-1/2"d Flap Wheel Brush
  • 1" Encapsulated Crimped Wheels
  • 1" Square Pads
  • Minature Mounted Wheels
  • Discs, Non-Woven Finishing
  • Type 17 Cones
  • 8-1/2x11 Waterproof Sheets
  • Wheels, General Purpose
  • 4" Nylox Disc (Cup) Brush
  • 9/16" Minature Knot Wheel
  • 9/16" Power Tube Brushes
  • 2" Mini Flap Discs
  • 7" A/O Bench Grinding Wheels
  • 4-1/2"x7/8" T-27 Grind Wheels
  • 4" Interleaf Flap Wheel
  • 37 x 48 Coated Belts
  • 7" A/O Bench Grinding Wheels
  • Can Scrub Brushes
  • 4" Non-Woven Flap Brushes
  • 4" 80 Rectangular Filament, Si
  • Stationary Belts, Sia
  • 1/2 x 13 Non-Woven Belts
  • Discs, 4" Surface Conditioning
  • PSA Triangle Sheets
  • 4 x 61 Coated Belts
  • 6" Discs
  • 5" Hook Disc Backup Pads
  • 15" and larger PSA Discs
  • 4" Mtd Flared Brushes
  • 3/16" Nylon Abr Tube Brushes
  • 4-1/2"x5/8-11 Fiber Discs
  • 3" PSA Coated Abr Discs
  • 2" Type-S Quick Chg Disc Pads
  • 1/2 x 132 Coated Belts
  • 8-1/2" x 11" Film-Back Sheets
  • 1/4 x 24 Coated Belts
  • 2-3/4" Crimped Wire Cup Brush
  • 12" PSA Coated Abr Discs
  • Abrasive Cap Mandrels
  • Low HP Chop Saw Wheels
  • #1751 (1 gal) Gray Part B/A Sc
  • Full-Taper Cartridge Rolls
  • 4-1/2" Polishing Discs
  • 11" Hook Coated Abr Discs
  • 6 x 48 Diamond/SuperAbr Belts
  • 6" Polishing Pads
  • 4-1/2"x7/8" T-27 Grind Wheels
  • Outdoor Products
  • 16" Diamond Wheels
  • Curved Handle Scratch Brushes
  • 9" Grinding Wheels
  • 1/2" Pilot End Wire End Brush
  • 3/4" 80 .040 SiC - M-Brad Powe
  • 1/2" dia Full-Taper Cart. Roll
  • 6" T-27 Flap Discs
  • Non-woven Cross Buffs
  • Sanding Screen Abrasive Sheets
  • 3/4" (18mm) Foil Tapes
  • Walter TWIST Quick Change Topc
  • 3-1/2" x 2-3/4" PSA Sheets
  • Discs, Coated Abrasive
  • Sheet Backup Pads
  • 1-1/2" Nylon Abr Tube Brushes
  • 2" Nylon Wheels
  • 3/16" dia Straight Cart. Rolls
  • T-27 Cotton Bond Cut-Off Wheel
  • 2" Type-R Non-Woven QC Disc
  • Squeeges
  • Stationary Belts, Weiler
  • 3" Crimped Mounted Wire Wheels
  • 3/8" Power Tube Brushes
  • Walter HP Grinding Wheels
  • 3" Type-S Non-Woven QC Discs
  • Welding Cable Reels
  • Square Pads
  • 4 x 132 Coated Belts
  • 2" T-1 Cut-off Wheels
  • 3" 80 Rectangular Filament, Si
  • 2" Unitized Wheels
  • 2-1/2" PSA Abrasive Rolls
  • #4504 Vinyl Tapes
  • 3-1/2 x 15-1/2 Coated Belts
  • 2" x 3" Grinding Wheels
  • Plater's Wire Wheels
  • 10" Diamond Cut-off Wheels
  • 1101-**-0103 Components
  • 3/8" wide Foam Tapes
  • 2" Flap Wheels, 1/4-20 Q.C.
  • 12" T-1 Stationary Wheels
  • 27" Metal Foil Tapes
  • 37 x 60 Coated Belts
  • 3" Non-Woven Hook & Loop Disc
  • 1-1/8" Rectangular Tube Brush
  • 1/2" Spiral Bands
  • Finger Buffs
  • 3" Flap Wheels, 1/4" shank
  • 12" & Larger Hook Discs
  • Small Scratch Brushes, Nylon
  • Miscellaneous Buffs
  • SmartRack Dispensing System
  • 4 x 24 Coated Belts
  • Waterproof Wet/Dry Sheets
  • 7" 100 grit Fiber Discs
  • 3" Double Row Knot Brush
  • Flap Discs, Non-Woven
  • 6 x 90 Coated Belts
  • 3" x 4" Hook Sheets
  • 2-1/4" Power Tube Brush
  • 7" Non-Woven Flap Discs
  • Non-Woven Stars
  • 1-1/2" Type-R Quick-Chg Discs
  • 3 x 10-11/16 Non-Woven Belts
  • Festool 3" LEX 3 77 Sanding Discs
  • Weiler 6" Knot Wire Cup Brush
  • Mounted Knot Wire Wheels
  • Translucent Foam Tapes
  • Discs, Non-Woven
  • 5" 120 grit Fiber Discs
  • 6" x 1-1/2" Flap Wheels
  • 5" 60 grit Fiber Discs
  • 3/4" Type-M Quick-Chg Discs
  • Specialty First Aid Kits
  • 7" T-27 Flap Discs
  • 1 x 42 Coated Belts
  • T-27 Cotton Fiber Wheels
  • Walter Sanding
  • 3/4" Type-M Quick-Chg Discs
  • 14" Diamond Wheels
  • 5" Unitized Wheels
  • 4-1/2" T-27 Flap Discs
  • 1/2 x 24 Coated Belts
  • 1/4" / 6mm Masking Tapes
  • Gum Abrasives
  • 4" T-1 Cut-off Wheels
  • 37 x 60 Non-Woven Belts
  • 6" Hook Disc Pad, Bolt-on
  • 8" Nylox Disc (Cup) Brush
  • 1/4 x 13 Coated Belts
  • Foam Applicator Brushes
  • 7" Flap Discs
  • 2" Type-M Non-Woven QC Disc
  • Walter Topcut Sanding Discs
  • 7"x5/8-11 Fiber Discs
  • 8 x 107 Coated Belts
  • 37 x 60 Non-Woven Belts
  • 3" Polishing Pads
  • 3" x 4-1/4" Hook Sheets
  • 9" PSA Coated Abr Discs
  • 1" Flap Wheels
  • 1-1/4" Encap Crimp Wire Wheel
  • 3/4 x 18 Non-Woven Belts
  • Cutting Tools
  • 9/16" Nylon Abr Tube Brushes
  • 2" / 48mm Tan Packaging Tape
  • Cut & Polish Wheels
  • Wound Dressings
  • 1" Type-S Quick-Chg Discs
  • 3/8 x 21 Coated Belts
  • Type-S Quick Change Discs
  • 7"x7/8 T-28 Angled Wheels
  • 8" Discs, PSA, 8 dust holes
  • Nylon & Tampico Wheels
  • Discs, Non-Woven Hook
  • 8-1/2" x 11" Film-Back Sheets
  • Crimped Nylox Cup/Disc Brushes
  • 3/4" Type-R Quick Chg Disc
  • 3 x 132 Coated Belts
  • Non-Woven Spiral Bands
  • E-Weld Plasma
  • Sweep Strip Brushes
  • 4" x 4" Interleaf Flap Wheels
  • 5" Hook Discs, 5 dust holes
  • Counter Dusters
  • Discs, 5" Surface Conditioning
  • 2" Mtd Flared Brushes
  • 1-1/2" Type-M Quick-Chg Discs
  • 4 x 36 Coated Belts
  • 5-1/2x9 Waterproof Sheets
  • 2" Non-Woven Flap Brushes
  • Unitized Discs (T-27)
  • Backup Pad, 3x1/4 shk Hook
  • Back-up Pads
  • 1/2 x 12 Non-Woven Belts
  • 16" Diamond Wheels
  • 3/4" Type-R Non-Woven QC Disc
  • Sanding Stars
  • 1" Non-Woven Abrasive Bands
  • 8" T-1 Grinding/Bench Wheels
  • 3/16" dia Half Taper Cart. Rol
  • 1/2" Knot Wire End Brush
  • 4" Clean & Strip Wheels
  • 7" SiC Green Bench Wheels
  • 7" T-27 MTX Cotton Fiber Wheel
  • Flared Brushes
  • T-28 Angled Grinding Wheels
  • 1/2 x 42 Coated Belts
  • Hook & Loop Discs
  • 4" T-27 Flap Discs
  • Non-Woven Abrasives, Weiler
  • 4"x1/4 Fiber Discs
  • 2" Interleaf Flap Discs
  • 4-1/2" Hook Abrasive Rolls
  • 3 x 15-1/2 Coated Belts
  • 8" Discs, PSA, no dust holes
  • 7" T-29 Grinding Wheels
  • Paint Roller Covers
  • Triangle & Teardrop Sheets
  • 9"x7/8" T-27 Grinding Wheels
  • 1" (24mm) Crepe Masking Tapes
  • 9" T-29 Grinding Wheels
  • Can Scrubs Tampico
  • 10" dia Flap Brushes
  • 4" Flap Discs
  • 7" Non-Woven Hook & Loop Disc
  • 12" PSA Coated Abr Discs
  • 48" Metal Foil Tapes
  • 2" Non-Woven Hook & Loop Disc
  • 8" PSA Disc Backup Pads
  • 3/ 4" / 18mm Masking Tap
  • 6 x 48 Non-Woven Belts
  • 5" Diamond Wheels
  • 3-1/2" Crimped Wire Cup Brush
  • 2" x 1" Non-Woven Brushes
  • 6" x 7/8 Flap Discs
  • 4-1/2" Non-Woven Flap Disc
  • 5" T-27 Grinding Wheels
  • 3" Interleaf Flap Discs
  • 1-1/2" PSA Coated Abr Discs
  • Sheets, Coated Abrasive, Walte
  • 37 x 60 Non-Woven Belts
  • 2" Bristle Discs
  • 1/4" Pencil End Brush
  • 5" Flannel Buffing Wheels
  • Dusters
  • 1 x 72 Coated Belts
  • 7" T-29 Angled Flap Discs
  • Faucets, Spouts, and Pumps for
  • 10" PSA Coated Abr Discs
  • 6" Encapsulated Knot Wheels
  • 3" Finishing Discs
  • 1-1/2" Flap Wheel Cup 1/4"s
  • Hand Tube Brushes
  • 6" Paper-Back PSA Discs
  • 48" Foil Tapes
  • Diamond Hand Laps
  • Sweep Floor Brushes
  • 4" Standard Twist Knot Wheels
  • 4" T-27 Grinding Wheels
  • 6" Bridled Cup Brush
  • Type-S Non-Woven QC Discs
  • Small Type-M Quick Chg Pads
  • 3" PSA Coated Abr Discs
  • 6"x5/8-11 T-1 Cut-off Wheels
  • 15"+ Grinding Wheels
  • 2" Type-S Non-Woven QC Discs
  • Cushioned Abrasive Hand Files & Buffs
  • 1-1/2" Flap Wheel, 1/4-20 Q.C.
  • 1" Type-S Non-Woven QC Discs
  • 4" Flannel Buffing Wheels
  • 1" / 24mm Clear Packaging Tap
  • Sia - Sheets
  • VHB Foam Tape x Color
  • 1-3/16" Rectangular Tube Brush
  • 6 x 168 Coated Belts
  • 3" Type-R Cotton Chg Disc
  • Tapes
  • Portable Belts, VSM
  • Type-M Quick Change
  • 12" Nylox Disc (Cup) Brush
  • 2-1/2" Rectangular Tube Brush
  • 1" Type-S Quick-Chg Discs
  • 52 x 85 Non-Woven Belts
  • 6" T-28 Angled Grind Wheels
  • 1/4" Vinyl / Plastic Tapes
  • 6" Plater's Wire Wheels
  • Hook Back Teardrop Sheets
  • 3/16" Minature End Brushes
  • 36" Metal Foil Tapes
  • Portable Belts, Arc
  • 3/4" Type-M Quick-Chg Discs
  • 9x11 Waterproof Sheets
  • 1-1/2 x 30 Coated Belts
  • 2-1/4x9-3/4 A-MED Non-Woven Ny
  • 4" Fiber Discs
  • Weiler Crimped Wire Cup Brushe
  • Walter Blendex Unitized Wheels
  • 1/4" Rectangular Tube Brush
  • Walter Quick-Step Blendex Disc
  • 3" / 72mm Clear Packaging Tap
  • 1" Banded Nylox End Brush
  • 6" Back-up Pads
  • 1/4"" x 6"" PSA Coated Sheets
  • 4" Encap Cup Brushes
  • 6" Discs, PSA, 6 dust holes
  • Festool 7-1/4" Brilliant H&L Discs
  • Broom/Mop Handles & Brackets
  • 14" SiC Green Bench Wheels
  • 3 x 24 Coated Belts
  • 9" T-1 GFX Cotton Fiber Wheels
  • Walter 1/8" T-27 HPCombo Spin-
  • Walter 1/4" T-27 HP Spin-On Gr
  • 3-1/2" Nylox Disc (Cup) Brush
  • Type 18 Plugs
  • Sanding Discs, Plain-Backed
  • 5" Non-Woven Hook & Loop Disc
  • PSA Backed Sanding Discs
  • #4718 Vinyl Tapes
  • Wire Brushes
  • 6 x 60 Coated Belts
  • 3" .008 CS 1/4" Sh E3 Encapsul
  • 4" x 2" Flap Wheels
  • 2" Non-Woven Spiral Bands
  • 1-1/2 x 24 Coated Belts
  • 3-1/2" x 2-3/4" PSA Sheets
  • 4-1/2" Coated Abrasive Rolls
  • #5903 Outdoor Masking Tape
  • Weiler 3-1/2" Knot Wire Cup B
  • Walter Blendex Drum Belts
  • 24" Metal Foil Tapes
  • Lite-Com Pro III Series
  • Minature Mounted End Brush
  • 3" Flap Wheels, 1/4-20 QC
  • Nylox Wheels
  • 1/2 x 18 Coated Belts
  • 16" T-1 Cut-off Wheels
  • 6"x7/8" T-27 Grinding Wheels
  • Non-Woven Abrasives, Wendt
  • 3" Knot Wire Wheels
  • 6" Fiber Discs
  • 7" Finishing Discs
  • 1-1/2 x 132 Coated Belts
  • 4" Encap Crimped Wire Wheel
  • 4-1/2"x7/8" T-27 Grind Wheels
  • 3-1/4" x 5" PSA Sheets
  • #4811 Preservation SealingTape
  • 8" x 3/4" Grinding Wheels
  • Overlap Slotted Discs
  • 9" x 11" Paper Sheets
  • 1-1/2" Type-S Non-Woven QC Dis
  • Mounted Points, 1/8" shank
  • 1/8" Hand Tube Brush
  • 2-3/4" Hook Abrasive Rolls
  • 4-1/2" Hook Discs, 9 dust hole
  • 8" General Purpose Wheels
  • Tube Brushes, Nylon Abr Fila.
  • 5" Cotton Fiber T-27 Wheels
  • 5" PSA Disc Pad, no dust hole
  • Walter Circular Finishing
  • Sheets, Micromesh Cushioned Abrasive
  • Accessories
  • 7/8"" Tapered Spiral Band
  • 10" Flannel Cloth Wheels
  • 7" A/O Bench Grinding Wheels
  • Block Brushes
  • Discs, 7" Surface Conditioning
  • 4-1/2"x7/8 Fiber Discs
  • 4 ft x XX Safety Walk Mat
  • Sanding Discs, Plain-Backed
  • Coated Abrasives, Sia
  • 6 x 300 Coated Belts
  • Pipe Polishing Systems
  • 12" & Larger Finishing Wheels
  • 6" .040 SiC - 80 5/8-11 Thread
  • 1/2" Spiral Bands
  • Bio-Circle 400 Accessories
  • Foil Tapes (By Code)
  • Belts, Coated Abrasive
  • 1/4" dia Half Taper Cart. Roll
  • 6-1/2" Bulk Adh Transfer Tapes
  • 5" Diamond Grinding Discs
  • 4" x 1/2" Sait-Strip Mounted W
  • Walter 5/8"-11 Arbor Flap Dis
  • 8" Diamond Wheels
  • Portable Belts, Misc Sizes
  • 12" Soft/Untreated Cloth Whee
  • 52 x 75 Coated Belts
  • 7"" x 7/8 Flap Discs
  • 6 x 79 Coated Belts
  • 4" Finishing Flap Wheels
  • Straight Cartridge Rolls
  • Minature End Brushes
  • 1" Rectangular Tube Brush
  • 12" Light Finishing Whels
  • #3311 Scotch Aluminum Tape
  • 37 x 48 Non-Woven Belts
  • 6" Vitrified Bench Wheels
  • 6" T-27 Cut-off Wheels
  • 1 x 60 Coated Belts
  • Nylon Wheels
  • 2 x 72 Non-Woven Belts
  • 100 mm Metal Foil Tapes
  • 2-1/2 x 14 Coated Belts
  • 4-1/2" Diamond Wheels
  • 3" Type-M Quick-Chg Discs
  • See: NO-2B51634
  • Hook Non-Woven Discs
  • 1/4 x 20-1/2 Coated Belts
  • 4" x 4" Interleaf Flap Wheels
  • Interleaf Flap Discs
  • 4-1/2"x7/8" T-29 Grind Wheels
  • Cylinder Points, Rubber
  • #301+ Performance Yellow Tape
  • 2-3/4" Nylon Abr Tube Brushes
  • 2-3/4" Power Tube Brush
  • 6" x 1" Flap Wheels
  • 9" T-27 Grinding Wheels
  • CP-107 Industrial Crepe Tape
  • 1-1/2" Tube Center Wire Wheels
  • 4" Unitized Wheels
  • Sanding Products
  • 6 x 89 Coated Belts
  • 4 x 106 Coated Belts
  • Hand Pad / Sheet Holders
  • 6" Hook Discs (no holes)
  • 10" dia & larger Flap Wheels
  • Rubber (Cratex) Abrasives
  • 8" Hook Multi-hole/Mesh Discs
  • A24R Long Life Grinding Wheels
  • 15" Crimped Wire Wheels
  • Hand Brush
  • 4" Type-M Non-Woven QC Disc
  • Festool 5" H&L Polishing Discs
  • Linear Finishing - Belts
  • Straight Cartridge Rolls
  • Non-Woven Stars
  • 9" x 11" Film-Back Sheets
  • 4-1/2" PSA Abrasive Rolls
  • 4" Nylox Wheels
  • 36 x 60 Coated Belts
  • Banded Crimped End Brushes
  • Portable Belts
  • Diamond Abrasive Sheets
  • Cross Pads
  • Non-Woven Abrasive Wheels
  • 1-1/2 x 60 Coated Belts
  • 9" x 11" Screen Sanding Sheets
  • 6" Hook Disc Pad, 9 dust holes
  • 6" Encap Cup Brushes
  • Overlap Slotted Discs
  • 8" Hook Pad, Multi-hole / Mes
  • 1100-**-0103 Components
  • 3" NW Disc Holders
  • Squeeges
  • 9" T-27 Cut-off Wheels
  • Outdoor Products
  • Weiler Knot Wire Cup Brushes
  • 2" Non-Woven Hook & Loop Disc
  • Metal Adapters
  • 7"x5/8-11 Fiber Discs
  • 2" Felt Polishing Flap Disc
  • 3/4" ATG Adh Transfer Tapes
  • 2 x 34 Non-Woven Belts
  • 2" Flap Wheels, 1/4-20 Q.C.
  • 1-3/4" Crimped Wire Cup Brush
  • Backup Pad, 5x5/8-11 Med Hook
  • 3-2/3" x 9" Cloth Sheets
  • Wire Wheels
  • 1-1/4" Encap Crimp Wire Wheel
  • 4" Encapsulated Crimped Wheels
  • Walter 4-1/2" Cut-Off Wheels
  • 3" Hook Multi-hole/Mesh Discs
  • 1" Type-R Non-Woven QC Disc
  • Weiler Crimped Wire Cup Brushe
  • 4-1/2"x5/8-11 T-27 Grind Wheel
  • 3 x 21 Coated Belts
  • 1/4 x 18 Non-Woven Belts
  • 2-1/2" Knot Wire Wheels
  • 3" Mtd Flared Brushes
  • Holders
  • 4"x5/8 Fiber Discs
  • 8" Felt Polishing Flap Wheels
  • 8" Concrete Cut-off Wheels
  • 4" Interleaf Flap Wheels
  • 3/4" dia Cartridge Rolls
  • 1-1/2" & Smaller
  • Maintenance Paint
  • 12" Encapsulated Crimped Wheel
  • 3M Disc Sander Accessories
  • 4-1/2" x 7/8 Flap Discs
  • 1300-**-0103 Components
  • 3/4 x 20-1/2 Coated Belts
  • 7" Non-Woven Hook & Loop Disc
  • 2" Sanding Stars
  • 6" x 1-1/2" Flap Wheels
  • 3/4" Type-S Non-Woven QC Discs
  • 1-1/2" Flap Wheel, 1/4" shank
  • 2 x 37 Coated Belts
  • Type 16 Cones
  • Finesse-It Buffs & Polishes
  • 12.75" Bulk Adh Transfer Tapes
  • 2 x 60 Non-Woven Belts
  • 8" PSA Coated Abr Discs
  • VHB Foam Tape x Width
  • 1-3/16" Power Tube Brushes
  • #2158 (1 pt) Gray Part B/A Sco
  • 5" x 7/8 Fiber Discs
  • 1/8" Bulk Adh Transfer Tapes
  • 7"x7/8" T-29 Grinding Wheels
  • 4-1/2" 80 grit Fiber Discs
  • Flanges, for Nylox wheels
  • 7/8" Tube Brushes
  • 12" Bench Mount Grinding Wheel
  • 1/2 x 24 Coated Belts
  • 5" T-29 Angled Flap Discs
  • 4-1/2"x5/8-11 T-1 Cut-off Whl
  • 1/2 x 44 Non-Woven Belts
  • 8-1/2" x 11" Plain-Back Sheets
  • 2-3/4" Abrasive Rolls
  • 3" Felt T-27 Mini Flap Disc
  • 5" T-1 Cut-off Wheels
  • 5" Cable Twist Knot Wheels
  • 1/8" dia Straight Cart. Rolls
  • Cartridge Rolls
  • #2050 Masking Tape
  • 6" Euro-9 Hook Discs, Blue
  • 1-3/4" Power Tube Brushes
  • 1-1/2" Unitized Wheels
  • 1-1/2" Interleaf Flap Wheel
  • 6" Felt Wheels
  • 5" Foam Polishing Discs
  • 5" Quick-Change Fiber Discs
  • 9"x5/8-11 T-29 Grinding Wheels
  • Fiber Discs, Arc
  • W Shape Mounted Points
  • Minature Mounted Cup Brushes
  • 6" Nylon Wheels
  • 1-1/4" Minature Stem-Mounted
  • VersaFlo M-400 Series Parts
  • 6" x 7/8 T-27 Cut-off Wheels
  • 7" x 7/8 Flap Discs
  • 1-1/2" Type-R Non-Woven QC Dis
  • 9" & larger Fiber Discs
  • 1/8 x 20-1/2 Coated Belts
  • Abrasive Rolls, Hook/Loop Back
  • 6" Hook Discs, 8 dust holes
  • 2-1/2 x 72 Coated Belts
  • 6" Non-Woven Flap Discs
  • 1/8" dia Cartridge Rolls
  • 1/8" Crimped Mtd Wheels
  • 2 117 m Metal Foil Tapes
  • 18"" x 18"" Plain-Back Sheets
  • 14" PSA Coated Abr Discs
  • 3-1/4" x 5" PSA Sheets
  • Shape "G", 1/4" Shank Burs
  • Sheets, Coated Abrasive, Sia
  • 5" Hook Disc Pad, no holes
  • VersaFlo Respirator Cartridges
  • Stationary Belts, Misc Sizes
  • 3" x 1/2 Snagging Wheels
  • 2" Finishing Flap Wheels
  • 37 x 75 Coated Belts
  • 5" Hook Multi-hole/Mesh Discs
  • Belts, Non-Woven
  • 6" .040 SiC - 80 2" A.H., M-Br
  • 4-1/2" Hook Coated Abr Discs
  • Plastic Adapters & Bushings
  • 4-1/2" T-1 Cotton Fiber Wheels
  • 4 x 132 Coated Belts
  • 4" Type-R Non-Woven QC Disc
  • 6" Single Row Knot Cup Brush
  • 6" Discs, PSA, 6 dust holes
  • 8" Standard Twist Knot Wheels
  • Counter Dusters
  • 1-1/2" PSA Coated Abr Discs
  • Small Type-S Quick Chg Pads
  • 5-3/8 x 15-1/2 Coated Belts
  • 1" Double-Coated Paper Tape
  • Weiler 4" Crimped Wire Cup Br
  • #898 Filament Tapes
  • 7" T-27 Grinding Wheels
  • 9"&larger x 5/8-11 Fiber Discs
  • 3/16" dia Straight Cart. Rolls
  • 4-1/2"x7/8" T-27 Cut-off Wheel
  • Bonded Abrasives, Sia
  • Hook Back Teardrop Sheets
  • 4" wide Utility Tapes
  • 7" Fiber Disc Back-up Pads
  • 5" Fiber Discs
  • Walter Concrete Grinding Wheel
  • 2" Flap Wheels
  • 2-3/4" x 17-1/2" Hook Sheets
  • 5" 100 grit Fiber Discs
  • 4 x 90 Coated Belts
  • 7" T-1 Cotton Fiber Wheels
  • 1/2"
  • 2-1/2 x 72 Coated Belts
  • 1-1/2" Type-R Non-Woven QC Dis
  • Flap Discs, Non-Woven
  • #764 Vinyl Tapes
  • 3" Cable Twist Knot Wheels
  • 6" Clean & Strip Discs
  • 1/4" dia Straight Cart. Rolls
  • 15" Hook Coated Abr Discs
  • 4-1/2" Unitized Wheels
  • 3-1/4" x 5" Hook Sheets
  • 7-1/4" H&L Polishing Discs
  • 1-1/2" Type-R Cotton Disc
  • 5" T-27 Flap Discs
  • Detail Sponges, Single-Sided
  • 3" Felt Polishing Flap Wheels
  • 10" PSA Coated Abr Discs
  • 7/8" Encapsulated Tube Brush
  • 2-1/2 x 60 Non-Woven Belts
  • 3" PSA Coated Abr Discs
  • 1-3/8" Tube Center Wire Wheels
  • 4 x 64 Coated Belts
  • Scrub Brushes
  • 4-1/2" T-1 Cotton Bond Disc
  • 6" Hook Discs (no holes)
  • Nylon Wheel Adapters
  • Interleaf Flap Discs
  • 1-1/8 x 21 Coated Belts
  • 2 x 48 Coated Belts
  • Sheets, Coated Abrasive, Carbo
  • 8" x 1" Flap Wheels
  • 1" Vinyl / Plastic Tapes
  • 5" T-27 Grinding Wheels
  • 1" Interleaf Flap Wheels
  • 3/4" Flap Wheels, 1/8" Shank
  • 6" Hook Disc Pad, 8 dust holes
  • 3/4" Rectangular Tube Brush
  • 7" T-1 Cotton Bond Disc
  • Trial Kits
  • 1"" dia Cartridge Rolls
  • 2-3/4" x 8" PSA Sheets
  • 2" Minature Wheels
  • 20" T-1 Cut-off Wheels
  • 44 x 75 Coated Belts
  • 5/16" dia Straight Cart. Rolls
  • 2" Metal Foil Tapes
  • Back-up Pads
  • Specialty Non-Woven Abrasives
  • Interface & Saver Pads
  • Flap Wheels
  • 9"x7/8" T-27 Grinding Wheels
  • 3/8" dia Full-Taper Cart. Roll
  • 8 x 107 Coated Belts
  • 1/8" Sh Miniature Wire Wheel
  • 2" Non-Woven Flap Discs
  • 14" Nylox Wheels
  • 6" PSA Discs, Gold
  • 4 x 24 Coated Belts
  • 4-1/2" Flap Brushes/Wheels
  • 8" Cable Twist Knot Wheels
  • 1" Coated Abrasive Rolls
  • 7"x7/8" T-1 Cut-off Wheels
  • 4 x 36 Coated Belts
  • 10" x 1/8" Cut-off Wheels
  • 44 x 75 Coated Belts
  • 4" x 2" Non-Woven Wheels
  • 1-1/2" Type-M Quick-Chg Discs
  • 1" T-1 Cut-off Wheels
  • Walter Blending
  • T-29 Grinding Wheels
  • 2 x 48 Non-Woven Belts
  • Buffing Accessories
  • Clean & Finish Wheels
  • 1-1/2" (36mm) Crepe Tapes
  • 1/2 x 18 Non-Woven Belts
  • 1-1/4" Minature Wheels
  • Hook Triangle Sheets
  • 3" Soft/Untreated Cloth Wheel
  • 80 x 144 Coated Belts
  • 2" / 48mm Masking Tapes
  • 2-1/2" Nylon Wheels
  • 2" Encapsulated Crimped Wheels
  • 8" Non-Woven Spindle Mount Di
  • 37 x 60 Coated Belts
  • 1" PSA Discs (and smaller)
  • Clear Packaging Tapes, x Code
  • 3" NW Disc Holders
  • Backup Pads, Type-S (metal)
  • Accessories, Adapters, Arbors
  • 4-1/2" Finishing Discs
  • Type 16 Cones
  • 1" Flap Wheels, 1/4" shank
  • 12" Deburring Wheels
  • 1/2 x 18 Non-Woven Belts
  • 7" Hook Coated Abr Discs
  • 6" / 144mm Masking Tape
  • Double Row Knot Cup Brushes
  • Zip Wheel Cutter Accessories
  • Flap Rolls, Non-Woven
  • 1 x 12 Coated Belts
  • 1/4" Vitrified Mounted Points
  • #8981 Bi-Directional Filament
  • Folded Flap Wheels
  • 3/4 x 18 Coated Belts
  • 3" Mini Flap Discs
  • #477 Vinyl Tapes
  • 2-3/4" x 16-1/2" Hook Sheets
  • 8" Hook Discs, 16 dust holes
  • Sanding Screen Abrasive Sheets
  • 8" Finishing Wheels
  • Miscellaneous Other Tapes
  • 4" Nylox Disc (Cup) Brush
  • 3/4" Flap Wheels, 1/4" Shank
  • Small Belts, Weiler
  • 16" Wheels
  • 4 x 90 Coated Belts
  • Mops
  • 6" Hard / Treated Cloth Wheel
  • 3 x 60 Coated Belts
  • 5" Hook Discs, Blue
  • 6" Nylox Disc (Cup) Brush
  • 5/8" Flap Wheels, 1/8" Shank
  • Trial Kits
  • 1-1/8" Power Tube Brushes
  • 12" & Larger Hook Discs
  • 3" Type-S Non-Woven QC Discs
  • Mounted Points
  • 8" Diamond Wheels
  • 8 x 132 Coated Belts
  • 2-1/2 x 48 Coated Belts
  • Flange Sets and Adaptors
  • 1-1/2" T-1 Cut-off Wheels
  • 1/4" dia Straight Cart. Rolls
  • 6" Flaring Cup Wheels
  • Discs, Coated Abrasive
  • Shape "C", 1/8" Shank Burs
  • 2 x 60 Coated Belts
  • 1" Type-R Non-Woven QC Disc
  • 5" x 7/8 Flap Discs
  • 2 x 34 Non-Woven Belts
  • 4" T-1 Cotton Fiber Wheels
  • 4-1/2" Metal Foil Tapes
  • 5" Paper-Back Hook Discs
  • 7" T-1 Cut-off Wheels
  • Portable/Gas Saw Wheels
  • 20" Hook Coated Abr Discs
  • 2" Type-R Quick-Chg Discs
  • 3/4" Nylon Abr Tube Brushes
  • 1-1/8" Knot Wire End Brush
  • 5" Type-S Non-Woven QC Discs
  • Burn Care
  • 6" Encapsulated Knot Wheels
  • Mounted Points, Cotton Fiber
  • 5" Crimped Wire Wheels
  • 2" Type-R Non-Woven QC Disc
  • 1-1/2" PSA Coated Abr Discs
  • 6 x 60 Coated Belts
  • 3-1/2 x 15-1/2 Coated Belts
  • Beige Foam Tapes
  • CP-66 Industrial Crepe Tape
  • 4-1/2x5-1/2 Waterproof Sheets
  • 1-1/2" Flap Wheel Cup, 1/4"
  • Spiral Band Mandrels
  • 3" Type-R Non-Woven QC Disc
  • WEI-03804
  • 4 x 36 Coated Belts
  • 1-1/4" Encapsulated Crimped
  • 6" Foam Polishing Discs
  • Wheels, Rubber
  • 10" Bulk Adh Transfer Tapes
  • C shape Abrasive Caps
  • #2090 Blue Masking Tape
  • 1-1/4" Power Tube Brushes
  • 81 mm x 133 mm PSA Sheets
  • 4" PSA Coated Abr Discs
  • 4-1/2" 50 grit Fiber Discs
  • 3/8" x 2" Plain-Back Sheets
  • 52 x 75 Non-Woven Belts
  • 6 x 132 Non-Woven Belts
  • 12" Buff & Blend Wheels
  • 5/16" Minature End Brushes
  • 3"d Flap Wheel Brush
  • 65 mm Metal Foil Tapes
  • Interleaf Flap Discs
  • 8" Non-Woven Flap Brushes
  • Antiseptics, Creams, Ointments
  • 2" Crimp Wire Cup Brush
  • Sanding Pads & Sponges
  • 6" NW Disc Holders
  • 3/16" dia Full-Taper Cart. Rol
  • 2 x 132 Coated Belts
  • WEI-03804
  • Shape "C", 1/4" Shank Burs
  • 3" Flap Wheels, 1/4-20 QC
  • 7" Non-Woven Hook & Loop Disc
  • 2" T-1 Cut-off Wheels
  • 6"/144mm Tan Packaging Tape
  • 3-1/2" Double-Row Knot Cup Br
  • 3" Crimped Wire Wheels
  • 9" T-29 Grinding Wheels
  • Non-Woven Belts
  • 7" TN 5/8-11 Non-Woven
  • 5" x 5/8-11 Fiber Discs
  • 7" 100 grit Fiber Discs
  • #600 Premium Packaging Tape
  • PSA Backed Sanding Discs
  • 5"x5/8-11 T-27 Grinding Wheels
  • 5/8" Foil Tapes
  • 10" Light Finishing Wheels
  • VersaFlo Headgear, Hard
  • Cutting Products
  • 4-1/2" Interleaf Flap Discs
  • 1-1/2" NW Disc Holders
  • 6" x 1" Non-Woven Flap Brushes
  • Clear VHB Foam Tapes
  • 37 x 75 Coated Belts
  • 5" x 7/8 T-1 Cut-off Wheels
  • 5" 36 grit Fiber Discs
  • 5" Hook Discs (no holes)
  • Detail Brushes
  • 6"x5/8-11 T-27 Cut-off Wheels
  • 1-1/2" & Smaller
  • Flap Discs, Sait
  • 14" .040 SiC - 80 2" A.H., M-B
  • Lite-Com Pro II Series
  • 6-1/2" Flap Discs
  • 5" Nylox Disc (Cup) Brush
  • 1/2" dia Half Taper Cart. Roll
  • 6" Interleaf Flap Wheels
  • 3" Interleaf Flap Discs
  • 3-1/2" PSA Coated Abr Discs
  • 4-1/2" x 11" Plain Sheets
  • 3" Flap Brushes
  • 2 x 72 Cushioned Abrasive Belts
  • 2-3/8" Finishing Flap Wheels
  • 30" Bulk Adh Transfer Tapes
  • 96 x 144 Coated Belts
  • 1"
  • Welding Mask
  • 6" T-27 Flap Discs
  • 1/2 x 13 Coated Belts
  • 4" Clean & Strip Discs
  • Brooms / Floor Sweeps
  • 9" T-1 Cut-off Wheels
  • 3/8" wide VHB Foam Tapes
  • Discs, 8" Surface Conditionin
  • Flap Wheels
  • 3/4" dia Full-Taper Cart. Roll
  • Small Type-R Quick Chg Pads
  • 9" x 11" Plain-Back Sheets
  • 3 x 25+ Diamond Abr. Belts
  • #375 Packaging Tape
  • Hook & Loop Discs
  • 1 x 24 Coated Belts
  • 6 x 79 Coated Belts
  • #3325 Copper Foil Tape
  • 2-3/8" Finishing Flap Wheels
  • 3/4" Flap Wheels
  • 4" Cable Twist Knot Wheels
  • 4-1/2" T-27 GFX Cotton Wheels
  • 1 x 11 Non-Woven Belts
  • 7" Stringer Bead Knot Wheels
  • 1/4" ATG Adh Transfer Tapes
  • 4-1/2" Hook Pad, 9 dust holes
  • 2" PSA Coated Abr Discs
  • Hand Pads & Sponges
  • 3 x 10-11/16 Coated Belts
  • 9" x 11" Cloth Sheets
  • ARC-640150242
  • 5/8" wide VHB Foam Tapes
  • 4-1/2" T-29 Flap Discs
  • Coated Abrasives, Norton
  • Accessories & Misc
  • #8934 Filament Tape
  • 5" T-27 Cut-off Wheels
  • 1-1/2" Non-Woven Flap Brush
  • 3-1/4" X 5-1/4" PSA Sheets
  • 4" T-27 Cotton Fiber Wheels
  • 1-1/2" Felt Flap Wheels
  • 14" Buff & Polich Wheels
  • 6" Flap Discs
  • 2" Type-R Non-Woven QC Disc
  • 36 x 75 Non-Woven Belts
  • Bench Mount Grinding Wheels
  • 7" 120 grit Fiber Discs
  • 2" Flap Wheels
  • 2 x 37 Coated Belts
  • 7/16" Rectangular Tube Brush
  • #425 Aluminum Foil Tape
  • 3" Crimped Mounted Wire Wheels
  • W Shape Mounted Points
  • 14" T-1 Cut-off Wheels
  • 1-3/16" Flap Wheels, 1/8" sh
  • 8" Discs, PSA, no dust holes
  • 4-1/2" Felt Flap Discs
  • Stationary Belts, Non-Woven
  • Blocks (Floor Rubs & Wedges)
  • White Foam Tapes
  • 6" Bench Mount Grinding Wheels
  • Non-Woven Abrasive Wheels
  • 8" PSA Coated Abr Discs
  • Pathogen/Bloodborne Protection
  • 2-3/4" x 16-1/2" Plain Sheets
  • 3" Type-S Quick Chg Disc Pads
  • Coated Abrasive Flap Wheels
  • 4 x 84 Non-Woven Belts
  • 12" Metal Finishing Wheels
  • Wheel & Center Hub Bushings
  • 8-1/2x11 Waterproof Sheets
  • 6" x 1" Flap Wheels
  • Stationary Belts, Arc
  • 4-1/2" Fiber Discs
  • 2 x 60 Coated Belts
  • 6" Discs, PSA, 6 dust holes
  • 3-2/3" x 7" Hook Sheets
  • 3" Non-Woven Rolls
  • #3340 Aluminum Foil Tape
  • 2-3/4 x 15-1/2 Non-Woven Belts
  • Buckets & Mops
  • 8" Clean & Strip Wheels
  • 4-1/2"x5/8-11 T-27 Cut-off Whl
  • 1 x 12 Coated Belts
  • 6 x 78 Coated Belts
  • 5/8" wide Foam Tapes
  • 1/4 x 13 Coated Belts
  • 5/16" Rectangular Tube Brush
  • 3/8" dia Full-Taper Cart. Roll
  • 3" Trim-Kut Discs
  • 1 x 72 Non-Woven Belts
  • 3/4 x 18 Coated Belts
  • 2" Felt Wheels
  • 7" Hook Discs, No Dust Hole
  • Interleaf Flap Discs
  • 5" PSA Coated Abr Discs
  • 4 x 168 Non-Woven Belts
  • Flap Bands
  • 2-1/2 x 132 Coated Belts
  • 1/4 x 18 Coated Belts
  • 3/4" Type-R Quick-Chg Discs
  • Walter 2" Cut-off Wheels
  • 7"x5/8-11 T-27 Cut-off Wheels
  • 3 x 132 Coated Belts
  • Tube Brushes
  • Wheel & Center Hub Bushings
  • 2" Hook Disc Backup Pads
  • Slotted Expander Wheels
  • 3/4 x 20-1/2 Coated Belts
  • 4" Double-Row Knot Cup Brush
  • 6" Hook Discs, 8 dust holes
  • 2-3/4" x 3-1/2" PSA Sheets
  • 7"" Flap Discs
  • 2" Felt Wheels
  • 2-1/2 x 48 Coated Belts
  • 8" Non-Woven Hook & Loop Disc
  • 4-1/2" Surface Condition Discs
  • 1/2" Crimped Wire End Brush
  • 4" T-27 MTX Cotton Wheels
  • 4-5/8" Metal Foil Tapes
  • 14" Low HP Chop Saw Wheels
  • Hook Triangle Sheets
  • 1" Type-M Non-Woven QC Disc
  • 1-1/2" Hook Non-Woven Discs
  • Sheets, PSA-Backed
  • 5/8" dia Half Taper Cart. Roll
  • 6" Hook Discs, 6 dust holes
  • PSA Backed Sanding Discs
  • Flaring Cup Wheels
  • 1-1/8" Power Tube Brush
  • 3-1/2" Nylox Disc (Cup) Brush
  • 7" Fiber Discs
  • 24" T-1 Cut-off Wheels
  • 4" Finishing Flap Wheels
  • 11" Hook Discs (no holes)
  • 4" Flap Discs
  • Miscellaneous File Belts
  • 2-1/2" Mini Flap Discs
  • 6"x5/8-11 T-27 Grinding Wheels
  • 1" Rectangular Tube Brush
  • 20" T-1 Cut-off Wheel
  • T-29 Grinding Wheels
  • W Shape Non-Woven Mounted Pt
  • 1" Tube Center Wire Wheels
  • Double-Slant Profile Sponges
  • Minature Mounted Cup Brushes
  • 5" Discs, PSA, 8 dust holes
  • Disc Accessories
  • 6 x 125 Coated Belts
  • 6" Finishing Discs
  • Belts, Coated Abrasive
  • Toothbrush Scratch Brushes
  • 5" Non-Woven Flap Discs
  • 3-1/2" Hook Coated Abr Discs
  • 4-1/2" Metric Hub Wheels
  • Sia - Sheets
  • 1-1/2" (36mm) Foil Tapes
  • 10" Bench Mount Grinding Wheel
  • 1-1/2"d Flap Wheel Brush
  • 9" & larger Fiber Discs
  • 14" SiC Green Bench Wheels
  • 5/8"" dia Cartridge Rolls
  • 7" Flap Discs
  • B Shape Mounted Points
  • Type-R Non-Woven QC Discs
  • 1" Flap Wheel, 1/4-20 shank
  • Belts, Non-Woven
  • 1" Type-M Non-Woven QC Disc
  • 6" Hook Discs, 6 dust holes
  • 10" Unitized Wheels
  • 1/4" sh A-Shape Mtd Points
  • 6" Light Finishing Whels
  • 1-1/2" Type-S Non-Woven QC Dis
  • Interleaf Flap Discs
  • 11" Hook Discs (no holes)
  • 2" T-1 Grinding Wheels
  • 3/4" Flap Wheels
  • Respirators eligible for school discounts.
  • 7" Hook Disc Pad, 5/8-11
  • 1-1/2" Hook/Loop Discs
  • Flap Wheel Brushes
  • 4" Finishing Flap Wheels
  • 5" Flap Discs
  • 5" T-27 Cut-off Wheels
  • 6 x 108 Coated Belts
  • 2" NW Disc Holders
  • 16" Metal Foil Tapes
  • 3" T-1 Grinding Wheel
  • 3" Type-M Quick-Chg Discs
  • 7 x 10-11/16 Coated Belts
  • #2214 (2 fl oz) Cream Non-Meta
  • 1" PSA Discs (and smaller)
  • T-27 D/C Grinding Wheels
  • 2-1/2 x 48 Coated Belts
  • 3/16" Crimped Mtd Wheels
  • 1/2" Power Tube Brushes
  • 5/8" Spiral Bands
  • 1" Hand Tube Brush
  • 5" PSA Coated Abr Discs
  • 5" Flap Discs
  • 1-1/2" PSA Coated Abr Discs
  • Detail Sponges, Single-Sided
  • Sanding Screen Abrasive Sheets
  • Paint Brushes
  • 11" Hook Non-Woven Discs
  • 4-1/2" T-28 Angled Grind Wheel
  • 3-1/4" .012 CS 1/4" Sh Mtd Kno
  • 4-1/2" T-1 Cotton Cut-Off Whl
  • 1-1/2"/36mm Tan Packaging Tape
  • Flap Brushes
  • Shape "G", 1/8" Shank Burs
  • 4" Type-S Quick-Chg Discs
  • Walter T-27 ZIP Cut-Off Wheels
  • 1-1/8" Rectangular Tube Brush
  • Straight Cartridge Rolls
  • Half-Taper Cartridge Rolls
  • 3" Cut & Polish Wheels
  • 1" Minature Wheels
  • 1-1/4 x 60 Coated Belts
  • 2-3/4" Encap Cup Brushes
  • FLEXCUT Grinding Wheels
  • Diamond/SuperAbr Files
  • 6-18/25" Metal Foil Tapes
  • 7"x5/8-11 Fiber Discs
  • 1/16" dia Full-Taper Cart. Rol
  • 9"x7/8" T-1 Cut-off Wheels
  • 6" Non-Woven Rolls
  • 4" .040 SiC 80 Round Filament,
  • 4" Type-R Non-Woven QC Disc
  • Lubrication
  • 4-1/2"x7/8" T-1 Cut-off Wheels
  • 1-1/8" Rectangular Tube Brush
  • 3 x 21 Coated Belts
  • 12" Sisal Fabric Wheels
  • 2-1/2" Encapsulated Crimped
  • Linear Finishing Tools
  • 4" Spiral Bands
  • 1-1/2" Type-R Non-Woven QC Dis
  • Type-S Quick Change Discs
  • 3/4" wide VHB Foam Tapes
  • 6 x 80 Coated Belts
  • 3 x 48 Coated Belts
  • 7" Hook Coated Abr Discs
  • Non-Woven Abrasive Wheels
  • 12" T-1 Stationary Wheels
  • NO-662610-59352
  • 4-1/2"x5/8-11 Fiber Discs
  • 5/8" Rectangular Tube Brush
  • Portable Belts, Misc Sizes
  • 7"x7/8 Fiber Discs
  • 3" Crimped Wire Bevel Brushes
  • 10" Nylox Wheels
  • 4-1/2" 60 grit Fiber Discs
  • 8" General Purpose Wheels
  • 5" Finishing Discs
  • 1" Type-M Non-Woven QC Disc
  • Standard Sponges
  • 4-3/4" x 7-7/8" Hook Sheets
  • 3" Type-R Quick-Chg Discs
  • Knot Wire Wheels
  • 5" T-28 Angled Grind Wheels
  • 3" Minature Mounted End Br
  • 6" Non-Woven Rolls
  • 9" Metal Foil Tapes
  • 4" Plater's Wire Wheels
  • 6 x 108 Coated Belts
  • 3/4" Power Tube Brushes
  • Coated Abrasives, Arc
  • Accessories for Coated Abr
  • 2" General Purpose Wheels
  • 2" Type-M Quick-Chg Discs
  • 10" + larger Hook Non-Woven Di
  • 8" Encap Crimped Wire Wheel
  • 4 x 60 Non-Woven Belts
  • 1 x 32 Non-Woven Belts
  • 12.7 mm Metal Foil Tapes
  • 2" ATG Adh Transfer Tapes
  • Walter Chopcut Cut-Off Wheels
  • 9"x5/8-11 T-27 Cut-off Wheels
  • Portable Belts, Misc Sizes
  • Interleaf Flap Wheels
  • A shape Abrasive Caps
  • 5" Film-Back PSA Discs
  • 7" Hook Disc Backup Pads
  • Felt Mounted Points
  • 5/16" dia Cartridge Rolls
  • 5" Non-Woven Hook & Loop Disc
  • 12" & wider Foam Tapes
  • 3" Type-R Non-Woven QC Disc
  • Buff & Polishing Bars
  • Discs, 10" Surface Conditioni
  • 3" Flap Brushes
  • Belts, Sia Abrasives
  • 18" x 18" Plain-Back Sheets
  • 3" Type-M Non-Woven QC Disc
  • 6" PSA Coated Abr Discs
  • 6" Discs, PSA, no dust holes,
  • 4-1/2"x7/8" T-1 Cut-off Wheels
  • 4-1/2" Non-Woven Flap Discs
  • 1" Flap Wheel, 1/4-20 shank
  • 1/2 x 24 Non-Woven Belts
  • Mandrels & Arbors
  • 5" x 7/8 T-1 Cut-off Wheels
  • 4" Type-R Quick Chg Disc Pads
  • 12" Non-Woven Rolls
  • 6" Nylox Disc (Cup) Brush
  • 3" Hook Multi-hole/Mesh Discs
  • Interleaf Flap Discs
  • 6-7/8" Stringer Bead Knot Whls
  • 3/8" dia Half Taper Cart. Roll
  • #3903 Vinyl Tapes
  • 1/2" 1/4" Stem Nylox
  • 5" 80 grit Fiber Discs
  • 4 x 61 Coated Belts
  • 4-4/5" Metal Foil Tapes
  • 2" Type-R Quick-Chg Discs
  • 3" x 4" Hook Sheets
  • 1/4" sh Mounted Points
  • 3" Flap Wheels
  • 6" Deburring Wheels
  • 4" Type-R Quick-Chg Discs
  • 8" Hook Coated Abr Discs
  • 1/8" dia. Hand Tube Brush
  • 3" .035 SiC - 180 1/4" Stem, M
  • 3" Type-S Quick-Chg Discs
  • 4" T-29 Flap Discs
  • 4" x 2" Flap Wheels
  • Spiral Band Mandrels
  • 3-1/2" Finishing Discs
  • 2" Type-M Non-Woven QC Disc
  • 7" Clean & Strip Discs
  • 1 x 30 Coated Belts
  • 1-3/4" dia. Flap Bands
  • 25 x 75 Coated Belts
  • 1-1/2" Rectangular Tube Brush
  • 8" Hook Discs, 16 dust holes
  • 4" Discs, Cotton Fiber
  • Interleaf Flap Discs
  • 2-1/4" Power Tube Brush
  • Flap Discs, Non-Woven
  • 8" Flap Wheels
  • 3 x 7-1/2 Non-Woven Belts
  • Linear Interleaf Wheels
  • 2" Finishing Flap Wheels
  • 3M P100 Disposable Respirators
  • Dusters
  • Sheets, Coated Abrasive, Arc
  • B Shape Non-Woven Mounted Pt
  • 4 x 168 Non-Woven Belts
  • 3" Overlap Slotted Discs
  • 2 x 42 Coated Belts
  • 9" Diamond Cut-off Wheels
  • #311 Box Sealing Tape
  • Circular Flared End Brush
  • Bushing, Nested 1" to 3/4", 5/
  • 7" Hook Coated Abr Discs
  • 7" T-29 Angled Flap Discs
  • Weiler Knot Wire Cup Brushes -
  • 4" Non-Woven Spindle Mount Di
  • Wire Products, Sait
  • 9" x 11" Paper Sheets
  • Mounted Points
  • 12" x 12" Diamond Sheets
  • 12" Bulk Adh Transfer Tapes
  • 6 x 60 Coated Belts
  • 1 x 24 Non-Woven Belts
  • 4-1/2" Non-Woven Flap Disc
  • 1-1/2" Type-R Non-Woven QC Dis
  • 3 x 118 Non-Woven Belts
  • Black Foam Tapes
  • 8 x 60 Coated Belts
  • 2" (48mm) Foil Tapes
  • 1/4" wide Single Coated Foam
  • Sait-Strip Drive Arbor
  • 7"x7/8 Fiber Discs
  • 2" Type-M Non-Woven QC Disc
  • File Board Abrasive Sheets
  • 6" Disc Pad, 5/8-11
  • Rolls, Coated Abrasives
  • 3" Type-R Diamond Disc
  • 5" 50 grit Fiber Discs
  • 2-3/4" x 8" PSA Sheets
  • 2" Unitized Wheels
  • 2" Coated Abrasive Rolls
  • 1 x 44 Coated Belts
  • 1/2" dia Straight Cart. Rolls
  • 6" Discs, PSA, no dust holes
  • 4" Flap Discs
  • 1 x 60 Non-Woven Belts
  • 2-1/2" Mounted Flare Cup Brush
  • 4-1/2" Non-Woven Hook Discs
  • T-LOC Pipe Polishing Belts
  • 14-5/8" Metal Foil Tapes
  • Discs, 4-1/2" Surface Conditio
  • Walter ENDURO-FLEX Flap Discs
  • W-Shape Mtd Points, 1/4"
  • 1" Flap Wheels, 1/4" shank
  • In-Line Sander Accessories
  • 3" Encap Crimped Wire Wheel
  • 2 x 132 Non-Woven Belts
  • Walter ALLSTEEL XX Grinding Wh
  • Walter Topcut Sanding Discs
  • 8" Hook Discs (no holes)
  • 12" Clean & Strip Wheels
  • 4 x 60 Non-Woven Belts
  • 12" Grinding/Bench Wheels
  • Crimped Wire Wheels
  • 4-1/2"x5/8-11 T-27 Cut-off Whl
  • 6 x 168 Non-Woven Belts
  • 4" Crimped Wire Wheels
  • 1-1/2" Type-M Non-Woven QC Dis
  • 5" Single Row Knot Cup Brush
  • Accessories
  • Bench Mount Grinding Wheels
  • 1579GCW Venture Tape, White
  • 52 x 75 Coated Belts
  • 43 x 60 Coated Belts
  • 3-1/2 x 15-1/2 Non-Woven Belts
  • 9" & larger x 7/8 Fiber Discs
  • 1" Bulk Adh Transfer Tapes
  • 14" Vitrified Bench Wheels
  • 1/2 x 18 Coated Belts
  • Cartridge Roll Mandrels
  • Paint Trays
  • 3" Plater's Wire Wheels
  • Paint Trays
  • 10" Nylox Wheels
  • 9" x 11" Screen Sanding Sheets
  • Grinding Products
  • 6" PSA Coated Abr Discs
  • 4" Crimped Wire Wheels
  • 11/16" Power Tube Brushes
  • 3" Crimped Mounted Wire Wheels
  • Plain-Back Abrasive Rolls
  • 4"x7/8 Fiber Discs
  • 6" Metal/Mult Finishing Wheels
  • 8" PSA Coated Abr Discs
  • 4-1/2" x 11" Plain Sheets
  • Walter Blendex Drums
  • 13" Metal Foil Tapes
  • Unitized Wheels
  • 14" Light Finishing Wheels
  • 1" Type-R Quick-Chg Discs
  • 3" Type-M Non-Woven QC Disc
  • 4 x 79 Coated Belts
  • 7"x7/8 Fiber Discs
  • Accessories
  • 6" Safety Walk Traction Tape
  • 12" Flap Brushes
  • Grinding Wheels, Sait
  • 3" Flap Wheels, 1/4" shank
  • Floor Sanding Sheets, Various
  • Type-M Non-Woven QC Discs
  • 1-1/8 x 21 Non-Woven Belts
  • 5" Hook Coated Abr Discs
  • #363 High Temperature Tape
  • 4" Encapsulated Knot Wheels
  • Flap Rolls, Abrasive
  • 3" Flap Wheels, 1/4" shank
  • First Aid Refill Supplies
  • 2 x 72 Non-Woven Belts
  • 6" x 7/8 T-27 Cut-off Wheels
  • 3/8" Mini Flap Wheels
  • 3 x 90 Non-Woven Belts
  • 1" Type-M Non-Woven QC Disc
  • 9" Grinding/Bench Wheels
  • 3/4" dia Half Taper Cart. Roll
  • 1.25 Finesse-It Buffs & Polish
  • Detail Lacquering Brushes
  • 3-1/2" Flap Wheels
  • 3-1/4" Foam Polishing Discs
  • 5" Discs, PSA, no dust holes
  • Quick-Change (Spin-on) Discs
  • 4" Type-R Quick Chg Disc Pads
  • Backup Pads, PSA
  • 7" Diamond Wheels
  • 3" 1/4"ch T-1 Cut-off Wheels
  • B Shape Mounted Points
  • 4" Metal Foil Tapes
  • 3" Type-S Non-Woven QC Discs
  • 5" Non-Woven Hook & Loop Disc
  • 4-1/2" Flap Discs, Sait
  • Flap Wheel Brushes
  • 1" Knot Wire End Brush
  • 4" T-27 Cut-off Wheels
  • 6" Hook Discs (no holes)
  • Film-Back Sheets
  • 6" SiC Green Bench Wheels
  • #200 Tartan Masking Tapes
  • 1.5" wide Sngl-Coat Film Tapes
  • Floor Sweeps
  • 4-1/2" T-29 Flap Discs
  • Non-woven Abrasive Sheets
  • 4-1/2" Clean & Strip Discs
  • 3 x 18 Coated Belts
  • 1-1/2 x 132 Non-Woven Belts
  • Carbide Burs
  • Walter ENDURO-FLEX Turbo Flap
  • 8" Discs, PSA, 6 dust holes
  • 5" Interleaf Flap Wheels
  • 3-2/3" x 9" Plain-Back Sheets
  • 1/2 x 20-1/2 Coated Belts
  • CP-66 Industrial Crepe Tape
  • 4" x 5/8" AH Flap Discs
  • 3M 1-3/8 in Finesse-It Disc Ro
  • 2 x 132 Non-Woven Belts
  • 5" Encap Cup Brushes
  • 15" Crimped Wire Wheels
  • Buffs & Polishes
  • 4 x 90 Coated Belts
  • 5" Hook Pad, Multi-hole / Mesh
  • 4" x 6" Interleaf Flap Wheels
  • 1" dia Straight Cart. Rolls
  • 6" Discs, PSA, no dust holes
  • 1" Coated Abrasive Rolls
  • Knot Wire Bevel Cup Brushes
  • 3/4" x 2" Plain-Back Sheets
  • 6" MX & Metalworking Wheels
  • 3 x 60 Coated Belts
  • 9"x5/8-11 T-1 Cut-off Wheels
  • Festool 3-1/4" Foam Polishing Discs
  • 15" Standard Twist Knot Wheels
  • 4-1/2" T-27 Cut-off Wheels
  • 20" T-1 Cut-off Wheel
  • 5/8" Power Tube Brushes
  • 9"x7/8" T-27 Cut-off Wheels
  • 3/8 x 13 Coated Belts
  • Backup Pads, Type-S (metal)
  • Compounds
  • Kits & Accessories, Rubber
  • 1/2 x 42 Coated Belts
  • Outdoor Products
  • Sticks, Rubber
  • 1/4 x 13 Non-Woven Belts
  • Flap Discs, Non-Woven
  • Stationary Belts, Misc Sizes
  • 9" T-27 Grinding Wheels
  • 3-1/2" PSA Coated Abr Discs
  • 1/8" Hand Tube Brushes
  • Foam Paint Brushes
  • 5/8" dia Straight Cart. Rolls
  • 4"x7/8 Fiber Discs
  • Type-R Quick-Change Discs
  • 3" / 72mm Tan Packaging Tape
  • 5" T-1 Cut-off Wheels
  • 4" Encap Cup Brushes
  • 4" Non-Woven Hook & Loop Disc
  • 3" PSA Coated Abr Discs
  • 10" Bench Mount Grinding Wheel
  • Type-R Non-Woven QC Discs
  • Cleaning Brushes
  • 12" Wheels
  • Walter 7/8" Arbor Flap Discs
  • 4"x.014 SS, M10 X 1.50ah (STA-
  • 1" Flap Wheels, 1/4" shank
  • 1-1/2" Finishing Flap Wheels
  • 6" Hook Discs, 8 dust holes
  • Wide Belts, VSM
  • 1" Power Tube Brushes
  • 2-3/4" Plain-Back Rolls
  • 8" Plain-Back Discs
  • 1-1/2" Type-R Non-Woven QC Dis
  • 7"x5/8-11 T-27 Grinding Wheels
  • 6 x 54 Coated Belts
  • 6-1/2" Flap Discs
  • 12" Diamond Wheels
  • 4" Non-Woven Hook & Loop Disc
  • Quick Change (Spin-On) Discs
  • 2 x 42 Coated Belts
  • 5" T-27 Grinding Wheels
  • Round Sticks, Rubber
  • 2" Minature Wheels
  • 5" T-29 Grinding Wheels
  • 4-1/2" Fiber Discs
  • 2 x 132 Non-Woven Belts
  • 1" Type-M Quick-Chg Discs
  • 2" Overlap Slotted Discs
  • 1/8 x 24 Coated Belts
  • 1-1/2" Type-M Non-Woven QC Dis
  • 2-1/2 x 14 Coated Belts
  • Walter Portacut Cut-off Wheels
  • 9-3/5" Metal Foil Tapes
  • Diamond Cutting Wheels
  • 8" Sanding Stars
  • 10" General Purpose Wheels
  • 1" Spiral Bands
  • 8" Finishing Discs
  • 1/4" Bulk Adh Transfer Tapes
  • 30 x 103 Coated Belts
  • 5" 36 grit Fiber Discs
  • 4-1/2"x7/8" T-27 Cut-off Wheel
  • 4-1/2"x7/8 Fiber Discs
  • 3 x 18 Non-Woven Belts
  • 4-1/2" T-27 Flap Discs
  • Backup Pads, PSA
  • 5-1/2" x 9" Paper Sheets
  • 6" Hook Discs, 9 dust holes
  • 4-3/16x11 SiC Waterproof Sa
  • 1 x 30 Coated Belts
  • 6" x 1" Non-Woven Flap Brushes
  • 6" T-1 Cotton Cut-off Wheels
  • 1" Flap Wheel, 1/4-20 shank
  • 7"x7/8" T-1 Cut-off Wheels
  • Weiler Vortec Pro Crimped Wire
  • 4" wide Single Coated Foam
  • Power Tube Brushes
  • Unitized Wheels, Non-Woven
  • 2" wide Single Coated Foam
  • 2" wide Sngl-Coated Film Tapes
  • 13/16" Encapsulated Tube Brush
  • Type 18 Plugs
  • #8997 Polyimide Hi-Temp Film
  • 6" Encapsulated Crimped Wheel
  • 1-1/2" Type-S Quick-Chg Discs
  • 4 x 48 Coated Belts
  • 3/8 x 12 Coated Belts
  • 7" Standard Twist Knot Wheels
  • Teardrop Sheets
  • Discs, Coated Abrasive
  • Resin Bond, 1/4" shank
  • 3-1/2" Finishing Discs
  • Replacment Flap Systems
  • 3" Flap Wheels, 1/4" shank
  • 1-1/8 x 21 Coated Belts
  • 8" Bench Mount Grinding Wheels
  • 1 x 21 Coated Belts
  • 6" Hook Discs, Blue
  • 3/4" Type-R Quick-Chg Discs
  • 54 x 75 Coated Belts
  • Square Pads
  • 5" Double-Row Knot Cup Brush
  • 5"" Flap Discs
  • 5" Discs, PSA, 5 dust holes
  • 4-1/2" Metric Hub Wheels
  • 5" T-1 Cut-off Wheels
  • 7972 EVA Foam-Back Abrasives
  • 1" Crimped Wire End Brushes
  • 12" Buff & Polich Wheels
  • 3" T-1 Grinding Wheel
  • 4-1/2" T-27 Flap Discs
  • Mounted Points, 1/8" shank
  • 3-1/2" Single Row Knot Cup Br
  • 6" Hook Discs, Blue
  • 6" Hook Coated Abr Discs
  • Grinding Wheels, Norton
  • Raptor Composite Nails & Staples
  • 1 x 42 Coated Belts
  • 6 x 132 Coated Belts
  • Backup Pad, 4x5/8-11 Med Hook
  • Walter Zip Wheels
  • 3" Flap Brushes
  • 3M File Belt Sander Accy
  • 7/8" Rectangular Tube Brush
  • 8 x 60 Coated Belts
  • 1/2" Crimped Wire End Brush
  • Type-R Quick-Change Discs
  • 2-1/2" Nylon Wheels
  • 4 x 132 Coated Belts
  • 2 x 42 Coated Belts
  • 19" Metal Foil Tapes
  • Hand Pads, Non-Woven
  • Compounds
  • 4" PSA Coated Abr Discs
  • 3" Type-S Quick Chg Disc Pads
  • 1-1/2" Mounted Flare Cup Brush
  • 4" PSA Coated Abr Discs
  • 4-1/2" Diamond Wheels
  • 3/8"" x 2"" Plain-Back Sheets
  • Linear Finishing Accessories
  • 7" T-27 Flap Discs
  • 1 x 24 Coated Belts
  • Walter 5" Cut-Off Wheels
  • 5" Discs, PSA, 5 dust holes
  • 3" NW Disc Holders
  • 1/2" Banded Crimped End Brush
  • TrueFit Premium Gloves
  • 5"x5/8-11 T-27 Grinding Wheels
  • 9"x7/8" T-29 Grinding Wheels
  • W Shape Mounted Points
  • 5" Hook Discs (no holes)
  • 3" .040 SiC - 120 1/2-3/8 A.H.
  • Topcut Sanding Discs
  • VersaFlow PAPR
  • 2" Flap Wheels
  • 3/8 x 13 Coated Belts
  • 4 x 90 Coated Belts
  • 3/4" Type-R Quick-Chg Discs
  • 3 x 7-1/4 & 7-3/8 Coated Belts
  • 6" Bench Mount Grinding Wheels
  • 8" x 2" Non-Woven Flap Brushes
  • 1-1/2" wide Single Coated Foa
  • 4-7/8" Double Row Knot Wheels
  • 1/2" dia Full-Taper Cart. Roll
  • Bio-Circle Accessories
  • NO-662610-58501
  • Accessories & Misc
  • 5" 80 grit Fiber Discs
  • Versaflo Speedglas Accessories
  • 4 x 36 Non-Woven Belts
  • Half-Taper Cartridge Rolls
  • 5/16" dia Straight Cart. Rolls
  • 4-1/2" Non-Woven Abr Rolls
  • 3" Type-M Non-Woven QC Disc
  • 6" Encapsulated Knot Wheels
  • 2" Type-S Non-Woven QC Discs
  • T-27 Depress Center Cut-off Wh
  • 8" Light Finishing Wheels
  • SS Curved Handle Scratch Brush
  • 3/4" Type-S Non-Woven QC Discs
  • Walter Quick-Step Abrasive Sys
  • 4" x 4" Flap Wheels
  • CP-83 GP MaskingTape
  • 2" Square Pads
  • 1-1/2" Type-M Non-Woven QC Dis
  • 1-1/2" Square Pads
  • 2" Non-Woven Rolls
  • 9" x 11" Cloth Sheets
  • 3" Mini Flap Discs
  • Type 17 Cones
  • 1000-**-0103 Components
  • 4 x 76 Coated Belts
  • 5" Flaring Cup Wheels
  • 1.88 mm Metal Foil Tapes
  • 2-1/2" Flap Wheels
  • 1/4" Hand Tube Brush
  • 37 x 75 Coated Belts
  • 3/4" Type-S Quick Chg Disc
  • 1-1/4" Rectangular Tube Brush
  • 2" Mini Flap Discs
  • Translucent VHB Foam Tapes
  • Discs, Non-Woven
  • Quick-Change (Spin-on) Discs
  • 4" T-27 Flap Discs
  • 11" Hook Disc Pad, no dust hol
  • 6" Hook Discs, 8 dust holes
  • Surfox ID Testers
  • 5/8" wide Single Coated Foam
  • Coated Abrasives, Wendt
  • 1050-**-0103 Components
  • 7"x7/8" T-1 Cut-off Wheels
  • 4" Non-Woven Flap Brushes
  • 5/16" Power Tube Brushes
  • 4"x5/8 Fiber Discs
  • 1" Hand Tube Brush
  • 4-1/2" x 5-1/2" Paper Sheets
  • 1 x 18 Non-Woven Belts
  • Shape "D", 1/8" Shank Burs
  • 7"x7/8 T-28 Angled Wheels
  • 1/4" dia Half Taper Cart. Roll
  • 4-1/2" Felt Flap Discs
  • 8" Hook Discs, 8 dust holes
  • 2" PSA Coated Abr Discs
  • 9"x5/8-11 T-27 Cut-off Wheels
  • 3 x 10-11/16 Non-Woven Belts
  • 4-1/2"x7/8" T-1 Cut-off Wheels
  • Cones, Plugs, Mounted Points
  • 6" Stringer Bead Knot Wheels
  • 4" Type-R Quick-Chg Discs
  • 7" Standard Twist Knot Wheels
  • Specialty Abrasives
  • Wide Belts, Arc
  • 6 x 89 Coated Belts
  • Small Belts, VSM
  • 5" Stringer Bead Knot Wheels
  • Festool 3" Diamant Sanding Discs
  • 5/8" Bulk Adh Transfer Tapes
  • 1/2 x 34 Non-Woven Belts
  • 3-1/4" PSA Abrasive Rolls
  • Accessories & Misc
  • Pink (Tough Steels)
  • 3 x 60 Coated Belts
  • 7+" Metal Foil Tapes
  • 5" 36 grit Fiber Discs
  • 6" T-1 Cut-off Wheels
  • 2-3/4" Combi-Twist Knot Cup Br
  • Knot Bevel Wheels
  • 2" Type-R Cotton Chg Disc
  • Buckets
  • 6" Unitized Wheels
  • Miscellaneous
  • Walter Stainless Flap Discs
  • 8" Finishing Wheels
  • 3" Non-Woven Hook & Loop Disc
  • 3/4" Minature Wheels
  • 1-1/2 x 32 Non-Woven Belts
  • 10" Crimped Wire Wheels
  • Disc Accessories
  • 7/8" Minature Wheels
  • 3/4"" x 2"" Plain-Back Sheets
  • 4-1/2" NW Disc Holders
  • 3/4" (18mm) Crepe Masking Tap
  • 12" & larger Vinyl Tapes
  • Rolls, Plain-Backed
  • 3" Nylon Wheels
  • 15" and larger PSA Discs
  • Unitized Package Refills
  • Accessories, Adapters, Arbors
  • 4-1/2" Hook Disc Backup Pad
  • 3/8" Rectangular Tube Brush
  • 1-1/2" T-1 Cut-off Wheels
  • Discs, Non-Woven
  • 4-1/2" T-27 Flap Discs
  • 3" wide Utility Tapes
  • 5" Non-Woven Hook & Loop Disc
  • 3/8" Flap Wheels, 1/8" Shank
  • Type 16 Cones
  • 1-1/2 x 60 Coated Belts
  • 1 x 42 Non-Woven Belts
  • 14" Short-Trim Twist Knot Whl
  • Light Finishing Whels
  • 5" T-29 Angled Flap Discs
  • 7" 100 grit Fiber Discs
  • 3" Interleaf Flap Wheel
  • 2-3/4" Single Row Knot Cup Br
  • 25" Metal Foil Tapes
  • Film-Back Sheets
  • 1-1/2" PSA Coated Abr Discs
  • 24" Foil Tapes
  • 1/2 x 18 Non-Woven Belts
  • 2" wide Utility Tapes
  • Minature Mounted End Brush
  • 3/8" Masking Tapes
  • 1-1/2" Minature Mounted End Br
  • 3M #483 Polyethylene Tape
  • 1/2 x 42 Coated Belts
  • Stationary Belts, Norton
  • 1 x 132 Coated Belts
  • 3/4" Type-S Quick-Chg Discs
  • 1-1/2" Flap Wheels, 1/4-20 Q.C
  • 7" Flap Discs
  • 4" x 2" Interleaf Flap Wheels
  • 6" T-27 Grinding Wheels
  • Quick Change (Spin-On) Non-Woven Discs
  • 1/4" Spiral Bands
  • Small Scratch Brushes, Brass
  • 3/8" dia Cartridge Rolls
  • Deburring Wheels
  • 4" Knot Bevel Brush Wheels
  • 3-11/16 Festool Triangle Sheet
  • 8" Standard Twist Knot Wheels
  • 4" Polishing Pads
  • 1-1/2" Nylox Wheels
  • 6" Hook Discs, 8 dust holes
  • 11-1/4" Finishing Discs
  • 11" PSA Coated Abr Discs
  • 1/2" dia Straight Cart. Rolls
  • 2" Non-Woven Stars
  • Sanding Discs
  • 6-1/2" Flap Discs
  • 3/4 x 168 Coated Belts
  • 4" Fiber Discs
  • 4-1/2" Non-Woven Flap Disc
  • 18" Metal Foil Tapes
  • 4" Flap Discs
  • 27" Bulk Adh Transfer Tapes
  • 8" x 1/2" Grinding Wheels
  • 1/4 x 24 Coated Abr Belts
  • 6" T-27 Grinding Wheels
  • 4" Flap Wheels
  • 6" Hook Discs, 9 dust holes
  • 4-1/2" Unitized R/A Discs
  • 8 x 61 Coated Belts
  • 5" Film-Back Hook/Loop Discs
  • 6" Non-Woven Wheels
  • 2-1/2 x 72 Coated Belts
  • 4 x 15 Non-Woven Belts
  • 4" Double Row Knot Brush
  • Block Brushes
  • 3/4" Crimped Wire End Brush
  • 3" / 72mm Tan Packaging Tape
  • 3/4 x 18 Coated Belts
  • 12" General Purpose Wheels
  • 1-1/2" Tube Center Nylox Wheel
  • 3" Gaffer Matte Cloth Tape
  • Encapsulated Wire Wheels
  • Backup Pad, 7x5/8-11 Med Hook
  • 2-3/4" PSA Abrasive Rolls
  • 8" Non-Woven Hook & Loop Disc
  • 2-1/2 x 60 Non-Woven Belts
  • 5" PSA Disc Pad, 5 dust holes
  • 8-3/4" Metal Foil Tapes
  • 2-3/4 x 15-1/2 Coated Belts
  • 6" x 1/2" AH Non-Woven Discs
  • 1 x 72 Coated Belts
  • 18" Safety Walk Traction Tape
  • 5" Polishing Pads
  • Bonded Abrasives, Weiler
  • 3" T-1 Cut-off Wheels
  • 1/4 x 18 Coated Belts
  • #218 Fine Line Masking Tape
  • 4-1/2" Diamond Wheels
  • 4-1/2" Fiber Discs
  • 7/16" 320 .022 SiC - M-Brad Po
  • 5" Discs
  • 1-1/4 x 144 Coated Belts
  • 2-1/2" Flap Wheels, 1/4" shank
  • 3M Finesse-It Buff & Polish Sa
  • Hot & Cold Products
  • 3/4 x 108 Coated Belts
  • 2-1/2" Mini Flap Discs
  • Discs
  • Misc Width Bulk Adh Xfer Tapes
  • Flex 4" Clean & Strip Wheels
  • 4-1/4" x 4-1/2" PSA Sheets
  • 3/4" Flap Wheels, 1/4" Shank
  • Sanding Screen Abrasive Sheets
  • Stringer Bead Knot Wheels
  • 9"x5/8-11 T-1 Cut-off Wheels
  • Half-Taper Cartridge Rolls
  • Double-Sided Film Tape x Width
  • 14" High Strength Discs
  • 5" Cloth-Back PSA Discs
  • #214 Heat Resistant Mask Tape
  • Encapsulated End Brushes
  • 3-1/2" Double-Row Knot Cup Br
  • Bushings & Wheel Adaptors
  • 3" Type-M Quick-Chg Discs
  • 2-3/4" Knot Wire Wheels
  • 6" DF-8 Hook Discs, Blue
  • 4" Square Pads
  • 5" x 5/8-11 Fiber Discs
  • 2" wide Utility Tapes
  • 1" High Strength Discs
  • Dual-Lock Type 400
  • 7" Fiber Disc Back-up Pads
  • 3/8" wide Single Coated Foam
  • A46N Aluminum Grinding Wheels
  • 1-3/8" Flap Wheel, 1/4" shan
  • 4-1/2" Knot Wire Bevel Brush
  • 3" Flap Wheels, 1/4-20 QC
  • 37 x 60 Coated Belts
  • 5" Fiber Discs
  • 48" Vinyl / Plastic Tapes
  • 3-2/3x9 Non-Woven Sheets
  • 1 x 60 Coated Belts
  • 9 x 48 Coated Belts
  • 10" SiC Green Bench Wheels
  • Rolls, Coated Abrasive
  • 1/4" x 6" Plain-Back Sheets
  • Shape "H", 1/4" Shank Burs
  • Walter Pipefitter Spin-On Grin
  • Cut-off Wheels
  • 4" T-27 Flap Discs
  • First Aid Stations
  • 3/4" wide Sngl-Coat Film Tapes
  • 5" Discs, PSA, 5 dust holes
  • 5" NW Disc Holders
  • Sydkleen Holder 1/4" Sh For 3/
  • Mounted Points, 1/8" shank
  • Parts Cleaning Brushes
  • 7"x5/8-11 Fiber Discs
  • 4" Hard / Treated Cloth Wheel
  • 37 x 75 Coated Belts
  • Brown (Stainless Steel)
  • 4-1/2" 50 grit Fiber Discs
  • 1001-**-0103 Components
  • Walter TWIST Quick Change Back
  • Hand Pad / Sheet Holders
  • 2-1/2 x 60 Coated Belts
  • 12" Diamond Wheels
  • 10" Hard/Treated Cloth Wheels
  • Rolls, Coated Abrasive
  • 8" Film-Back Hook/Loop Discs
  • 2" Type-R Non-Woven QC Disc
  • 10" Nylox Disc (Cup) Brush
  • #481 Preservation Sealing Tape
  • 4-1/2" 36 grit Fiber Discs
  • Wire Cup Brushes (Knotted)
  • 8" Non-Woven Flap Brushes
  • Belts, Non-Woven, Portable
  • 1-1/2" 80 .040 SiC - M-Brad Po
  • Shape "E", 1/4" Shank Burs
  • 8" Encap Crimped Wire Wheel
  • 7" Fiber Discs
  • 1/2" x 7" Plain-Back Sheets
  • 1" Side-Wall Cartridge Roll
  • Discs
  • 3-1/4" X 5-1/4" PSA Sheets
  • 4" T-29 Flap Discs
  • Sanding Discs, Plain-Backed
  • Fiber Discs, Sait
  • 5/16" dia Half Taper Cart. Rol
  • 4-1/2" x 5/8 Flap Discs
  • 3"x1-1/2"x1/4-20 Flap Brush
  • 12" Portable/Gas Saw Wheels
  • 36 x 60 Coated Belts
  • Weiler Wire Cup Brushes with S
  • Type-R Quick-Change Discs
  • 4" Hook Disc Backup Pads
  • 3 x 132 Non-Woven Belts
  • Portable/Gas Saw Wheels
  • Sheet Backup Pads
  • 11" Hook Discs (no holes)
  • 9" x 11" Plain-Back Sheets
  • 2-3/4 x 15-1/2 Coated Belts
  • 5xNH High Strength Discs
  • Back-up Pads, Quick-change
  • 1-1/4 x 60 Coated Belts
  • 1-1/2" Type-S Non-Woven QC Dis
  • 3/4" Type-R Non-Woven QC Disc
  • 24" Safety Walk Traction Tape
  • 6" Nylox Wheels
  • 1/8 x 24 Coated Belts
  • 2 x 48 Non-Woven Belts
  • Hand Pads, Non-Woven
  • 2-3/4" Metal Foil Tapes
  • 4-1/2" 50 grit Fiber Discs
  • 6" Hook Multi-hole/Mesh Discs
  • 12" Buff & Polich Wheels
  • Carbide Bur Accessories
  • 3 x 21 Non-Woven Belts
  • 1/2 x 20-1/2 Non-Woven Belts
  • 25 x 75 Non-Woven Belts
  • Sweep Floor Brushes
  • 3/16" dia Cartridge Rolls
  • 9" x 11" Paper Sheets
  • 12" Dbl Row Knot Wheels
  • 49.5 mm Metal Foil Tapes
  • 9" x 11" Plain-Back Sheets
  • Bridled Knot Cup Brushes
  • 1" Type-S Quick-Chg Discs
  • 6" DF-6 Hook Discs
  • Festool 3-11/16" Saphir H&L Triangle
  • 4" T-27 Grinding Wheels
  • Discs, Coated Abrasive
  • #2020 Masking Tape
  • A Shape Mounted Points
  • 2" Flap Wheel, 1/4" shank
  • 1-1/2" Sanding Stars
  • 4-1/2" Flap Discs
  • B shape Abrasive Caps
  • TrueFit Super Premium Gloves
  • 2" Spiral Bands
  • 3" Interleaf Flap Wheel
  • 8" Disc Pad, 5/8-11
  • #8896 Strapping Tape
  • 6" CombiTwist Knot Wheels
  • Cut & Polish Wheels
  • Straight Cartridge Rolls
  • 5" Discs, PSA, 8 dust holes
  • 5" Flap Wheels
  • 3" Sanding Stars
  • 7" Fiber Discs
  • Non-Woven Products
  • 6" Stringer Bead Knot Wheels
  • Hand Pads & Sponges
  • Portable Belts, Carborundum
  • 6" T-1 Grinding/Bench Wheels
  • 6" Finishing Discs
  • Gray Foam Tapes
  • 7" T-27 MTX Cotton Wheels
  • 5" Hook Discs, 9 dust holes
  • 5/16" Minature Stem-Mounted
  • 7" x 5/8-11 Flap Discs
  • 12+" & wider Metal Foil Tape
  • Waterproof Wet/Dry Sheets
  • 2 x 132 Coated Belts
  • 4-1/2"x5/8-11 T-1 Cut-off Whl
  • Pathogen/Bloodborne Protection
  • 5" x 5/8-11 T-1 Cut-off Wheels
  • 2-3/4" Mounted Cup Brush
  • 2-3/4" Crimped Wire Cup Brush
  • Non-Woven Accessories
  • 3" x 4" PSA Sheets
  • 1-1/2" Coated Abrasive Rolls
  • Roof Brush
  • Back-up Pads, Fiber Discs
  • 2" Unitized Wheels
  • 23" Metal Foil Tapes
  • 3" .035 SiC - 180 1/2" A.H., M
  • 4-1/2" T-1 Cut-off Wheels
  • Sanding Star Mandrels
  • 1-1/2"/36mm Tan Packaging Tape
  • 2" wide Foam Tapes
  • 4 x 106 Diamond/SuperAbr Belts
  • 4" Diamond Wheels
  • Hand Pads & Sponges
  • First Aid Kits - Bulk Contents
  • 2-3/4" Encap Cup Brushes
  • 6 x 108 Coated Belts
  • 3" Clean & Strip Wheels
  • 6"x5/8-11 T-1 Cut-off Wheels
  • Non-Woven Flap Brushes
  • 4" .040 SiC - 80 5/8-11 Thread
  • 9x11 Waterproof Sheets
  • 3/8" Rectangular Tube Brush
  • 3 x 24 Coated Belts
  • 4" Non-Woven Hook & Loop Disc
  • Type 18 R Plugs (Rounded)
  • 4 x 72 Coated Belts
  • 3-1/2" Combi-Twist Knot Cup Br
  • 2" Encapsulated Knot Wheels
  • 3/4" Flap Wheels, 1/4" Shank
  • 4-1/2" Hook Discs, 9 dust hole
  • 2 x 90 Coated Belts
  • 1" Flap Wheels
  • 5/8" Rectangular Tube Brush
  • 3/4 x 426 Coated Belts
  • 3-1/2" Metal Foil Tapes
  • Z-Foam Profile Sponges
  • 2-1/2 x 60 Coated Belts
  • 7" Dbl Row Knot Wheels
  • Grinding Paste
  • 1 x 18-15/16 Non-Woven Belts
  • T-LOC Pipe Polishing Belts
  • 6" Fiber Discs
  • 1/2" Crimped Wire End Brush
  • 12" Encapsulated Crimped Wheel
  • 3" Non-Woven Hook & Loop Disc
  • 1/2" ATG Adh Transfer Tapes
  • 1/2"" x 7"" Plain-Back Sheets
  • Felt Flap Wheels
  • 1" Flap Wheels
  • Folded Flap Wheels
  • 3" NW Disc Holders
  • First Aid
  • 3-2/3" x 9" Paper Sheets
  • 4-1/2" T-27 Cut-off Wheels
  • Walter 2-in-1 Drums
  • 6-1/2" Flap Wheels
  • 3" Type-M Quick-Chg Discs
  • 18" x 18" Plain-Back Sheets
  • Flap Discs, Wendt
  • 12" Nylox Wheels
  • 1" / 24mm Clear Packaging Tap
  • 1" Type-S Quick-Chg Discs
  • 4" General Purpose Wheels
  • 1/4 x 13 Coated Belts
  • 1-1/16" Rectangular Tube Brush
  • 2 x 18 Non-Woven Belts
  • 1" Controlled Flare End Brush
  • 3/8" dia Full-Taper Cart. Roll
  • 2-1/2" dia Flap Bands
  • 6" & widee Single Coated Foam
  • 5/16" Crimped Mtd Wheels
  • 2-1/2" Non-Woven Bands
  • 4"x1/4 Fiber Discs
  • Hook Triangle Sheets
  • Rolls, Non-Woven
  • 2-1/2" Tube Center Wire Wheels
  • 4-1/2" Cable Twist Knot Wheels
  • 3M #665 Tape
  • 4-1/2" Fiber Discs
  • 1 x 21 Non-Woven Belts
  • 8" T-1 Grinding/Bench Wheels
  • 1/4 x 24 Coated Belts
  • 1-1/2 x 24 Non-Woven Belts
  • 1001-**-0103 Components
  • 1/2 x 20-1/2 Non-Woven Belts
  • 1" Type-S Non-Woven QC Discss
  • 9" T-29 Grinding Wheels
  • Hand Brushes
  • 2-3/4" x 16-1/2" Hook Sheets
  • Stationary Belts, Misc Sizes
  • 4-1/2"x7/8" T-1 Cut-off Wheels
  • Quick Change (Spin-On) Discs
  • Walter TWIST Quick Change Blen
  • Toothbrush Scratch Brushes
  • 38" Metal Foil Tapes
  • 3/8 x 18 Non-Woven Belts
  • Hook Non-Woven Discs
  • 6" x 2" Non-Woven Flap Brushes
  • 1/2" dia Full-Taper Cart. Roll
  • 4-1/2" T-27 Cut-off Wheels
  • 3/4" Type-R Quick-Chg Discs
  • 10" Nylox Disc (Cup) Brush
  • 8" Hook Coated Abr Discs
  • 5-1/2" x 7" Hook Sheets
  • 1/2" Banded Nylox End Brush
  • Stem Mounted Brushes
  • Flannel Buffing Wheels
  • Backup Pads, Type-M (prongs)
  • 5/16" Rectangular Tube Brush
  • 4-1/2"x7/8" T-29 Grind Wheels
  • #3723 Packaging Tape
  • Discs, Non-Woven Finishing
  • Wheels, Clean & Strip
  • 6" Encapsulated Knot Wheels
  • Bonded Abrasives, Sait
  • 5/8" dia Cartridge Rolls
  • 2-1/2" T-1 Cut-off Wheels
  • 15" Short-Trim Twist Knot Whl
  • 19 x 60 Non-Woven Belts
  • 10" High Strength Discs
  • 4"+ Bulk Adh Transfer Tapes
  • 4" Clean & Strip Wheels
  • Stationary Belts, Misc Sizes
  • 4" Type-M Quick-Chg Discs
  • #890 Industrial Filament Tape
  • 3/4" x 2" Plain-Back Sheets
  • 2" Type-S Non-Woven QC Discs
  • 2-1/2 x 48 Coated Belts
  • 1-1/8" Nylon Abr Tube Brushes
  • 3" Nylox Disc (Cup) Brush
  • Red Cross Responder Tubes
  • 14" PSA Coated Abr Discs
  • 4" Type-R Quick-Chg Discs
  • 3/16" Nylon Abr Tube Brushes
  • Handles
  • 1/2" Side-Wall Cartridge Roll
  • Grinding Wheels, Carbo
  • 6 x 48 Non-Woven Belts
  • 9"&larger x 5/8-11 Fiber Discs
  • 8" Non-Woven Flap Brushes
  • 1-1/2" Type-S Quick-Chg Discs
  • 25 x 48 Coated Belts
  • 52 x 103 Coated Belts
  • 4-1/2" Non-Woven Hook Discs
  • Walter TWIST Quick Change Felt
  • 3/4" wide Foam Tapes
  • 7" Unitized Wheels
  • Linear Finishing - Wheels
  • 3/4 x 20-1/2 Non-Woven Belts
  • 1/8" dia Straight Cart. Rolls
  • Staionary Belts, Misc Sizes
  • 2" Type-R Quick-Chg Discs
  • 6" Deburring Wheels
  • Weiler Knot Wire Cup Brushes -
  • Square Pads
  • 4" Knot Bevel Cup Brush
  • 25 x 75 Non-Woven Belts
  • Fiber Discs, Standard
  • 14" Deburring Wheels
  • 13/16" 80 .040 SiC - M-Brad Po
  • 2" Mini Flap Discs
  • Flap Brushes
  • 5" Standard Twist Knot Wheels
  • Sanding Sponges
  • 4 x 24 Non-Woven Belts
  • T-1 Straight Grinding Wheels
  • 12" Crimped Wire Wheels
  • 7/8" Power Tube Brush
  • 6-1/2" x 1" Flap Wheels
  • 3-1/2 x 15-1/2 Non-Woven Belts
  • Type-S Non-Woven QC Discs
  • 12" and larger Discs
  • 3/8" x 2" Plain-Back Sheets
  • Bristle Discs
  • 2-3/4" Power Tube Brushes
  • Interleaf Flap Wheels
  • 3" Type-S Quick-Chg Discs
  • 11" Hook Discs (no holes)
  • 9"x7/8" T-29 Grinding Wheels
  • 5" x 7/8 T-27 Cut-off Wheels
  • 1-1/2" Nylon Abr Tube Brushes
  • 4" Type-R Non-Woven QC Disc
  • 4-1/2" Trim-Kut Disc Pad
  • Vinyl/Plastic Tapes by width
  • 5" 50 grit Fiber Discs
  • Cut-off Wheels
  • 3/8" dia Cartridge Rolls
  • 2" Type-S Quick-Chg Discs
  • Hook & Loop Discs
  • Festool 4-1/2" RAS 115 Sanding Discs
  • 10" PSA Coated Abr Discs
  • 3" Type-R Non-Woven QC Disc
  • Shape "M", 1/8" Shank Burs
  • Back-up Pads, Quick-change
  • 1/8" dia Full-Taper Cart. Roll
  • 3/4" Type-M Quick-Chg Discs
  • #421 DarkSilver Lead Foil Tape
  • 4" Type-R Non-Woven QC Disc
  • 7" Felt Polishing Discs
  • 52 x 75 Coated Belts
  • Cut-off Wheels
  • 1" Type-R Non-Woven QC Disc
  • Tube Brush Holders
  • 3/8" Flap Wheels, 1/8" Shank
  • 7" x 7/8 Flap Discs
  • 5" Hook Discs, 5 dust holes
  • 3+" Foil Tapes
  • S2237.4334.0400
  • 6" A/O GP Bench Wheels
  • Miscellaneous
  • 3" Coated Abrasive Rolls
  • 12" Diamond Wheels
  • Non-Woven Blocks
  • 1" Crimped Wire Cup Brushes
  • 9" x 11" Film-Back Sheets
  • 1-1/2" Circular Flared End Br
  • 19 x 60 Non-Woven Belts
  • #600 Premium Packaging Tape
  • 2" Type-S Quick Chg Disc Pads
  • 3" Flap Wheels
  • Std Crimped Wire End Brushes
  • Walter ALLSTEEL Grinding Wheel
  • 6" Fiber Discs
  • 2-1/2" Flap Wheels
  • 7" T-1 Grinding/Bench Wheels
  • 3/4 x 18 Non-Woven Belts
  • Wheel Mandrels/Bushings/Adapte
  • 3/8" Bulk Adh Transfer Tapes
  • Discs, Non-Woven
  • 3/8" dia Straight Cart. Rolls
  • 1/2" x 7" Plain-Back Sheets
  • 13-3/4" Metal Foil Tapes
  • 5/16" dia Power Tube Brushes
  • 2" Safety Walk Traction Tape
  • CP-66 Delicate Surface Tape
  • Mandrels
  • 12" Stringer Bead Knot Wheels
  • 12" Light Finishing Wheels
  • 10" Nylox Disc (Cup) Brush
  • 1/2" / 12mm Packaging Tapes
  • 3/4 x 18 Non-Woven Belts
  • 7" x 5/8-11 Flap Discs
  • 6" Standard Twist Knot Wheels
  • 4-1/2" Polishing Pads
  • 4-1/2" Crimped Wire Wheels
  • 4-1/2" Non-Woven Flap Discs
  • 3 x 132 Non-Woven Belts
  • 60 mm wide Double-Coated Film
  • Wound Dressings
  • 1/2" dia Full-Taper Cart. Roll
  • 3" Type-R Quick Chg Disc Pads
  • Wire Hand Brushes
  • 5" Hook Discs, Blue
  • Backup Pads, Type-S (metal)
  • 5" PSA Coated Abr Discs
  • 4-1/2"x5/8-11 T-29 Grind Wheel
  • Belts
  • 1/4" Power Tube Brushes
  • 4"x1/4 Fiber Discs
  • 4" SS Wire Knot Cup Brushes
  • 36" Bulk Adh Transfer Tapes
  • Rectangular (Flat) Tube Brush
  • Non-Woven Abrasives, Carbo
  • Detail Sponges, 3/16" thick
  • Linear Finishing Abrasives
  • 37 x 75 Non-Woven Belts
  • 1-3/4" wide Foam Tapes
  • 9"x7/8" T-29 Grinding Wheels
  • 72 mm Metal Foil Tapes
  • 1-3/16" Flap Wheels
  • Small Belts, Sia
  • 7" x 5/8-11 Flap Discs
  • 4" PSA Coated Abr Discs
  • Walter Ripcut Stainless Cut-Of
  • 8" Flap Wheels
  • Medications/Tablets
  • Walter TWIST Quick Change Unit
  • 1/2 x 24 Coated Belts
  • 3 x 10-11/16 Coated Belts
  • 2" Non-Woven Flap Discs
  • 3-1/2" Hook Coated Abr Discs
  • 7" Fiber Discs
  • 2" Finishing Discs
  • 4-1/2" T-27 Cotton Cut Wheels
  • 3/4" Flap Wheels
  • VersaFlow PAPR
  • 1/2" (12mm) Foil Tapes
  • 6 x 48 Non-Woven Belts
  • 9" PSA Coated Abr Discs
  • 3/4" Type-R Quick Chg Disc
  • T-27 D/C Grinding Wheels
  • Polishing Compounds & Accessories for Micromesh
  • TR-600 Series Versaflo
  • 2" Mini Flap Discs
  • 3/8" Coil Spring End Brush
  • 6" Fiber Discs
  • #860 Industrial Filament Tape
  • 1" Type-S Cotton Chg Disc
  • 7/16" Power Tube Brushes
  • 1" Square Pads
  • 2 x 42 Coated Belts
  • 2" Type-R Quick Chg Disc Pads
  • 6" T-1 Cotton Fiber Wheels
  • Communication Headsets
  • 10" PSA Coated Abr Discs
  • 1-3/4" Unitized Wheels
  • #3369 Aluminum Foil Tape
  • 2 x 42 Coated Belts
  • 5" Type-S Quick-Chg Discs
  • 4-1/2" 36 grit Fiber Discs
  • 3M Finesse-It Buff & Polish Pa
  • 15/16" Encapsulated Tube Brush
  • 6" x 1/2"ch Finishing Discs
  • 7" T-27 Flap Discs
  • 5" Sisal Fabric Wheels
  • 4" Interleaf Flap Wheel
  • Non-Woven Abrasives
  • 6" Flap Wheels
  • 5" T-27 Flap Discs
  • 4 x 132 Coated Belts
  • Wide Belts, Norton
  • 3/8 x 18 Coated Belts
  • 3M Finesse-It Buff & Polish Ba
  • 2-1/2" Flap Wheels
  • 3" Type-M Non-Woven QC Disc
  • Non-Woven Belts, Sia
  • 2 x 72 Coated Belts
  • Flap Discs, Sia
  • 7"x5/8-11 Fiber Discs
  • 3" Type-R Cotton Chg Disc
  • 4" SS Std Twist Knot Wheels
  • 4" Encapsulated Crimped Wheels
  • 3/8" Mini Flap Wheels
  • 6" 80 Rectangular Filament, Si
  • Walter Sanding and Coated Abra
  • 3/4" Spiral Bands
  • 3/4" Power Tube Brush
  • 3" Type-M Non-Woven QC Disc
  • 6" Hook Coated Abr Discs
  • 5" Nylox Disc (Cup) Brush
  • WEN-347480
  • 3 x 21 Non-Woven Belts
  • 2" Rectangular Tube Brush
  • 6" Unitized Wheels
  • 2-3/4" PSA Abrasive Rolls
  • 4" Plater's Wire Wheels
  • 10" Encapsulated Crimped Wheel
  • 5" x 5/8-11 Fiber Discs
  • 1" Non-Woven Flap Brushes
  • 18" T-1 Cut-off Wheels
  • Cleaners, Aqueous, Acidic
  • 1/4" Pencil End Brush
  • 1" Non-Woven Rolls
  • ATG Transfer Tapes x Width
  • 2" Tube Center Wire Wheels
  • T-27 Grinding & Blending Whls
  • 7" x .060" Cut-off Wheels
  • 1" Nylox End Brush
  • 6" Fiber Discs
  • 4-1/2"x5/8" Fiber Discs
  • Nylon Filament Disc Brush
  • Industrial Pump Sprayers and A
  • Backup Pads, PSA
  • 2" T-1 Grinding Wheels
  • 3/16" 320 SiC, 3-3/8 OAL 3/8 T
  • 3/8 x 12 Non-Woven Belts
  • 4" Plater's Wire Wheels
  • Cloth Back Sheets
  • American Red Cross Kits
  • 7" Flap Discs
  • Rectangular (Flat) Tube Brush
  • Small Type-S Quick Chg Pads
  • 1" Type-S Non-Woven QC Discs
  • 4" Type-R Non-Woven QC Disc
  • Flap Wheels
  • 10" Cable Twist Knot Wheels
  • 1/4 x 18 Coated Belts
  • 3" Power Tube Brushes
  • WEN-23601
  • 2 x 60 Non-Woven Belts
  • 6 x 48 Coated Belts
  • 14" Diamond Wheels
  • 3" Encapsulated Crimped Wheels
  • 5" x 5/8-11 T-1 Cut-off Wheels
  • 6" Flap Wheels
  • 4 x 54 Coated Belts
  • 3" Hook Coated Abr Discs
  • Polishing Compounds
  • Structural Adhesives, by Code
  • #371 Packaging Tapes
  • Crimped Wire Bevel Cup Brushes
  • 2" Polishing Pads
  • NO-662531-97530
  • 3 x 18 Coated Belts
  • 2 x 48 Coated Belts
  • Pneumatic Wheels/Tires
  • 2 x 132 Coated Belts
  • 8" Non-Woven Hook & Loop Disc
  • 9" T-1 Cut-off Wheels
  • 1/8" dia Full-Taper Cart. Roll
  • 1 x 24 Coated Belts
  • 10" Knot Bevel Wheels
  • 7"x7/8" T-29 Grinding Wheels
  • Hand Pads, Non-Woven
  • 25 x 48 Coated Belts
  • 4" x 3/8-24 Flap Discs
  • 6" Deburring Wheels
  • 4-1/2" x 5/8-11 Flap Discs
  • 5" NT 5/8-11 Quick-Chg
  • W Shape Non-Woven Mounted Pt
  • Backup Pad, 4-1/2x5/8-11 Med H
  • 5" PSA Disc Backup Pads
  • 6" Non-Woven Rolls
  • 37 x 103 Coated Belts
  • Coated Abrasives
  • 5" Hook Disc Pad, 8 dust holes
  • 4 x 24 Coated Belts
  • CS Shoe Handle Scratch Brushes
  • 1" Pilot End Wire End Brushes
  • 5" Flaring Cup Wheels
  • Flap Wheels
  • 5" T-27 Flap Discs
  • Cotton Bond Discs
  • 3" x 2" Non-Woven Brushes
  • 4" Interleaf Flap Wheels
  • 1/2 x 24 Coated Belts
  • 1-1/16" Power Tube Brushes
  • 1" dia Half Taper Cart. Rolls
  • 4" T-27 GFX Cotton Wheels
  • 2" Deburring Wheels
  • 4-1/2"x7/8" T-27 Cut-off Wheel
  • 2" Type-M Non-Woven QC Disc
  • 6" Non-Woven Hook & Loop Disc
  • 11" PSA Coated Abr Discs
  • 5" Discs
  • 5" Single Row Knot Cup Brush
  • Hand Brushes
  • Walter T-27 Stainless Grinding
  • 7" Non-Woven Hook & Loop Discs
  • 1 x 24 Non-Woven Belts
  • 8" Hook Disc Pad, 8 dust holes
  • 4-1/2" T-27 Flap Discs
  • 3" x 1/16 Cut-off Wheels
  • 8" Deburring Wheel
  • 2-1/2" Double-Row Knot Cup Br
  • TWIST Surface Finishing System
  • Backup Pads, Hook & Loop
  • Festool 3-11/16" Cristal H&L Triangle
  • 254 mm Metal Foil Tapes
  • 4-1/2" Finishing Discs
  • 8" x 1" Non-Woven Flap Brushes
  • Ammonia Inhalants
  • Circular Flared End Brush
  • Double-Sided Foam Tapes x CODE
  • 2" PSA Coated Abr Discs
  • A Shape Mounted Points
  • Knot Wire Cup Brush
  • 5" PSA Disc Backup Pads
  • 1-1/2" Flap Wheel, 1/4-20 Q.C.
  • 8" Discs, PSA, 6 dust holes
  • 7" x 1" Grinding Wheels
  • Flange Sets
  • 4-1/2" TN 5/8-11 Quick-Chg
  • 4" Nylox Wheel
  • Hand Tube Brushes
  • 3M Sander Accessories
  • Encapsulated Mounted Brushes
  • 1-1/4" Minature Mounted End Br
  • Abrasive Rolls, Misc Sizes
  • 3/4" wide VHB Tapes
  • 1/4 x 13 Non-Woven Belts
  • 1 x 42 Coated Belts
  • 25 x 60 Coated Belts
  • 1-1/2 x 60 Coated Belts
  • 2-3/4" Plain-Back Rolls
  • 6" x 2" Flap Wheels
  • 4-1/2" Diamond Wheels
  • 1-1/2" Encapsulated Crimped
  • 2" T-1 Cut-off Wheels
  • 7/8" Minature Wheels
  • 7" T-27 Flap Discs
  • Flat Handle Sign Brushes
  • 7" PSA Coated Abr Discs
  • 1/2 x 12 Non-Woven Belts
  • 6" Hook Multi-hole/Mesh Discs
  • 3" Type-S Quick Chg Disc Pads
  • 1" Bristle Discs
  • Non-Woven Belts, Walter
  • #355 Packaging Tapes
  • CP-66 Delicate Surface Tape
  • #863 Industrial Filament Tape
  • 3/4 x 18 Coated Belts
  • 2 x 18 Non-Woven Belts
  • 2-3/4" x 17-1/2" Plain Sheets
  • 4 x 36 Coated Belts
  • 1/4" Vitrified Mounted Points
  • 2" Felt Polishing Flap Disc
  • 3 x 72 Coated Belts
  • 1-1/2" wide VHB Foam Tapes
  • 10" PSA Coated Abr Discs
  • 11" Hook Multi-hole/Mesh Discs
  • 3/4" Type-S Quick Chg Disc
  • 10" dia & larger Flap Wheels
  • 3/4 x 24 Non-Woven Belts
  • 3/4" Tube Brushes
  • 6" Euro-9 Hook Discs, Blue
  • 6 x 300 Non-Woven Belts
  • 8-1/2" Metal Foil Tapes
  • 4-1/2" x 11" Plain Sheets
  • Walter 3" Sanding Wheels
  • 6" Flap Wheels
  • Staionary Belts, Misc Sizes
  • 8" Discs, PSA, 6 dust holes
  • E-Weld Nozzle Treatment
  • 9" T-27 Grinding Wheels
  • 3" 3/8"ch T-1 Cut-off Wheels
  • 1-1/8" 80 .040 SiC - M-Brad Po
  • 25 x 48 Non-Woven Belts
  • 5" PSA Coated Abr Discs
  • 7" T-27 Flap Discs
  • 1-1/2" wide Sngl-Coat Film
  • Abrasive Rolls
  • 9"x5/8-11 T-27 Cut-off Wheels
  • 3" Type-S Non-Woven QC Discs
  • 5" Non-Woven Rolls
  • 14" Nylox Disc (Cup) Brush
  • 1" dia Half Taper Cart. Rolls
  • 8" Non-Woven Hook & Loop Disc
  • 1-1/2" Type-M Quick-Chg Discs
  • 2" Type-M Quick-Chg Discs
  • Non-Skid / Traction Tape
  • Kits, Rubber
  • Can Scrubs Tampico
  • 4" Clean & Finish Wheels
  • Saucer Cup Brushes
  • 3-2/3" x 7" PSA Sheets
  • 3-3/4" Metal Foil Tapes
  • 6" .040 SiC 80 Round Filament,
  • 3/4" Safety Walk Traction Tape
  • Small Scratch Brushes, Nylon
  • 5" Unitized R/A Discs
  • 14" Diamond Wheels
  • SmartCompliance Refills
  • 5" x 7/8 Fiber Discs
  • 1-3/4" Crimped Wire Cup Brush
  • Crimped Wire Cup Brushes
  • Spindle Mount Discs
  • 6" Discs, Foam-backed
  • 11" Hook Disc Backup Pads
  • First Aid Kits-SmartCompliance
  • 3-1/2" Flap Wheels
  • 2 x 30 Coated Belts
  • 5/8 x 20-1/2 Non-Woven Belts
  • 5/8 x 20-1/2 Coated Belts
  • 1" Type-M Quick-Chg Discs
  • 1.2 x 24 Coated Belts
  • 3 x 21 Coated Belts
  • 7" SiC Green Bench Wheels
  • Flaring T-11 Cup Wheels
  • 9" T-28 Angled Grind Wheels
  • 1/2" Nylox End Brush
  • 7" T-29 Angled Flap Discs
  • 48" Bulk Adh Transfer Tapes
  • 6"x5/8-11 T-27 Grinding Wheels
  • 37 x 75 Coated Belts
  • 1-1/2" Unitized Wheels
  • Discs, Non-Woven
  • Walter 1/4" T-27 Stainless Sp
  • 8" x 2" Flap Wheels
  • 3/16" dia Half Taper Cart. Rol
  • 2-1/2" Mtd Flared Brushes
  • #862 Industrial Filament Tape
  • Walter 3" T-1 ZIP Cut-Off Whe
  • Discs, 8" Surface Conditionin
  • 4-1/2" x 5/8-11 Flap Discs
  • Tube Fitting Brushes
  • 2" Type-M Non-Woven QC Disc
  • 3-1/2" Hook Coated Abr Discs
  • 4" PSA Disc Pad
  • Surfox Marking and Etching
  • 7/8" wide VHB Foam Tapes
  • Clear Foam Tapes
  • 34" Metal Foil Tapes
  • Miniature Stem-Mounted Brushes
  • 5" Quick-Change Fiber Discs
  • 2" wide VHB Foam Tapes
  • 36 x 55 Coated Belts
  • 6 x 132 Coated Belts
  • Double Row Knot Wheels
  • 2" x 3" Grinding Wheels
  • 5" x 5/8-11 T-27 Cut-off Whl
  • 3-2/3" x 9" Waterproof Sheets
  • 3/4" Flap Wheels, 1/8" Shank
  • 8" Discs, PSA, 8 dust holes
  • 8" Light Finishing Whels
  • 4 x 36 Non-Woven Belts
  • Belts, Coated Abrasive
  • Diamond Abr Mounted Points
  • 4-1/2" TN 5/8-11 Non-Woven
  • 9" & larger Fiber Discs
  • 7" Diamond Wheels
  • Spin-on Disc/Wheel Holders
  • Walter TWIST Quick Change FX S
  • 4-1/2" NW Disc Holders
  • 5" PSA, Multi-hole/Mesh
  • 1" wide Double-Coated Film
  • 10" Nylon Filament Wheel
  • 1-1/8" Tube Center Nylox Wheel
  • 170 mm Metal Foil Tapes
  • 9/16" Power Tube Brushes
  • 1/2" Nylon Abr Tube Brushes
  • 7/8" x 4-1/2" Hook Sheets
  • 3-1/2" Single Row Knot Cup Br
  • 3/16" Hand Tube Brush
  • B Shape Non-Woven Mounted Pt
  • 6" T-1 Grinding/Bench Wheels
  • A Shape Mounted Points
  • 3/4" Banded Crimped End Brush
  • 1" & Smaller Unitized Wheels
  • 3" Tube Center Wire Wheels
  • 4-1/2" Knot Bevel Wheels
  • 3 x 24 Coated Belts
  • 5" Non-Woven Flap Disc
  • 1" dia Half Taper Cart. Rolls
  • 6" A/O GP Bench Wheels
  • 3/4" dia Cartridge Rolls
  • 8" Hook Discs (no holes)
  • 1/2 x 42 Coated Belts
  • T-27 Depress Center Cut-off Wh
  • Maintenance - Cleaning Brushes
  • 1-1/8" Foil Tapes
  • 1/16" Bulk Adh Transfer Tapes
  • Non-Woven Flap Brushes
  • 4" Stem Mounted Wire Wheels
  • 9" & larger x 7/8 Fiber Discs
  • 5" x 5/8-11 Fiber Discs
  • 2" PSA Coated Abr Discs
  • 1/8 x 20-1/2 Coated Belts
  • 3" Flap Wheels
  • Walter Pipefitter Grinding Whe
  • Walter T-27 ZIP Wheel Cut-Off
  • Wide Belts, Misc Sizes
  • 3/8" Power Tube Brushes
  • 8" Discs, PSA, 6 dust holes
  • 3" Mini Flap Discs
  • 11" Hook Multi-hole/Mesh Discs
  • 6 x 80 Coated Belts
  • 3" T-27 Cut-off Wheels
  • Non-woven File Belts
  • 5" 60 grit Fiber Discs
  • 4 x 24 Non-Woven Belts
  • 4-1/2"x7/8 Fiber Discs
  • 7" Non-Woven Flap Discs
  • 6 x 275 Coated Belts
  • 6" PSA Disc Pad, no dust hole
  • 2" Bulk Adh Transfer Tapes
  • 5" T-27 Cotton Fiber Wheels
  • 8" Hook Multi-hole/Mesh Discs
  • 10" Buff & Polich Wheels
  • 5-1/2" x 9" Plain-Back Sheets
  • Abrasive Sheets, Hook/Loop
  • 5" Hook Discs, 8 dust holes
  • 1-1/2" Spiral Bands
  • 3" Hook Coated Abr Discs
  • 3" Bristle Discs
  • 6" Non-Woven Hook & Loop Disc
  • 12" x 12" Micromesh Cushioned Abrasive Sheets
  • Gum Abrasive Wheels
  • 2" / 48mm Tan Packaging Tape
  • 5" T-29 Angled Flap Discs
  • 7" x 3/8" Grinding Wheels
  • 1-1/2" Tube Center Wire Wheels
  • 3/4" wide Single Coated Foam
  • 7" Crimped Wire Wheels
  • Walter Cutting
  • 6" Non-Woven Hook & Loop Disc
  • Surfox 103 Accessories
  • 3" Tube Center Nylox Wheel
  • Non-Woven Blocks
  • #471 Vinyl Tapes
  • 1/2"" x 6"" Plain-Back Sheets
  • Deburring & Finishing Wheels
  • 2" Hook Coated Abr Discs
  • VersaFlo Headgear, Soft/Full
  • 6" Hook Coated Abr Discs
  • 3" Felt Polishing Flap Wheels
  • Stationary Belts, Carborundum
  • 4" Plater's Wire Wheels
  • 1-1/8" Nylon Abr Tube Brushes
  • Type-R Non-Woven QC Discs
  • 1 x 36 Coated Belts
  • #4726 Vinyl Tapes
  • 3M 3 in Finesse-It Buff & Poli
  • 10" Grinding/Bench Wheels
  • 6" Hook Coated Abr Discs
  • 6" Hook Discs, 9 dust holes
  • 1-3/4" Mounted Cup Brush
  • 1" Encap Crimped End Brush
  • #4412 Extreme Sealing Tape
  • 1-1/4" Rectangular Tube Brush
  • 2" Mini Flap Discs
  • 1/4 x 12 Coated Belts
  • 4" Crimped Wire Cup Brush
  • 4-1/2" Non-Woven Flap Disc
  • 1/4 x 18 Non-Woven Belts
  • Disposable Gloves
  • 1-1/2 x 30 Non-Woven Belts
  • 5" x 4" Flap Wheels, Non-Wov
  • Accessories & Misc
  • 3/8" dia Full-Taper Cart. Roll
  • Single Row Knot Cup Brush
  • 6" Fiber Disc Back-up Pads
  • 2" Type-S T2 Quick-Chg Discs
  • Hot & Cold Products
  • 4+" Foil Tapes
  • Type-M Quick Change
  • 4" Double-Row Combi Cup Brush
  • 4-1/2" T-1 Cut-off Wheels
  • 2"d Flap Wheel Brush
  • 1/4 x 12 Non-Woven Belts
  • Type-M Quick Change
  • 1-1/4" Rectangular Tube Brush
  • 3/8" Nylon Abr Tube Brushes
  • 2-1/2" Flap Wheels, 1/4" shank
  • 4 x 64 Coated Belts
  • 2" Encap Crimped Wire Wheel
  • 2 x 48 Non-Woven Belts
  • 1" Type-S Quick-Chg Discs
  • 4" Hook Disc Backup Pads
  • 4" T-28 Angled Grind Wheels
  • 1 x 30 Coated Belts
  • 4" x 2" Interleaf Flap Wheels
  • 4" T-27 Cut-off Wheels
  • 8-1/2"" x 11"" Plain-Back Shee
  • 1-1/2" Type-S Quick-Chg Discs
  • 1/8" dia Straight Cart. Rolls
  • 5" Felt Polishing Discs
  • Belts, Coated Abrasive
  • 2-1/2" (60 mm) Crepe Masking
  • 15" and larger PSA Discs
  • 2" Type-S Cotton QC Disc
  • 3/4" Sanding Stars
  • 2" Flap Wheel, 1/4" shank
  • 3" Tube Center Wire Wheels
  • 4-1/2" T-27 Cotton Fiber Wheel
  • Type 17 Cones
  • 1/2" Crimped Wire End Brush
  • 3/8 x 13 Non-Woven Belts
  • Bonded Abrasives, Carborundum
  • Coated Abrasive Flap Wheels
  • 1" dia Straight Cart. Rolls
  • 3" Non-Woven Hook & Loop Disc
  • Discs, Coated Abrasive
  • Tool Accessories
  • 2 x 60 Coated Belts
  • 2-1/2" Tube Center Wire Wheels
  • 11/32" Power Tube Brushes
  • 3/8" Spiral Bands
  • 5/16" Minature Knot Wheel
  • 6" Encap Cup Brushes
  • 9/16" Nylon Abr Tube Brushes
  • Banded Crimped End Brushes
  • Small Scratch Brushes, SS
  • 4" Stem Mounted Wire Wheels
  • 1-1/2 x 24 Coated Belts
  • Antiseptics, Creams, Ointments
  • 5" 60 grit Fiber Discs
  • ARC-27733
  • 4-7/8" Stringer Bead Knot Whls
  • 6 x 89 Coated Belts
  • Standard Twist Knot Wheels
  • 3/4 x 48 Coated Belts
  • Interleaf Flap Discs
  • 25 x 60 Coated Belts
  • 1" Crimped Wire Cup Brushes
  • Wide Belts, Sia
  • 5/8" Nylon Abr Tube Brushes
  • 1/8 x 24 Coated Belts
  • 6" T-1 Cut-off Wheels
  • #3380 Aluminum Foil Tape
  • 1 x 32 Coated Belts
  • 8" x 2" Flap Wheels
  • 4-1/2"x5/8-11 T-27 Cut-off Whl
  • Encapsulated Mini Brushes
  • Cotton-Fiber Abrasives
  • 9" Metal Foil Tapes
  • 9" Hook Discs, 9 dust holes
  • Type-S Quick Change Discs
  • Universal Tool
  • 6" Non-Woven Hook & Loop Disc
  • 4" x 6" Interleaf Flap Wheels
  • 4-1/2x5-1/2 Waterproof Sheets
  • Walter 1/4" T-27 Stainless Gr
  • 3" T-1 Cut-off Wheels
  • 4" Stem Mounted Wire Wheels
  • 6" Discs
  • T-28 Angled Grinding Wheels
  • Medications/Tablets
  • 24" Bulk Adh Transfer Tapes
  • 3/4" dia Straight Cart. Rolls
  • 6" Felt Polishing Flap Wheels
  • 6-1/2" x 2" Flap Wheels
  • 7"x5/8-11 T-27 Cut-off Wheels
  • Drills & Specialty Tools
  • Nylon Filament Products
  • Wheels for Concrete
  • 6" x 5/8"-11 Flap Discs
  • 2" Interleaf Flap Wheels
  • 8" Hook Discs, 8 dust holes
  • Encapsulated Crimped Wheels
  • 6" Encapsulated Crimped Wheel
  • 6" Discs, PSA, no dust holes
  • 4" Knot Wire Wheels
  • 2" Type-S Quick Chg Disc Pads
  • 2" PSA Disc Backup Pads
  • 1 x 12 Coated Belts
  • 8" Deburring Wheels
  • 14" Bench Mount Grinding Wheel
  • 2 x 90 Coated Belts
  • Points, Rubber Abrasive
  • Clear Packaging Tapes, x Width
  • 5" Discs, PSA, 5 dust holes
  • 1-1/2" Tube Center Wire Wheels
  • T-29 Grinding Wheels
  • Cement Brushes
  • 3" Circular Flared End Brush
  • 1-3/16 x 24 Non-Woven Belts
  • 63 x 103 Coated Belts
  • 1-1/2 x 60 Non-Woven Belts
  • 6 x 426 Coated Belts
  • 1-1/2 x 144 Coated Belts
  • 1/8" sh Vitrified Mtd Points
  • 5" Discs, PSA, no dust holes
  • 1-1/2" Type-M Non-Woven QC Dis
  • 3" Flap Wheels, 1/4-20 QC
  • 1-1/4" Power Tube Brush
  • 4 x 90 Non-Woven Belts
  • 2" Type-R Quick-Chg Discs
  • 9" T-1 Cut-off Wheels
  • 5" Diamond Wheels
  • #4949 VHB Foam Tape
  • 3 x 132 Coated Belts
  • 3/4" Type-S Quick Chg Disc
  • #4950 VHB Foam Tape
  • Expander Wheels, Slotted
  • 6" General Purpose Wheels
  • 6" & wider Adh. Transfer Tapes
  • 1 x 24 Non-Woven Belts
  • 1-3/4" .006 CS 1/4" Sh E3 Enca
  • 43 x 60 Coated Belts
  • Rolls, Non-Woven
  • Backup Pads, Fiber Discs
  • 9"x7/8" T-29 Grinding Wheels
  • 4-1/2" Non-Woven Quick Chg
  • 9"x5/8-11 T-29 Grinding Wheels
  • Wire Products
  • Teardrop Sheets
  • 25 x 60 Coated Belts
  • 4" Crimped Wire Wheels
  • 6" Backup Pads, Metric mount
  • 4" x 1/4" Grinding Wheels
  • 1/8 x 12 Coated Belts
  • 2" Knot Wire End Brush
  • 6" Discs, PSA, no dust holes
  • 6" Non-Woven Spindle Mount
  • Wheel and Disc Mandrels
  • Oval Sash Brush
  • Curved Handle Scratch Brushes
  • 12" Safety Walk Traction Tape
  • 4 x 60 Coated Belts
  • 3/8 x 21 Non-Woven Belts
  • 5" x 7/8 T-27 Grinding Wheels
  • 5" Hook Discs, 9 dust holes
  • File Belts
  • 6" SiC Green Bench Wheels
  • 7" Finishing Discs
  • Sheets
  • 5" Hook Discs, 5 dust holes
  • Sanitary Brushes
  • 5/8" dia Full-Taper Cart. Roll
  • 1 x 30 Non-Woven Belts
  • 7" 100 grit Fiber Discs
  • 3" (72mm) Masking Tapes
  • 1" wide Sngl-Coated Film Tapes
  • 10" Stringer Bead Knot Wheels
  • Galvanizing
  • 9" T-27 Cut-off Wheels
  • 3/4" Type-S Quick Chg Disc
  • 1-1/8" Banded Crimped End Brus
  • 15" and larger PSA Discs
  • 6" x 7/8 Flap Discs
  • 2-1/2" T-1 Cut-off Wheels
  • 3 x 21 Coated Belts
  • 6"x7/8" T-1 Cut-off Wheels
  • 6"x5/8-11 T-27 Cut-off Wheels
  • 9.5" Bulk Adh Transfer Tapes
  • 14" PSA Coated Abr Discs
  • 10" Stringer Bead Knot Wheels
  • 1-1/2 x 32 Non-Woven Belts
  • 12" A/O Bench Grinding Wheels
  • 5-1/2" x 6.8" Hook Sheets
  • 15" Standard Twist Knot Wheels
  • Grinding Wheel Bushings
  • Backup Pads, Hook & Loop
  • 4" Interleaf Flap Wheels
  • 3" Spiral Bands
  • Discs, Non-Woven
  • 6" Hook Discs, 8 dust holes
  • Hook Disc Holders
  • 12" Deburring Wheel
  • 1" Tube Center Wire Wheels
  • 7"x7/8 T-28 Angled Wheels
  • 3" Flap Wheels
  • 11" Discs, Foam-backed
  • 2" Felt Polishing Flap Wheels
  • 1-1/2" Type-M Quick-Chg Discs
  • 1/4" Minature Knot Wheel
  • 3" T-27 Grinding Wheels
  • Cutting Lubricants
  • Wheels
  • 1" Metal Foil Tapes
  • Interface & Saver Pads
  • Diamond Abr Mounted Points
  • 2" / 48mm Clear Packaging Tap
  • 3" Knot Wire Wheels
  • Bio-Circle 300 Compact Accy
  • 3M 5-1/4 in Finesse-It Buff &
  • E-Weld Plasma
  • #9740 Polyester Film Dbl Sided
  • 3/8" dia Half Taper Cart. Roll
  • 1/2" Banded Crimped End Brush
  • 4-1/2" Hook Discs, 9 dust hole
  • Hand Pads, Non-Woven
  • 9"x7/8" T-1 Cut-off Wheels
  • Bevel Cup Brushes
  • 3/8" dia Straight Cart. Rolls
  • 4"x7/8 Fiber Discs
  • T-27 D/C Grinding Wheels
  • 1" Type-M Non-Woven QC Disc
  • Wide Non-Woven Belts
  • 8" x 1/4" AH Non-Woven Discs
  • 8" Interleaf Flap Wheels
  • 9" Non-Woven Rolls
  • 1/4" x 6" PSA Coated Sheets
  • 43 x 75 Coated Belts
  • 1 x 42 Coated Belts
  • T-27 Depress Center Cut-off Wh
  • 5/8" Rectangular Tube Brush
  • 2-3/4" x 16-1/2" Plain Sheets
  • Sanding Screen Discs
  • 8 x 70 Coated Belts
  • Rolls, Mesh/Screen Abrasive
  • 3" Plain-Back Discs
  • 1" Banded Crimped End Brush
  • 6" Felt Wheels
  • 16" Diamond Wheels
  • Walter ZIP Wheel Cut-Off Wheel
  • 9" & larger Fiber Discs
  • 4-1/2" T-29 Grinding Wheels
  • Encapsulated Wire Wheels
  • 5" 120 grit Fiber Discs
  • 3-1/2" PSA Coated Abr Discs
  • 3/4" dia Full-Taper Cart. Roll
  • 25 x 48 Non-Woven Belts
  • 8" Nylon Wheels
  • 3" Type-R Non-Woven QC Disc
  • 5" Diamond Wheels
  • 1 x 32 Coated Belts
  • 1-1/8 x 52-1/2 Coated Belts
  • Walter T-27 ZIP Aluminum Cut-O
  • Steel Wool Rolls
  • 2" Type-S Cotton QC Disc
  • 9" T-28 Angled Grind Wheels
  • 5/16" Hand Tube Brush
  • 3/4" Type-R Non-Woven QC Disc
  • 1-5/8" Flap Wheel, 1/4-20 Q.C
  • 3/4" Type-M Quick-Chg Discs
  • 1-1/2" ATG Adh Transfer Tapes
  • 6" DF-8 Hook Discs, Blue
  • 5" PSA Disc Backup Pads
  • 2" Nylox Wheel
  • 7" T-1 Grinding/Bench Wheels
  • Mounted Points, 1/8" shank
  • 15/16" 80 .040 SiC - M-Brad Po
  • 12" Low HP Chop Saw Wheels
  • 12" Plain-Back Discs
  • 3" .040 SiC - 120 1/2" A.H., M
  • 4-1/2" x 7/8 Flap Discs
  • 4 x 106 Coated Belts
  • 6" T-27 Grinding Wheels
  • 9"&larger x 5/8-11 Fiber Discs
  • A-Shape Vitrified, 1/4" Sh
  • 2-3/4" x 17-1/2" Plain Sheets
  • Air Force Refillable Sprayer S
  • 3/8" dia Straight Cart. Rolls
  • Squeeges
  • Type-S Quick Change Discs
  • 3/8 x 13 Non-Woven Belts
  • 3/16" Bulk Adh Transfer Tapes
  • 1" Type-R Non-Woven QC Disc
  • 1" Type-R Cotton Chg Disc
  • AF-Weld Anit-Spatter Systems
  • 3" PSA Disc Backup Pads
  • 12" Vitrified Bench Wheels
  • Cut-off Wheels
  • 1" PSA Discs (and smaller)
  • 2" Crimp Wire Cup Brush
  • 2" Spiral Bands
  • Controlled Flare End Brushes
  • 6 x 103 Coated Belts
  • 15/16" Encapsulated Tube Brush
  • 5" Discs, PSA, 8 dust holes
  • 3M 5 in Finesse-It Buff Pad
  • 2" Roloc Unitized Wheels
  • 2-1/2 x 18-15/16 Diamond Belts
  • 4-1/2" T-27 MTX Cotton Wheels
  • 7"x5/8-11 Cut-off Wheels
  • 3/4" / 18mm Packaging Tapes
  • 3/8" dia Full-Taper Cart. Roll
  • Specialty / Misc Items
  • 1/8" dia Cartridge Rolls
  • 3/4 x 20-1/2 Coated Belts
  • #2090 Blue Painter's Mask
  • 6 x 168 Coated Belts
  • Interface & Saver Pads
  • Sheets, Plain-Backed
  • 3/4" Power Tube Brush
  • 3" Flap Wheels
  • 5" x 5/8-11 Fiber Discs
  • Type-M Non-Woven QC Discs
  • Walter 4" T-1 ZIP Cut-Off Whe
  • Crimped Wire End Brushes
  • 3" Type-S Cotton Chg Disc
  • 1" Knot Wire End Brush
  • 4" x 2" Flap Wheels
  • WEN-996197
  • 3" 3/8"ch T-27 Cut-off Wheel
  • 7" T-1 Cut-off Wheels
  • #4412 Extreme Sealing Tape
  • 11-1/4" Finishing Discs
  • 2-7/8" Cut-off Wheels
  • Antiseptics, Creams, Ointments
  • 1/2 x 24 Coated Belts
  • 1-1/2" Flap Wheels
  • Type 18 R Plugs (Rounded)
  • 5/8" Spiral Bands
  • Diamond/SuperAbr Belts
  • 14" Portable/Gas Saw Wheels
  • 5" 60 grit Fiber Discs
  • 4-1/2" Flap Discs, Carborundum
  • 6 x 48 Coated Belts
  • 5" 80 grit Fiber Discs
  • 8" x 1" Flap Wheels
  • Metal Adapters
  • 10+" Bulk Adh Transfer Tapes
  • 2" Coated Abrasive Rolls
  • Maintenance Brushes
  • 1-1/2" Spiral Bands
  • 5" 36 grit Fiber Discs
  • 1/2 x 30 Coated Belts
  • 2-3/4" Plain-Back Rolls
  • 9" T-27 Cut-off Wheels
  • 3 x 132 Coated Belts
  • 18" T-1 Cut-off Wheels
  • Adh Transfer Tapes x Width
  • 3/8" Foil Tapes
  • 1-1/2" Nylon Wheels
  • 4" T-27 Cotton Fiber Wheels
  • 8" A/O Bench Grinding Wheels
  • 7" Non-Woven Flap Discs
  • 5" x 7/8 T-27 Cut-off Wheels
  • 4 x 84 Coated Belts
  • Brown (Stainless Steel)
  • Hook Non-Woven Discs
  • 4-1/2" x 5-1/2" Plain Sheets
  • 8" Hook Disc Pad, no dust hole
  • 1/8" Vinyl / Plastic Tapes
  • 6" Encap Crimped Wire Wheel
  • Walter T-1 ZIP+ Cut-Off Wheels
  • 3" Spiral Bands
  • 5" 100 grit Fiber Discs
  • Clear Packaging Tapes
  • Walter 1/8" T-27 Stainless Sp
  • Stationary Belts
  • 3/4" Type-S Quick Chg Dis
  • 5" T-1 GFX Cotton Fiber Wheel
  • Cartridge Rolls
  • Buckets & Mops
  • 24" Non-Woven Rolls
  • 8" Bench Mount Grinding Wheels
  • 1-1/2" Coated Abrasive Rolls
  • 6" x 2" Non-Woven Flap Brushes
  • 10" Metal/Mult Finishing Wheel
  • 3/8" Spiral Bands
  • Walter Railcut II Cut-Off Whee
  • 4 x 59 Coated Belts
  • 1-1/2" Coated Abrasive Rolls
  • 10" dia & larger Flap Wheels
  • 4 x 36 Coated Belts
  • Small Belts, Arc Abrasives
  • 12" Light Finishing Whels
  • 4 x 21 Coated Belts
  • 6 x 168 Coated Belts
  • 1/4" wide Single Coated Foam
  • 8" x 1/2"ch Finishing Discs
  • 4" Circular Flared End Brush
  • 3/4 x 275 Coated Belts
  • #33316 Copper Conductive Tape
  • 11" Bulk Adh Transfer Tapes
  • 3" Hook Coated Abr Discs
  • Small Non-Woven File Belts
  • Weiler Knot Wire Cup Brushes -
  • Gray VHB Foam Tapes
  • 5" Non-Woven Hook & Loop Disc
  • 1/2 x 60 Coated Belts
  • 5" x 7/8 T-27 Grinding Wheels
  • 7" T-1 Grinding/Bench Wheels
  • Accessories
  • 1-1/2" Type-S Non-Woven QC Dis
  • 36 x 60 Non-Woven Belts
  • Coated Abrasive Rolls
  • 11" Hook Discs (no holes)
  • Wide Belts, Misc Sizes
  • 3/4" dia Cartridge Rolls
  • 1/4 x 132 Coated Belts
  • 3" PSA Disc Backup Pads
  • L shape Abrasive Caps
  • 1-1/2" Flap Wheels
  • Glue Brushes
  • 3" Plater's Wire Wheels
  • 6" T-1 Cut-off Wheels
  • 6-7/8" Stringer Bead Knot Whls
  • 22" Metal Foil Tapes
  • Sanding Brush Segments
  • Walter 1/8" ALU Grinding Whee
  • 6" Discs, PSA, no dust holes
  • 3" Unitized Wheels
  • 2" x 2" Non-Woven Brushes
  • Cup Wheels
  • 3" x 1/2 Snagging Wheels
  • 5" Back-up Pads
  • 1/4" Minature End Brushes
  • 4 x 36 Coated Belts
  • 1/2 x 12 Coated Belts
  • 1" wide Single Coated Foam
  • Knot-Twisted Wire Wheels
  • 3/4" Flap Wheels
  • Sach Brushes, Flat
  • 2" T-1 Cut-off Wheels
  • Type 18R Plugs (Rounded)
  • Cones, Plugs, Mounted Points
  • Abrasive Rolls, Adhesive Back
  • 4-1/2"x5/8-11 T-29 Grind Wheel
  • SS Shoe Handle Scratch Brush
  • 1-3/8" Flap Wheels
  • 3/4" Type-R Non-Woven QC Disc
  • 1-1/2" Vinyl / Plastic Tapes
  • 7/8" Nylon Abr Tube Brushes
  • 6 x 132 Coated Belts
  • 5" PSA Disc Pad, 8 dust holes
  • Shape "D", 1/4" Shank Burs
  • 9" T-28 Angled Grind Wheels
  • 4-1/2" Non-Woven Hook Discs
  • 1-1/8" Rectangular Tube Brush
  • 2" Type-R Non-Woven QC Disc
  • 4-1/2" T-1 Cotton Fiber Discs
  • CS Curved Handle Scratch Brush
  • 8" Nylox Disc (Cup) Brush
  • 3-2/3" x 9" Paper Sheets
  • 5" Nylox Disc (Cup) Brush
  • Walter Standard Flap Discs
  • Resin Bond, 1/8" Shank
  • 8" Concrete Cut-off Wheels
  • 5" Non-Woven Flap Discs
  • Nylox Bore-Rx Brushes
  • Versaflo Speedglas
  • 1/2 x 20-1/2 Coated Belts
  • 1 x 36 Coated Belts
  • 6 x 89 Coated Belts
  • Type-S Non-Woven QC Discs
  • 4" General Purpose Wheels
  • 5" Hook Discs, 9 dust holes
  • 6 x 48 Coated Belts
  • 2 x 72 Coated Belts
  • 2-1/4" Power Tube Brushes
  • 3 x 24 Coated Belts
  • Specialty Abrasives
  • 1 x 32 Non-Woven Belts
  • Cut-Off Tools
  • 1" dia Straight Cart. Rolls
  • 14" x 1 1/2 Wheels
  • 5/8" wide Vinyl Tapes
  • 1.2 x 26 Non-Woven Belts
  • 2" Type-R Quick-Chg Discs
  • Curve-Edge Flap Discs
  • 1/4" Banded Crimped End Brush
  • #370 Gray Safety Walk
  • Orange (Mild Steel and Cast Ir
  • 1/4" dia Full-Taper Cart. Roll
  • Portable Belts, Misc Sizes
  • 2" Interleaf Flap Disc
  • Encapsulated Wire Wheels
  • 6 x 168 Coated Belts
  • 6" Interleaf Flap Wheels
  • 2" Type-S Quick Chg Disc Pads
  • Stationary Belts, Non-Woven
  • 6" x 7/8 T-27 Cut-off Wheels
  • 3/16" Minature Stem-Mounted
  • Shape "F", 1/8" Shank Burs
  • Walter ALU Grinding Wheels
  • Discs, Coated Abrasive
  • 4-1/2" Fiber Disc Back-up Pads
  • Coated Abrasives
  • 7"x7/8" T-27 Cut-off Wheels
  • 1-1/2" Type-R Quick-Chg Discs
  • 7" T-1 MTX Cotton Fiber Wheels
  • 9"&larger x 5/8-11 Fiber Discs
  • 3/4" Type-S Non-Woven QC Discs
  • Crimped Mounted Wire Wheels
  • Mandrel, Cartridge Roll 1/2x3/
  • CP-83 GP MaskingTape
  • Walter T-28 HP XX Grinding Whe
  • 4-1/2"x7/8" T-29 Grind Wheels
  • Weiler Crimped Wire Cup Brushe
  • 1/4" Vitrified Mounted Points
  • 8" Interleaf Flap Wheels
  • 12" Unitized Wheels
  • Type-S Non-Woven QC Discs
  • #4516 Vinyl Tapes
  • 4" Stringer Bead Knot Wheels
  • 3 x 10-11/16 Coated Belts
  • Bandages
  • Flap Wheel Cup Brushes
  • File Board Abrasive Sheets
  • 1" (24mm) Foil Tapes
  • 3" Type-R Quick-Chg Discs
  • ATG Transfer Tapes x Code
  • T-1 Cotton Bond Cut-Off Wheels
  • Double-Slant Profile Sponges
  • Small Type-S Quick Chg Pads
  • 1/4 x 20-1/2 Non-Woven Belts
  • Walter Blendex Unitized Finish
  • 1/4" dia Straight Cart. Rolls
  • Sheets, Micro-Mesh MX
  • 26" T-1 Cut-off Wheels
  • 3/4" Bulk Adh Transfer Tapes
  • Gum Abrasive Products
  • 3/8" Power Tube Brushes
  • A Shape Non-Woven Mounted Pt
  • Discs, 5" Surface Conditioning
  • 9" x 11" Cloth Sheets
  • 4-1/2" T-27 Flap Discs
  • 3" T-1 Cotton Grind Wheel
  • 1" Coated Abrasive Rolls
  • 3/16" dia Full-Taper Cart. Rol
  • 8" Metal Finishing Wheels
  • 5" x 5/8-11 T-27 Cut-off Whl
  • 4 x 54 Coated Belts
  • 3" T-1 Cut-off Wheels
  • Shape "A", 1/8" Shank Burs
  • 1/2 x 24 Non-Woven Belts
  • Foam-Back Abrasives
  • 9" PSA Coated Abr Discs
  • 1-1/8 x 21 Coated Belts
  • Ovation Attacker Flap Discs
  • 2" T-1 Cotton Grind Wheel
  • 4 x 60 Non-Woven Belts
  • #9741 Dbl Sided Polyester Film
  • Repair Parts
  • Wide Belts, SiaCapco
  • 6" Wheels
  • 6 x 80 Coated Belts
  • 4" Knot Bevel Cup Brush
  • Shape "B", 1/8" Shank Burs
  • Quick-Change (Spin-on) Discs
  • 8" x 1/2"ch Finishing Discs
  • 5/8" Miniature Stem-Mounted
  • 12" Unitized Wheels
  • 12" Clean & Strip Wheels
  • 6"x5/8-11 T-27 Grinding Wheels
  • 1/8" dia Half Taper Cart. Roll
  • 2 x 118 Coated Belts
  • 4-1/2" Flap Discs, Sia
  • 3" Mini Flap Discs
  • 3" Type-S Non-Woven QC Discs
  • 3/8" dia Half Taper Cart. Roll
  • Walter Quick-Step FX Discs
  • 4-1/2"x5/8-11 Fiber Discs
  • 6" Double-Row Knot Wire Cup Br
  • 3" Hook Disc Backup Pads
  • 1-1/2" Type-R Non-Woven QC Dis
  • 3" Unitized Wheels
  • 4-1/2" Metric Hub Wheels
  • 1/2 x 44 Coated Belts
  • 8" Concrete Cut-off Wheels
  • 8" PSA Coated Abr Discs
  • 3 x 72 Coated Belts
  • 3/4" Type-R Non-Woven QC Disc
  • Discs, 5" Surface Conditioning
  • 5-1/2" x 9" Plain-Back Sheets
  • GVS Filtration Products
  • 2 x 36 Non-Woven Belts
  • 1/2"" Tapered Spiral Band
  • 5" Quick-Change Fiber Discs
  • 5" 36 grit Fiber Discs
  • 6 x 48 Coated Belts
  • 1" Type-R Quick-Chg Discs
  • 4" Fiber Discs
  • 6" Standard Twist Knot Wheels
  • Encap ualted Cup Brushes
  • Portable/Gas Saw Wheels
  • 1" wide VHB Foam Tapes
  • Refillable Trigger Sprayers
  • 5/8" dia Full-Taper Cart. Roll
  • 3" Clean & Strip Discs
  • 10" x 3/4" Grinding Wheels
  • Festool 9" Saphir H&L Discs
  • 6" T-1 Cut-off Wheels
  • 3" Encap Crimped Wire Wheel
  • 6" Flap Wheels
  • Foam-Back Abrasive Discs
  • 10" x 1/2" High Strength Discs
  • 4" Non-Woven Hook & Loop Disc
  • 12" SiC Green Bench Wheels
  • 3" Type-S Cotton Chg Disc
  • Crimped Mounted Wire Wheels
  • 4-1/2" Unitized R/A Discs
  • 8" Bench Mount Grinding Wheels
  • #893 Industrial Filament Tape
  • 7-2/3" Metal Foil Tapes
  • CP-83 GP MaskingTape
  • 3/4 x 125 Coated Belts
  • 1" Type-M Non-Woven QC Disc
  • 1" / 24mm Masking Tapes
  • 3" Knot Wire Wheels
  • 4" / 96mm Masking Tapes
  • 3" Unitized Wheels
  • 1 x 21 Coated Belts
  • 7" x 5/8-11 Flap Discs
  • 3" 3/8"ch T-1 Cut-off Wheels
  • 1-1/2" Flap Wheels, 1/4" shank
  • 1-1/2" Type-M Non-Woven QC Dis
  • 3" Metal Foil Tapes
  • 4 x 84 Non-Woven Belts
  • 6-5/8" Metal Foil Tapes
  • 1-1/2" Type-R Quick-Chg Discs
  • SS Contaminant-Free Wheels
  • CP-107 Industrial Crepe Tape
  • Backup Pad, 3x1/4 shk Hook
  • 3/4" Knot Wire End Brush
  • 93 mm Festool DX93 Sheets
  • 4 x 54 Coated Belts
  • Plain Back Rolls
  • Grinding Wheels, T-27
  • Stationary Cushioned Abrasive Belts, MicroSurface
  • #1430 Aluminum Foil Tape
  • Abrasive Caps
  • 6 x 274 Coated Belts
  • 3/4" Rectangular Tube Brush
  • 6" Discs, PSA, 8 dust holes
  • 4-1/2" Trim-Kut Discs
  • 2 x 36 Coated Belts
  • 6" Hook Discs, 6 dust holes
  • 6" Finishing Discs
  • 9"x5/8-11 T-27 Grinding Wheels
  • 6" Non-Woven Hook & Loop Disc
  • Quick Change (Spin-On) Discs
  • 8" x 1" Grinding Wheels
  • 2-1/2" Non-Woven Bands
  • 12" & wider VHB Foam Tapes
  • 15" and larger PSA Discs
  • Back-up Pads, Quick-change
  • Pressboard Adapters
  • 3" Non-Woven Rolls
  • Walter Xcavator Grinding Wheel
  • 4-1/2" T-27 Grinding Wheels
  • 3/4 x 24 Coated Belts
  • 5/8" Nylon Abr Tube Brushes
  • 3" Square Pads
  • 4" Clean & Strip Wheels
  • 14" Metal Foil Tapes
  • Raptor 1/2" Crown Staples, Standard
  • 1/2" Double-Coated Paper Tape
  • 3" .008 CS 1/4" Sh E3 Encapsul
  • 2-3/8" Interleaf Flap Wheel
  • 2-3/4" Single Row Knot Cup Br
  • 6 x 274 Coated Belts
  • 9x11 Waterproof Sheets
  • 5" 50 grit Fiber Discs
  • 6 x 108 Coated Belts
  • 4" Cut & Polish Wheels
  • 8" MX & Metalworking Wheels
  • Nylox Cup Brushes
  • Discs, Quick Change Type-S
  • 7" x 1/32" Cut-off Wheels
  • 5" NW Disc Holders
  • 1-3/4 Nylox End Brush (Disc)
  • 3" Unitized Wheels
  • 1" Type-R Non-Woven QC Disc
  • Spiral (No-Lap) Bands
  • 2 x 48 Coated Belts
  • 610 mm Metal Foil Tapes
  • 5" Combi-Twist Knot Cup Brush
  • 3" Non-Woven Hook & Loop Disc
  • 1-1/2" Mtd Flared Brushes
  • 8" 80 Rectangular Filament, Si
  • 1 x 90 Coated Belts
  • 12" PSA Coated Abr Discs
  • 3" Type-S Quick-Chg Discs
  • Flap Discs, Sia
  • 2" Interleaf Flap Wheels
  • 1-1/4" 80 .040 SiC - M-Brad Po
  • 3" Flap Brushes
  • 3-3/8" Bulk Adh Transfer Tapes
  • Stringer Bead Wire Wheels
  • 4"x7/8 Fiber Discs
  • 165 mm Metal Foil Tapes
  • 5" T-27 Cut-off Wheels
  • Type 17 Cones
  • 3-2/3" x 9" Plain-Back Sheets
  • 3" T-1 Cut-off Wheels
  • First Aid Kits, Portable
  • VersaFlo M-100 Series Parts
  • Norton Back-up Pads
  • 6" Hook Discs (no holes)
  • 1/2" Power Tube Brushes
  • 3" Power Tube Brushes
  • PSA Backed Sanding Discs
  • Stationary Belts, Non-Woven
  • 3/4" Minature Stem-Mounted
  • 1-1/2" Type-S Quick-Chg Discs
  • 10" A/O Bench Grinding Wheels
  • 14" T-1 Cut-off Wheels
  • Back-up Pads, Disc & Sheet
  • 62 x 103 Coated Belts
  • 10" PSA Coated Abr Discs
  • 37 x 75 Non-Woven Belts
  • 3" Finishing Flap Wheels
  • 4-1/2" 120 grit Fiber Discs
  • 1/2" (12mm) Masking Tapes
  • Non-Woven Disc Holders
  • 3/8" Full Taper Cart Roll
  • 30" Metal Foil Tapes
  • 1-1/2" Flap Wheel, 1/4-20 Q.C.
  • 4-1/2" T-29 Flap Discs
  • CS Curved Handle Scratch Brush
  • 3/4" Spiral Bands
  • 5" Hook Disc Pad, 9 dust holes
  • 4" Type-S Non-Woven QC Discs
  • 6"/144mm Tan Packaging Tape
  • High Strength Discs
  • 1-1/2" Felt Flap Wheels
  • 2" wide Single Coated Foam
  • 6" Flap Wheels
  • 3" x 2" Non-Woven Brushes
  • 1/4" Rectangular Tube Brush
  • 10" T-1 Stationary Wheels
  • Tallow Greas Sticks
  • Festool 7-1/4" H&L DF Sanding Discs
  • 3/16" Hand Tube Brush
  • 4 x 60 Coated Belts
  • 3-2/3x7 Non-Woven Sheets
  • 6" Hook Pad, Multi-hole / Mesh
  • Bio-Circle 200 Accessories
  • VersaFlo Headgear
  • COL-100 Colonial Masking Tape
  • 1" Finishing Flap Wheels
  • 4 x 104 Coated Belts
  • 1-1/2" Flap Wheels
  • 2-3/4" x 17-1/2" Plain Sheets
  • Cartridge Rolls
  • 2" Coated Abrasive Rolls
  • Eye Care
  • 9"x5/8-11 T-1 Cut-off Wheels
  • 3" Type-R Non-Woven QC Disc
  • 5" T-28 Angled Grind Wheels
  • 4" Encapsulated Knot Wheels
  • 3M 982CX Pro Cubitron II Fiber Discs
  • 37 x 60 Coated Belts
  • Foam-Back Abrasives
  • 1-1/2" Minature Wheels
  • 4" .040 SiC 80 Round Filament,
  • 3" Finishing Flap Wheels
  • 5" Discs, PSA, no dust holes
  • 2" Power Tube Brush
  • 8" Nylox Disc (Cup) Brush
  • 5" x 5/8-11 Flap Discs
  • 14" Portable/Gas Saw Wheels
  • Felt Polishing Wheels
  • 9" T-27 Cut-off Wheels
  • Disposable Gloves, Cotton
  • Masony Brushes
  • 2-1/2" Knot Wire Wheels
  • 7" T-1 Cotton Bond Cut-Off Wh
  • 5" Discs, Foam-backed
  • 6" x 4" Non-Woven Flap Brushes
  • Type-M Non-Woven QC Discs
  • Hook Non-Woven Discs
  • 1 x 24 Coated Belts
  • Block Sponges, Norton
  • Standard Sponges
  • 1-1/2" Encapsulated Crimped
  • 1/16" dia Full-Taper Cart. Rol
  • Belts, Micro-mesh Cushioned Abrasive
  • 11/32" Power Tube Brushes
  • 2" Flap Wheel Cup, 1/4" s
  • #305 Packaging Tape
  • 4-1/2" Non-Woven Hook Discs
  • 5" x 5/8-11 T-1 Cut-off Wheels
  • 7" Diamond Wheels
  • 3 x 21 Non-woven Belts
  • 7" T-1 Cotton Bond Disc
  • 6" Diamond Wheels
  • 5" Non-Woven Hook & Loop Disc
  • Knot Wire Cup Brushes
  • #3367 Aluminum Foil Tape
  • 8" Sisal Fabric Wheels
  • 3" Type-R Non-Woven QC Disc
  • 1/8" Hand Tube Brush
  • T-27 Cotton Fiber Wheels
  • 6" PSA Coated Abr Discs
  • Buckets
  • 5" Finishing Discs
  • 7" T-29 Grinding Wheels
  • 4" T-27 Cut-off Wheels
  • 5" 80 grit Fiber Discs
  • 6" MX & Metalworking Wheels
  • 6" x 12" Micromesh Cushioned Abrasive Sheets
  • E-Weld Pre/Post Weld Treatment
  • 6" Discs, PSA, no dust holes
  • 2" PSA Coated Abr Discs
  • 4" Non-Woven Flap Brushes
  • Abrasive Sheets, Hook/Loop
  • 7" 120 grit Fiber Discs
  • 3/4" Type-R Quick Chg Dis
  • 1" Sanding Stars
  • Type-S Non-Woven QC Discs
  • 4-1/2" x 5-1/2" Paper Sheets
  • 1" Circular Flared End Brush
  • 9 x 48 Coated Belts
  • 2 x 78 Non-Woven Belts
  • 12" PSA Coated Abr Discs
  • 3" wide Single Coated Foam
  • Backup Pads, Type-R (screw)
  • T-29 Grinding Wheels
  • 12" Metal Finishing Wheels
  • 11" Hook Discs (no holes)
  • 2-1/2" Knot Wire Wheels
  • 3" Hook Multi-hole/Mesh Discs
  • 1/4" dia. Power Tube Brush
  • Discs, Non-Woven
  • 3" Type-R Quick-Chg Discs
  • 2 x 15-1/2 Coated Belts
  • Abrasive Sheets, Hook/Loop
  • 1/4 x 24 Coated Belts
  • 1/4" Power Tube Brushes
  • 4" Non-Woven Rolls
  • 2" Encap Crimped Wire Wheel
  • 4" Non-Woven Rolls
  • 5" 60 grit Fiber Discs
  • 6" x 1/2" Flap Wheels
  • Coated Abrasive Belts, Sungold
  • 8" Hook Discs, 8 dust holes
  • 6" x 7/8 T-27 Cut-off Wheels
  • 6" Cushioned Abrasive Discs
  • 3-1/2" Flap Wheels
  • Walter 1/8" HPCombo Grinding
  • 37 x 75 Non-Woven Belts
  • 3" Foam Backed Discs
  • 1" PSA Discs (and smaller)
  • 4-1/2"x7/8 Fiber Discs
  • 1/4" sh Resin Bond Mtd Points
  • 3 x 132 Coated Belts
  • 1-1/2" Crimped Mounted Wheels
  • 4-1/2" Hook Disc Backup Pad
  • 1/4 x 24 Non-Woven Belts
  • 4-1/2" TN 5/8-11 Non-Woven
  • 12" wide Foam Tapes
  • 10" PSA Coated Abr Discs
  • 4 x 48 Coated Belts
  • 6" Felt Polishing Flap Wheels
  • 3-1/2" Hook Non-Woven Discs
  • 2" Type-S Quick Chg Disc Pads
  • 12" Finishing Wheels
  • 3" PSA Coated Abr Discs
  • 1/4" Nylon Abr Tube Brushes
  • 46" Vinyl / Plastic Tapes
  • 3" Discs, Cotton Fiber
  • 14" A/O Bench Grinding Wheels
  • Mounted Knot Wire Wheels
  • 3" Non-Woven Flap Wheels
  • 2" Non-Woven Flap Brushes
  • 43 x 75 Coated Belts
  • 1/2" x 7" PSA Sheets
  • 8" Finishing Discs
  • 6" Foam-Back Discs
  • 1" Banded Crimped End Brush
  • 12" Coated Flap Wheels
  • 7" PSA Coated Abr Discs
  • Cotton Fiber Discs
  • 6" Discs, PSA, 6 dust holes
  • 1/2"" x 6"" PSA Sheets
  • 4-1/2" Coated Abrasive Rolls
  • 12" SiC Green Bench Wheels
  • Straight (T-1) Cut-off Wheels
  • 2" Interleaf Flap Wheels
  • Walter TWIST Quick Change Flap
  • 7" Bench Mount Grinding Wheels
  • Walter 1/8" T-27 Stainless Gr
  • 9" T-29 GFX Cotton Fiber Wheel
  • 1/4 x 24 Coated Belts
  • 3/4 x 18 Non-woven Belts
  • 6" Deburring Wheel
  • 12" and larger Discs
  • 7" x 5/8-11 Flap Discs
  • 2-3/4" x 17-1/2" Plain Sheets
  • 10" General Purpose Discs
  • 3" Interleaf Flap Wheels
  • Discs, Non-Woven Finishing
  • 1/2 x 36 Coated Belts
  • 3" Crimped Wire Cup Brush
  • 400 mm Metal Foil Tapes
  • 4" T-28 Angled Grind Wheels
  • 2" Coated Abrasive Rolls
  • Non-Woven Flap Wheels
  • Accessories & Misc
  • 1/2"" x 7"" PSA Sheets
  • 2" Interleaf Flap Wheel
  • 3 x 132 Non-Woven Belts
  • Mounted Points, 1/8" shank
  • 8" Hook Coated Abr Discs
  • Wheel Brushes
  • Foam-Back Abrasive Discs
  • 6" T-29 Flap Discs
  • 5" x 7/8 Fiber Discs
  • 11/16" Power Tube Brushes
  • 10" Metal Finishing Wheels
  • 18" T-1 Cut-off Wheels
  • 1-1/4" dia Straight Cartridge
  • 1/4" (6mm) Masking Tapes
  • Type-R Quick-Change Discs
  • 7/16" dia Cartridge Rolls
  • 2" Type-M Quick-Chg Discs
  • Dynamit Abrasive Glove
  • 8" Interleaf Flap Wheels
  • 4 x 24 Coated Belts
  • 12" Metal/Mult Finishing Wheel
  • 2" Type-S Non-Woven QC Discs
  • 2-3/4" x 16-1/2" PSA Sheets
  • 1/8 x 12 Coated Belts
  • 1 x 30 Coated Belts
  • 3/4" Minature Wheels
  • 4" .040 SiC - 120 1/2-3/8 A.H.
  • 12" Non-Woven Spindle Mount D
  • 3/4 x 18 Coated Belts
  • Sweep Floor Brushes
  • 4 x 79 Coated Belts
  • #231 Scotch Masking Tape
  • Adh Transfer Tapes x Code
  • 5" x 7/8 T-27 Cut-off Wheels
  • 5" Hook Discs (no holes)
  • 2-3/4" x 3-1/2" PSA Sheets
  • Interleaf Flap Discs
  • VersaFlo Headgear, Soft/Half
  • 2" Coated Abrasive Rolls
  • 6" Hook Disc Pad, no dust hole
  • 1/2 x 34 Coated Belts
  • Type-S Quick Change Discs
  • 3 x 103 Coated Belts
  • Walter 4" Cut-off Wheels
  • 4" Flap Wheels
  • Low HP Chop Saw Wheels
  • 1" Power Tube Brushes
  • 1-3/4" Bulk Adh Transfer Tapes
  • 5" Discs, PSA, no dust holes
  • 6" Finishing Flap Wheel
  • 5" Hook Diamond/SuperAbr Disc
  • A Shape Mounted Points
  • 10" + larger Hook Non-Woven Di
  • 2" wide Slick Surface Tapes
  • 4" Finishing Flap Wheels
  • 8" T-1 Grinding/Bench Wheels
  • 3 x 72 Coated Belts
  • 7"x5/8-11 T-27 Grinding Wheels
  • Paper Back Sheets
  • Cotton Bond Discs
  • Solvent Based
  • 4" T-1 Grinding Wheels
  • 11/16" Nylon Abr Tube Brushes
  • Backup Pads, PSA
  • 6" Plain-Back Discs
  • Belts, Coated Abrasive
  • Dual-Lock Type 250
  • Shoe Handle Scratch Brushes
  • 8" Light Finishing Whels
  • 5" Bridled Cup Brush
  • 2-1/2" Flap Wheels
  • #201+ General Use Masking Tape
  • 3/8 x 18 Non-Woven Belts
  • 2" PSA Coated Abr Discs
  • 37 x 103 Coated Belts
  • 6 x 90 Coated Belts
  • Masking Tapes (by width)
  • 4-1/2" 120 grit Fiber Discs
  • #363LC High Temp Aluminum/Glas
  • 3 x 24 Coated Belts
  • 1-5/8" Flap Wheels
  • Yellow Safety Walk
  • 4-1/2" T-1 Cut-off Wheels
  • 6" Hook Discs (no holes)
  • 3" x 4" PSA Sheets
  • 4 x 132 Non-Woven Belts
  • 8" T-1 Cut-off Wheels
  • 2" Power Tube Brush
  • 12" x 3" Wheels
  • 6" T-29 Flap Discs
  • 5" Finishing Discs
  • Coated Abrasives, Sungold
  • 2" PSA Coated Abr Discs
  • 14" Cable Twist Knot Wheels
  • 1-1/2" Mtd Flared Brushes
  • 5" 100 grit Fiber Discs
  • 3 x 72 Coated Belts
  • 4-1/2" T-27 GFX Cotton Wheels
  • Stem Mounted Brushes
  • 2" Type-R Quick Chg Disc Pads
  • 6" Single Row Knot Cup Brush
  • 6" Flaring Cup Wheels
  • Standard Twist Knot Wheels
  • 36 x 75 Coated Belts
  • Spin-on Disc/Wheel holders
  • 7" Hook Disc Backup Pads
  • TR-600 Series Versaflo PAPRs
  • Diamond Abrasive Rolls
  • Cup Flap Wheels
  • 5" x 7/8 Fiber Discs
  • Interleaf Discs
  • 3" x 4-1/4" PSA Sheets
  • 1/2 x 12 Coated Belts
  • 3/4" Type-R Non-Woven QC Disc
  • #97065 Aluminum Foil Tape
  • Cleaning Brushes
  • Shape "K", 1/8" Shank Burs
  • 5" Paper-Back Hook Discs
  • 1" PSA Discs (and smaller)
  • 3" Non-Woven Spindle Mount Di
  • 4"+ Bulk Adh Transfer Tapes
  • Abrasive Rolls, Adhesive Back
  • 1" dia Full-Taper Cart. Rolls
  • 8" .040 SiC 80 Round Filament,
  • 6 x 48 Coated Belts
  • 3" Interleaf Flap Wheels
  • 5" x 7/8 Flap Discs
  • 1/2" / 12mm Masking Tapes
  • Plastic Bushings & Adapters
  • 6" Discs, PSA, 6 dust holes
  • 4" Non-Woven Rolls
  • Type-S Quick Change Discs
  • 2" Plain-Back Abrasive Rolls
  • 60 mm wide Double-Coated Film
  • 1" Rectangular Tube Brush
  • 1-3/4 Nylox End Brush (Disc)
  • 1/2" x 6" Plain-Back Sheets
  • 5" T-27 Grinding Wheels
  • 5" Clean & Strip Discs
  • Stationary Belts, Misc Sizes
  • Single Coat Tapes, by Code
  • 14" A/O Bench Grinding Wheels
  • Mandrels, Cartridge Roll
  • Weiler Vortec Pro Crimped Wire
  • 1300-**-0103 Components
  • 3-2/3" x 9" Plain-Back Sheets
  • 7" Non-Woven Flap Discs
  • 25 x 60 Coated Belts
  • 7" T-27 Cut-off Wheels
  • 4 x 21 Coated Belts
  • 52 x 75 Coated Belts
  • Coolcut Cloth Rolls
  • 8 x 107 Coated Belts
  • Plain-Back Abrasive Rolls
  • 3" Mtd Flared Brushes
  • Mounted Points, special shank
  • 1/4" Rectangular Tube Brush
  • 2" Mini Flap Discs
  • 8-1/2" x 11" Plain-Back Sheets
  • 3/4" ATG Adh Transfer Tapes
  • 8" .040 SiC - 80 2" A.H., M-Br
  • 2 x 90 Non-Woven Belts
  • 3/4" Flap Wheels, 1/8" Shank
  • Weiler Knot Wire Cup Brushes -
  • 4 x 84 Coated Belts
  • 13/16" Tube Brushes
  • 8 x 20 Perforated Sheet Rolls
  • 9/16" Power Tube Brushes
  • Small Non-Woven Belts
  • Full-Taper Cartridge Rolls
  • 10" A/O Bench Grinding Wheels
  • 1-1/4" Tube Center Wire Wheels
  • 1 x 32 Coated Belts
  • 4 x 36 Coated Belts
  • Spiral (No-Lap) Bands
  • 10" SiC Green Bench Wheels
  • 8" Flannel Buffing Wheels
  • Interleaf Flap Wheels
  • 3-1/2" .040 SiC - 120 5/8-11 T
  • Nylox Wheels
  • 4" Metric Hub Wheels
  • 6" T-29 Flap Discs
  • Knot Bevel Wheels
  • 9" T-27 Grinding Wheels
  • 8" x 1-1/4" Non-Woven Disc
  • 8" Flap Wheels
  • 10" Soft/Untreated Cloth Whee
  • Non-Woven Polishing Stars
  • 6" Unitized Wheels
  • 1" Type-R Quick-Chg Discs
  • 2" Spin-On (R) Non-Woven Disc
  • 4" NW Disc Holders
  • 4-1/2"x5/8-11 Fiber Discs
  • 3" Flap Wheels, 1/4-20 QC
  • Disc Back-up Pads
  • 1/2" x 6" PSA Sheets
  • 8" SiC Green Bench Wheels
  • 2" Flap Wheels
  • 12" A/O Bench Grinding Wheels
  • 7"x7/8 Fiber Discs
  • Tapes by Product Code
  • Brown (Stainless Steel)
  • 2 x 17-3/4 Non-Woven Belts
  • Bio-Circle 600A MAXI Accy
  • 2-1/2 x 60 Coated Belts
  • 4" x 4" Interleaf Flap Wheels
  • 6" Cut & Polish Wheels
  • 3" Crimped Mounted Wire Wheels
  • 4" Non-Woven Flap Brushes
  • Non-Woven Belts
  • 2" Flap Wheel, 1/4" shank
  • 4-1/2"x5/8-11 T-29 Grind Wheel
  • 3" Non-Woven Hook & Loop Disc
  • 1-1/2" Type-M Non-Woven QC Dis
  • 6" Plater's Wire Wheels
  • Square Pads
  • 1 x 36 Coated Belts
  • 2" Interleaf Flap Discs
  • 1-1/4" Minature Wheels
  • 1-3/8" Flap Wheel, 1/4-20 Q.C
  • Walter 2" Sanding Wheels
  • 4-1/2" T-29 Flap Discs
  • 4 x 24 Non-Woven Belts
  • 2" Type-M Quick Chg Disc Pads
  • #8898 Strapping Tape
  • 50 mm Metal Foil Tapes
  • 1-1/2" Type-S Quick-Chg Discs
  • 1" Interleaf Flap Wheel
  • 3/4" Double-Coated Film Tapes
  • 1-3/4" Foil Tapes
  • 1/4" sh B-Shape Mtd Points
  • 4-1/2" T-29 Flap Discs
  • 5" Quick-Change Fiber Discs
  • 4-1/2" T-29 Grinding Wheels
  • Holders, for Flat Brushes
  • 2" Tube Center Nylox Wheel
  • 4-1/2" Unitized R/A Discs
  • 6" x 1/2" Flap Wheels
  • Discs
  • 1-1/2" Non-Woven Abr Rolls
  • 5" T-29 Angled Flap Discs
  • 7" Non-Woven Hook & Loop Disc
  • 1" Type-M Quick-Chg Discs
  • 3/8 x 13 Coated Belts
  • Shape "F", 1/4" Shank Burs
  • Straight (T-1) Cut-off Wheels
  • 3" Hook Multi-hole/Mesh Discs
  • 4" Finishing Discs
  • 7" Fiber Discs
  • 25 x 48 Coated Belts
  • 6" Flap Discs
  • 1-3/4" Power Tube Brushes
  • 3" x 6" PSA Sheets
  • 6" Flap Discs
  • 7" Non-Woven Flap Discs
  • 6" Nylox Wheels
  • Backup Pad, 6x5/8-11 Hook
  • Hook-Back Triangle Sheets
  • 3" Type-S Quick-Chg Discs
  • 6 x 48 Coated Belts
  • Brushes
  • Burrite Brush Holders
  • 5" Discs, PSA, no dust holes
  • 7" Hook Coated Abr Discs
  • 9" .040 SiC 80 Round Filament,
  • 2" Finishing Flap Wheels
  • 1/2" dia Straight Cart. Rolls
  • Walter Air Force AF-Weld
  • 4" Felt Wheels
  • 1/2 x 24 Non-Woven Belts
  • 4-1/2" Plain-back Abr Roll
  • 4" Type-R Quick-Chg Discs
  • Type-S Non-Woven QC Discs
  • Walter T-1 ZIP Wheel Cut-Off W
  • 3" / 72mm Masking Tapes
  • 8" Non-Woven Hook & Loop Disc
  • 3" Interleaf Flap Discs
  • 4 x 21 Coated Belts
  • 5-3/8 x 15-1/2 Coated Belts
  • 4-1/2"x5/8-11 T-29 Grind Wheel
  • Walter 9" Cut-Off Wheels
  • 2-1/2" Encap Crimp Wire Wheel
  • Orange (Mild Steels)
  • Wire Wheel Brushes for Angel G
  • Tampico Wheels
  • 1-1/16"Rectangular Tube Brush
  • 2-1/2" Flap Wheels, 1/4" shank
  • 2-1/2"d Flap Wheel Brush
  • 1/2" wide Foam Tapes
  • Interleaf Flap Wheels
  • Concrete Grinding Wheels
  • 3-2/3" PSA Abrasive Rolls
  • 5/16" dia Half Taper Cart. Rol
  • 3-2/3" x 7" Hook Sheets
  • Chip & Oil Brushes
  • 8" General Purpose Wheels
  • 8" Discs, Foam-backed
  • 5" 50 grit Fiber Discs
  • 1/2" wide Foam Tapes
  • Accessories: Mandrels, Adapter
  • Walter HP XX Grinding Wheels
  • 1/2" dia Cartridge Rolls
  • 4 x 11 Non-Woven Belts
  • 4 x 24 Non-Woven Belts
  • 7" Quick-Change Fiber Discs
  • 4 x 54 Coated Belts
  • 6" Discs, PSA, 8 dust holes
  • Accessories & Misc
  • 2" wide Dbl-Coated Film Tapes
  • 4" Non-Woven Wheels
  • 3" Clean & Strip Wheels
  • Walter 1/8" Pipefitter Grindi
  • 1 x 18 Coated Belts
  • #369 Tartan Box Sealing Tape
  • 7" Cut-off Wheels
  • Walter ZIP Cut-Off Wheels
  • 5-1/2" x 7" Hook Sheets
  • 4" Tube Center Wire Wheels
  • 1 x 18 Coated Belts
  • 12" Cable Twist Knot Wheels
  • 1" Flap Wheels
  • 4-1/2" T-27 Cut-off Wheels
  • 1-1/8" Spiral Bands
  • 4-1/2"x5/8-11 T-27 Grind Wheel
  • 12" x 2" Flap Brushes
  • 3" Type-R Quick-Chg Discs
  • 60 mm wide Double-Coated Film
  • 5/8" Power Tube Brushes
  • Walter Quick-Step Metal Surfac
  • Cotton-Fiber Abrasives
  • Diamond Cutting Wheels
  • 15/16" Nylon Abr Tube Brushes
  • 3" Non-Woven Abrasive Bands
  • 4" Flap Wheels
  • Walter 6" Cut-Off Wheels
  • Internal Grinding Wheels
  • Walter 5/32" Pipefitter Grind
  • Finishing Flap Wheels
  • 6" Hook Discs (no holes)
  • Portable Belts, Misc Sizes
  • 1" Type-S Non-Woven QC Discs
  • 7" T-27 Cotton Fiber Wheels
  • 12" Standard Twist Knot Wheels
  • 3/4" Flap Wheels
  • Discs & Wheels, Cotton Fiber
  • 4" Bridled Cup Brush
  • T-LOC Pipe Polishing Belts
  • 3M Right Angle Grinder Accy
  • Wide Belts, Misc Sizes
  • 3" Power Tube Brush
  • 7/16" dia Straight Cart. Rolls
  • Knot Wire Wheels
  • Wide Belts
  • 4-1/2" T-28 Angled Grind Wheel
  • 9" & larger x 7/8 Fiber Discs
  • 3/4" Pilot End Wire End Brush
  • 1-1/4" Tube Center Nylox Wheel
  • 6" x 2" Flap Wheels
  • #1469 (1 qt) Cream Scotch-Weld
  • 3" Hard / Treated Cloth Wheel
  • Tube Brushes, Nylon Abr Fila.
  • Overlap Slotted Discs
  • 6" Plain-Back Discs
  • T-1 Straight Grinding Wheels
  • Accessories & Misc
  • 1" Finishing Flap Wheels
  • 2 x 42 Coated Belts
  • Trim-Kut Discs
  • 7" T-27 Flap Discs
  • 2" Type-R Non-Woven QC Disc
  • 6" Dbl Row Knot Wheels
  • 15/16" Tube Brushes
  • Discs & Wheel Accessories
  • 8" Cable Twist Knot Wheels
  • Shape "J", 1/8" Shank Burs
  • Diamond Cutting Wheels
  • 7/8" Power Tube Brushes
  • 11/16" Nylon Abr Tube Brushes
  • 6" Clean & Strip Wheels
  • 3/16" dia Straight Cart. Rolls
  • 6" PSA Disc Pad, 6 dust holes
  • 6" Flannel Buffing Wheels
  • 2-1/2" Flap Wheels, 1/4-20 QC
  • #1751 (1 pt) Gray Part B/A Sco
  • 6" T-28 Angled Grind Wheels
  • 2-3/4" x 17-1/2" Hook Sheets
  • Dust Pans
  • 4-1/2"x5/8-11 Fiber Discs
  • 6" PSA Disc Backup Pads
  • Cut-off and Grinding Wheels
  • 6" Crimped Wire Wheels
  • Nylon Wheel Adapters
  • 7/8" 80 .040 SiC - M-Brad Powe
  • 12" x 4" Flap Brushes
  • 3" Type-R Quick-Chg Discs
  • 2" Encapsulated Crimped Wheels
  • Flap Rolls (Wide Flap Wheels)
  • 8" Discs, PSA, 8 dust holes
  • 9" x 11" Plain-Back Sheets
  • 2-3/4" PSA Abrasive Rolls
  • High Strength Discs
  • Discs, 4-1/2" Surface Conditio
  • 52 x 75 Non-Woven Belts
  • 9"x7/8" T-27 Cut-off Wheels
  • 1/2 x 20-1/2 Coated Belts
  • 1/4 x 12 Non-Woven Belts
  • 7" Flap Discs
  • Detail Marking Brushes
  • Portable Diamond/SuperAbr Belt
  • 3/8 x 103 Coated Belts
  • 4" Crimped Wire Cup Brush
  • Type-M Non-Woven QC Discs
  • Non-woven Accessories
  • 6" Diamond Wheels
  • 6" PSA Coated Abr Discs
  • 6" Crimped Wire Wheels
  • Low HP Chop Saw Wheels
  • 1" & Smaller Unitized Wheels
  • 1/4" Minature End Brushes
  • Quick Change (Spin-On) Discs
  • 1" Encapsulated Crimped Wheels
  • Flap Discs, Non-Woven
  • 3" Standard Twist Knot Wheels
  • Small Scratch Brushes, Alum
  • White VHB Foam Tapes
  • 5" Flap Wheels, Non-Woven
  • 3" 1/4"ch T-27 Cut-off Wheel
  • Non-Woven Belts, Standard
  • 9" & larger x 7/8 Fiber Discs
  • 6 x 300 Coated Belts
  • 4-1/2" T-1 MTX Cotton Wheels
  • 5" Hook Discs (no holes)
  • 4 x 132 Coated Belts
  • 1/4" dia Full-Taper Cart. Roll
  • TR-300 Series Versaflo PAPRs
  • 2-1/4 x 9-3/4 Non-Woven Belts
  • 1/2 x 18 Coated Belts
  • Discs, Coated Abrasive
  • 4" Flaring Cup Wheels
  • 4" Carbon Steel Knot Cup Brush
  • 15" and larger PSA Discs
  • Unitized Discs
  • 9/16" Rectangular Tube Brush
  • Stationary Belts, Non-Woven
  • 6" Cable Twist Knot Wheels
  • 11" PSA Coated Abr Discs
  • 2-1/2" Flap Wheels, 1/4-20 QC
  • VersaFlow Batteries/Chargers
  • 14" Unitized Wheels
  • 9/16" Power Tube Brushes
  • 5" TN 5/8-11 Non-Woven
  • 5/8 x 20-1/2 Coated Belts
  • 3" Minature Mounted End Br
  • 8" Deburring Wheels
  • Mandrels
  • 52 x 103 Coated Belts
  • 2-3/4" Nylon Abr Tube Brushes
  • 3-1/2" Nylox Disc (Cup) Brush
  • Interleaf Flap Wheels
  • 4-1/2"x7/8 Fiber Discs
  • 6" x NH Non-Woven Discs
  • 5/8" Mini Flap Wheels
  • Sanding Pads
  • Back-up Pads, Quick-change
  • 5" Flap Discs
  • 13/16" Tube Brushes
  • 14" Nylox Disc (Cup) Brush
  • 4" x 5/8" AH Flap Discs
  • 5" T-29 Angled Flap Discs
  • Single-Coat Foam, by Type/Code
  • 2 x 118 Coated Belts
  • Latex Abrasive Cushioned Rolls
  • SS Shoe Handle Scratch Brush
  • 7" T-1 GFX Cotton Fiber Wheels
  • 3/4" wide Single Coated Foam
  • 6" Fluting Wheels
  • Mechanical Cleaning
  • 1-1/2" ATG Adh Transfer Tapes
  • 3 x 24 Non-Woven Belts
  • Bandages
  • Hook & Loop Discs
  • Abrasive Rolls - Plain-Backed
  • 5/8" wide Single Coated Foam
  • 7" Hook Discs, No Dust Hole
  • Portable Belts, Sia
  • 8" SiC Green Bench Wheels
  • 1/2" Knot Wire End Brush
  • 5/8" dia Half Taper Cart. Roll
  • WEI-07756
  • #5136F Foil Splice Sensor Tabs
  • 2" Flap Wheels, 1/4-20 Q.C.
  • 4" T-27 GFX Cotton Fiber Wheel
  • Miscellaneous Widths
  • 8" Double Row Knot Brush
  • T-27 D/C Grinding Wheels
  • 1" Coated Abrasive Rolls
  • 5" Hook Disc Pad, 5 dust holes
  • 10" Nylox Disc (Cup) Brush
  • Block Sponges, Sia
  • 8-1/4" Metal Foil Tapes
  • Teardrop Sheets
  • 6" Hook Discs, 9 dust holes
  • 3/8" Rectangular Tube Brush
  • Felt Mounted Wheels
  • 3/4 x 18 Coated Belts
  • 2 x 17 Coated Belts
  • 4 x 11 Coated Belts
  • 3-1/2" Single Row Knot Cup Br
  • T-1 Cotton Grind & Blend Wheel
  • 9" & larger x 7/8 Fiber Discs
  • 12" SiC Green Bench Wheels
  • Hook & Loop Discs
  • 6" Hook Discs, 6 dust holes
  • Small Belts, Standard
  • Festool 7-1/4" Titan 2 H&L Discs
  • 7" Fiber Disc Back-up Pads
  • Bio-Circle Fluids
  • 5" Encap Cup Brushes
  • 11/16" Nylon Filament
  • 37 x 48 Coated Belts
  • 1/8" sh Vitrified Mtd Points
  • A24N Fast Grinding Wheels
  • 12" High Strength Discs
  • 5" Hook Discs, 5 dust holes
  • Small Scratch Brushes
  • 3" Type-R Non-Woven QC Disc
  • Sanding Discs, Plain-Backed
  • 4-1/2" x 5/8 Flap Discs
  • Non-Woven Abrasive Wheels
  • 3" Type-M Quick-Chg Discs
  • 1/4" sh Cotton Fiber Mtd Point
  • 2-1/2 x 60 Coated Belts
  • Festool 9" Brilliant Sanding Discs
  • 1-1/4" Nylon Abr Tube Brushes
  • 11" Hook Discs (no holes)
  • Linear Surface Finishing Syste
  • Interleaf Flap Discs
  • Walter Welding
  • 12 mm wide Double-Coated Film
  • Diamond/SuperAbr Wheels
  • 8" Hook Coated Abr Discs
  • Unitized Pads & Blocks
  • 1-1/2" Mounted Flap Wheels
  • Scrub Brushes
  • 4 x 84 Non-Woven Belts
  • Weiler Abrasives
  • 5" Hook Disc Pad, 5/8-11
  • Weiler 3-1/2" Crimped Wire Cu
  • 8" x 1/2" AH Non-Woven Discs
  • 6" T-27 Cut-off Wheels
  • 14" & larger PSA Discs
  • Portable Belts, Weiler
  • 54 x 103 Coated Belts
  • 1-1/2" Nylon Wheels
  • 5/16" Rectangular Tube Brush
  • 1150-**-0103 Components
  • Linear Sanding Wheel Systems
  • 63 x 103 Coated Belts
  • 7/8" Rectangular Tube Brush
  • 3M Pinlock Suspension Hard Hat
  • 1-1/2" Coated Abrasive Rolls
  • 6" PSA Coated Abr Discs
  • 1/2" Non-Woven Abrasive Bands
  • 25 x 60 Non-Woven Belts
  • 9" x 11" Hook Back Sheets
  • 4-1/2" x 7/8 Flap Discs
  • #4930 VHB Foam Tape
  • Saitech High Performance Wheel
  • 4-1/2" T-27 Cotton FiberWheel
  • 4" Bridled Cup Brush
  • 5/8" Power Tube Brushes
  • 3 ft x XX Safety Walk Mat
  • 3/16" dia Full-Taper Cart. Rol
  • 5" Fiber Disc Back-up Pads
  • 1/4" Hand Tube Brush
  • 3/8" dia Cartridge Rolls
  • 1-1/2" Type-M Non-Woven QC Dis
  • 1-1/4" Tube Center Wire Wheels
  • 8" Flap Wheels
  • 7" Flap Discs
  • 3" x 6" Plain Back Cushioned Abrasive Micromesh Sheets
  • 5/8" Mini Flap Wheels
  • 4-1/2" 36 grit Fiber Discs
  • 75 mm Metal Foil Tapes
  • Non-Woven Abrasive Wheels
  • 1-1/2" Power Tube Brushes
  • 12" Flannel Cloth Wheels
  • Non-Woven Rolls, Misc Sizes
  • Sisal Fabric Wheels
  • Orange (Tough Steels)
  • 9" PSA Coated Abr Discs
  • 2" Flap Wheel, 1/4" shank
  • 1/4" dia Full-Taper Cart. Roll
  • Walter 7/8" Arbor Stainless F
  • 4 x 21 Coated Belts
  • 3" Non-Woven Flap Discs
  • 3-2/3" x 9" Cloth Sheets
  • 4" Vinyl / Plastic Tapes
  • Type-M Non-Woven QC Discs
  • 5" Non-Woven Flap Discs
  • Accessories for Coated Abr
  • 5" Felt Wheels
  • Mounted Points
  • 8" Non-Woven Hook & Loop Disc
  • 1" Nylon Abr Tube Brushes
  • 7" T-27 Grinding Wheels
  • Flap Wheels
  • 4-1/2" T-29 Grinding Wheels
  • Trim-Kut Discs
  • Tapes
  • See: VS-2B51634
  • 7" Felt Polishing Discs
  • 6 x 48 Coated Belts
  • Type-R Non-Woven QC Discs
  • 7"x5/8-11 Fiber Discs
  • 3 x 18 Coated Belts
  • 7" x 1/2" Grinding Wheels
  • 8" Interleaf Flap Wheels
  • 1" Spiral Bands
  • 3" Type-S Non-Woven QC Discs
  • Sheets, Micromesh Regular (Original)
  • 2" PSA Disc Backup Pads
  • 1" & Smaller Unitized Wheels
  • 1 x 30 Coated Belts
  • 1/2 x 18 Coated Belts
  • 7"x7/8 T-28 Angled Wheels
  • 9"x5/8-11 T-27 Cut-off Wheels
  • 1/4" dia Cartridge Rolls
  • Fiber Discs, Carborundum
  • 1-1/2" Type-M Quick-Chg Discs
  • 3" Non-Woven Flap Discs
  • 3/4" dia Half Taper Cart. Roll
  • 14" SiC Green Bench Wheels
  • 2 x 75 Coated Belts
  • Non-Woven Abrasives, Arc
  • 4-1/4" x 4-1/2" PSA Sheets
  • 12" Low HP Chop Saw Wheels
  • 1-1/2" Type-S Non-Woven QC Dis
  • Flange Sets and Adaptors
  • Combi-Twist Knot Cup Brushes
  • 5" Cushioned Abrasive Discs
  • 3" Interleaf Flap Discs
  • Cleaners, Aqueous, Alkaline
  • TR-300 Series Versaflo PAPRs
  • 2-1/2" Flap Wheels, 1/4-20 QC
  • #431 Aluminum Foil Tape
  • 7"x7/8" T-27 Cut-off Wheels
  • 14" T-1 Cut-off Wheels
  • 6" Clean & Strip Wheels
  • 1/2 x 12 Coated Belts
  • 1-3/16" Flap Wheels
  • Half-Taper Cartridge Rolls
  • Encap ualted Cup Brushes
  • 4" T-1 Grinding Wheels
  • 2" (48mm) Crepe Masking Tapes
  • 2-1/2" Double-Row Knot Cup Br
  • Tool Accessories
  • Walter 2-1/2" Cut-off Wheels
  • 1-1/2" Type-R Quick-Chg Discs
  • 1/4" Power Tube Brushes
  • 4" Flaring Cup Wheels
  • 14" General Purpose Wheels
  • 1" Type-R Non-Woven QC Disc
  • #3381 Aluminum Foil Tape
  • 4" Single Row Knot Cup Brush
  • 9" Diamond Cut-off Wheels
  • 5" Discs, PSA, no dust holes
  • V-100 Versaflo Pneumatic PAPR
  • Hot & Cold Products
  • Small Hook Disc Pads (<2")
  • 8" T-1 Cut-off Wheels
  • 2-3/4" Nylox Cup Brush
  • Scrub Brushes
  • Standard Flap Wheels
  • 4" wide Foam Tapes
  • Back-up Pads, Quick-change
  • 5" Bridled Cup Brush
  • Walter FX Discs
  • 2-1/2" Crimped Wire Cup Brush
  • 1" Gaffer Matte Cloth Tape
  • Festool 4 x 6 Vlies H&L Triangle
  • Tube Fitting Brushes
  • 7"x5/8-11 T-29 Grinding Wheels
  • 13-1/4" Metal Foil Tapes
  • 3" 3/8"ch T-1 Cut-off Wheels
  • 3/8" Crimped Mtd Wheels
  • 8 x 60 Coated Belts
  • Rolls, Mesh/Screen Abrasive
  • 3-1/2 x 15-1/2 Coated Belts
  • 1" & Smaller Unitized Wheels
  • 3/16" dia Cartridge Rolls
  • 5/8" Power Tube Brushes
  • 2-3/4" x 5" Hook Sheets
  • 1-3/4" Power Tube Brush
  • 2 x 132 Coated Belts
  • Profile Sponges
  • 6" Non-Woven Hook & Loop Disc
  • 2" Type-R Quick-Chg Discs
  • 1300-**-0103 Components
  • 3-1/2 x 15-1/2 Non-Woven Belts
  • 3" Finishing Discs
  • Wire Cup Brushes
  • 6" Double-Row Knot Wire Cup Br
  • Type-R Quick-Change Discs
  • 12 x 144 Coated Belts
  • 4-1/2" 120 grit Fiber Discs
  • 3" x 1" Non-Woven Brushes
  • 25 x 75 Coated Belts
  • Encapsulated Wire Wheels
  • T-1 Straight Cut-off Wheels
  • 1 x 21 Non-Woven Belts
  • 1524CW Venture Tape, Alu
  • Double-Sided Foam Tape x Width
  • 14" x 1 Wheels
  • 1" Non-Woven Rolls
  • 9/16" Minature Knot Wheel
  • 1/4 x 18 Coated Belts
  • 1" Type-S Non-Woven QC Discs
  • 8" x NH Non-Woven Discs
  • 3" Type-M Quick-Chg Discs
  • Plain-Back Sheets, Misc Size
  • 6" x 2" Flap Wheels
  • Walter T-27 ZIP+ Cut-Off Wheel
  • Portable Non-Woven Belts
  • 1-1/2" wide Single Coated Foam
  • 3" Clean & Strip Wheels
  • 5" T-1 Cut-off Wheels
  • Type-R Quick-Change Discs
  • 3" Bulk Adh Transfer Tapes
  • Quick-Change (Spin-on) Discs
  • 4 x 106 Coated Belts
  • 9/16" Rectangular Tube Brush
  • 1" Minature Stem-Mounted
  • 2" Hook Disc Backup Pads
  • 1-1/8 x 20-1/2 Non-Woven Belts
  • Plain-Back Abrasive Rolls
  • 9-1/2" Metal Foil Tapes
  • Block Sponges, Sait
  • #838 Weather Resistant Tape
  • 1-1/16" Power Tube Brushes
  • Respirator Fit Test Kit & Accy
  • 25 x 60 Non-Woven Belts
  • 1-5/8" Flap Wheels
  • 4 x 24 Coated Belts
  • 1" Spiral Bands
  • 6 x 132 Coated Belts
  • 5/8" dia Cartridge Rolls
  • 8" Felt Wheels
  • 1" Interleaf Flap Wheels
  • 3" Sisal Fabric Wheels
  • 5" 120 grit Fiber Discs
  • 1/2" Rectangular Tube Brush
  • 2"d Flap Wheel Brush
  • 6"x7/8" T-1 Cut-off Wheels
  • Square Pads
  • 4-1/2" Diamond Wheels
  • 2 x 132 Non-Woven Belts
  • 3/4" Banded Nylox End Brush
  • Beige VHB Foam Tapes
  • Walter 1/8" ALLSTEEL Grinding
  • 3/8" Nylon Abr Tube Brushes
  • Coated Abrasive Wheels
  • 5" Fiber Discs
  • 4-1/2" Flap Discs, Wendt
  • 5" Knot Bevel Wheels
  • 10" A/O Bench Grinding Wheels
  • 4-1/2" Interleaf Flap Disc
  • 2" .040 SiC - 120 1/2" A.H., M
  • B Shape Mounted Points
  • Weiler 5" Crimped Wire Cup Br
  • 1-1/2" Hook Non-Woven Discs
  • 1/4 x 12 Coated Belts
  • 3/4" Type-S Quick-Chg Discs
  • 11" Hook Multi-hole/Mesh Discs
  • 4 x 6 Triangle Delta Sheets
  • Backup Pads
  • 36 x 75 Non-Woven Belts
  • 14" Diamond Wheels
  • 12 x 24 Sanding Screen Sheets
  • Walter Felt Discs
  • 3/8" dia Straight Cart. Rolls
  • Walter 5/8"-11 Arbor Stainles
  • Accessories
  • 7" Flap Discs
  • 1/2" Nylon Abr Tube Brushes
  • 1" Flap Wheel, 1/4-20 shank
  • 7" SiC Green Bench Wheels
  • 3/4" Banded Crimped End Brush
  • Wire Products
  • 4-1/2" 80 grit Fiber Discs
  • 2 x 60 Coated Belts
  • 1-1/2" Mounted Flap Wheels
  • Tampico Wheels
  • Type 18 Plugs
  • Diamond & Super Abrasives
  • 1" wide Utility Tapes
  • 26" T-1 Cut-off Wheels
  • 2 x 37 Non-Woven Belts
  • 4-3/4"" x 7-7/8"" Hook Sheets
  • 4" T-1 MTX Cotton Fiber Wheels
  • 3" Spin-On (R) Non-Woven Disc
  • 2-1/2" Encapsulated Crimped
  • 4-1/2" Flap Discs, Arc
  • 5" Hook Discs, 5 dust holes
  • 6" Encap Crimped Wire Wheel
  • 1 x 132 Coated Belts
  • 3/4" ATG Adh Transfer Tapes
  • 3/8" Masking Tapes
  • 3" wide Single Coated Foam
  • 8" Unitized Wheels
  • 4 x 60 Coated Belts
  • Shape "H", 1/8" Shank Burs
  • 9"x7/8" T-27 Grinding Wheels
  • 5" Crimped Wire Cup Brush
  • Shape "L", 1/8" Shank Burs
  • 1-3/8" Flap Wheels
  • 3" Spiral Bands
  • 5" x 7/8 Fiber Discs
  • 1" Pilot End Wire End Brushes
  • PSA Backed Sanding Discs
  • 75 mm x 110 mm PSA Sheets
  • Hook Non-Woven Discs
  • Sandblast Stencil, Slot Feed
  • 6" T-27 Cotton Fiber Wheels
  • 10" Standard Twist Knot Wheels
  • Double-Sided Film Tapes x CODE
  • 4" T-27 Flap Discs
  • 13/16" Nylon Abr Tube Brushes
  • 125 mm Metal Foil Tapes
  • 54" Bulk Adh Transfer Tapes
  • 1/8" dia Half Taper Cart. Roll
  • Coated Abrasive Flap Wheels
  • 3-1/2 x 15-1/2 Coated Belts
  • 4" T-1 Cut-off Wheels
  • Spiral Band Mandrels
  • 43 x 75 Coated Belts
  • 2" Circular Flared End Brush
  • 1/2 x 18 Non-Woven Belts
  • 1/8" sh Resin Bond Mtd Points
  • 7" x 5/8-11 Flap Discs
  • 3/4" dia Cartridge Rolls
  • 36 x 75 Coated Belts
  • Sanding Screen Discs
  • 2" Finishing Discs
  • Cotton Bond Cut-Off Wheels
  • Trim-Kut Disc Backup Pads
  • 1-1/2" dia Cartridge Rolls
  • 1-3/8" Tube Center Nylox Wheel
  • 16" T-1 Cut-off Wheels
  • 5/16" dia Straight Cart. Rolls
  • Combo-Block Profile Sponges
  • Straight (T-1) Cut-off Wheels
  • Walter T-1 ZIP Cut-Off Wheels
  • 4-1/2x3x2 Alundum, Medium Rubb
  • 9" Diamond Cut-off Wheels
  • 1-1/2" Flap Wheel, 1/4" shank
  • 5/16 Full-Taper Cartridge Roll
  • Painting Gloves/Mitts
  • 4-1/2" Flap Discs, Weiler
  • Small PSA Disc Pads (<2")
  • 4" Coated Abrasive Rolls
  • 7"x5/8-11 T-29 Grinding Wheels
  • Buckets
  • Discs, 4" Surface Conditioning
  • 7" T-27 Cut-off Wheels
  • 4" T-27 Cut-off Wheels
  • 3" T-27 Grinding Wheels
  • 14" PSA Coated Abr Discs
  • 36 x 75 Non-Woven Belts
  • Weiler Crimped Wire Cup Brushe
  • 5" Hook Discs, 8 dust holes
  • 6" T-28 Angled Grind Wheels
  • 8" Hook Discs, 6 dust holes
  • 9" & larger Flap Discs
  • 9x11 Waterproof Sheets
  • 7" T-29 Angled Flap Discs
  • 8" Metal Foil Tapes
  • 1-1/2" Type-S Cotton Disc
  • 8" Buff/Polish Pads
  • 7" PSA Disc Backup Pads
  • 1-3/4" wide VHB Foam Tapes
  • 5" Hook Discs, 8 dust holes
  • 7" NW Disc Holders
  • Walter Stainless Grinding Whee
  • 3" Nylox Disc (Cup) Brush
  • 7/16" Power Tube Brushes
  • Kit Cases & Cabinets
  • 1" Flap Wheels, 1/4" shank
  • 4" T-28 Angled Grind Wheels
  • 4" Stem Mounted Wire Wheels
  • 10" Bench Mount Grinding Whee
  • 2-1/2" Flap Wheels
  • 6" Interleaf Flap Wheels
  • Coated Abrasives, Sait
  • Backup Pads, Type-R (screw)
  • 6" Hook Coated Abr Discs
  • 8" PSA Disc Pads, Bolt-on
  • 2" Coated Abrasive Rolls
  • 8" x 3" Grinding Wheels
  • Flared Brushes
  • 1/2" Rectangular Tube Brush
  • Mounted Points, 1/8" shank
  • Unitized Blocks
  • 9" T-1 MTX Cotton Fiber Wheels
  • 14" Diamond Wheels
  • Sandblast Stencil, TractorFeed
  • 5" 100 grit Fiber Discs
  • 1 x 90 Coated Belts
  • 11/32" Power Tube Brushes
  • Metal Finishing Whels
  • Penetrants
  • 3" T-27 Cut-off Wheels
  • 5/16 Full-Taper Cartridge Roll
  • Discs, Non-Woven Finishing
  • 1" Unitized Wheels
  • Foil Tapes (By Width)
  • 6" PSA Disc Pads, Bolt-on
  • 8" Cut & Polish Wheels
  • 8" Hook Discs (no holes)
  • 4 x 60 Coated Belts
  • Pathogen/Bloodborne Protection
  • Rolls, Micro-mesh Cushioned Abrasive
  • Walter 1/4" HP Grinding Wheel
  • 5" Hook Discs (no holes)
  • Disc Backing Pads
  • 2" Type-R Non-Woven QC Disc
  • 10" Cable Twist Knot Wheels
  • 7" T-27 Cotton Fiber Wheels
  • 2-1/2" Rectangular Tube Brush
  • 6" T-28 Angled Grind Wheels
  • 5/16" 320 .022 SiC - M-Brad Po
  • 7"x7/8" T-27 Cut-off Wheels
  • 3/16" Power Tube Brushes
  • 5" PSA Coated Abr Discs
  • Discs, 1" Roloc Diamond
  • 1/4 x 24 Coated Belts
  • 1-1/2" PSA Coated Abr Discs
  • 1-1/4" wide Foam Tapes
  • Interleaf Cross Buffs
  • Conversion Pads
  • 3/4 x 20-1/2 Coated Belts
  • 1" Flap Wheels, 1/8" shank
  • 6" Hook Discs, 8 dust holes
  • 3/4" Type-R Non-Woven QC Disc
  • Foam-Back Abrasive Discs
  • 3" Flap Wheels, 1/4" shank
  • 2-1/2 x 60 Coated Belts
  • 5" Paper-Back PSA Discs
  • 6"x7/8" T-1 Cut-off Wheels
  • Emergency Response
  • 9" T-1 Cotton Fiber Wheels
  • Non-Woven Mounted Points
  • 3/4 x 60 Coated Belts
  • 2" Unitized Wheels
  • 2-1/4" x 17-1/2" Plain Sheets
  • #373 Box Sealing Tape
  • 1-1/2 x 30 Non-Woven Belts
  • 4-1/2" T-27 Grinding Wheels
  • 8" Encapsulated Crimped Wheels
  • Shape "N", 1/8" Shank Burs
  • 1 x 60 Non-Woven Belts
  • 7" T-28 Angled Grind Wheels
  • Felt Flap Discs & Wheels
  • 3" Flap Wheels, 1/4" shank
  • Power Tube Brushes
  • 6" Hook Discs, 8 dust holes
  • 6" DF-6 Hook Discs
  • Sanding Star Mandrels
  • 5" Diamond Wheels
  • Wide Non-Woven Belts
  • 4-1/2" NW Disc Holders
  • 3/4" Type-S Non-Woven QC Discs
  • Z24R Zirc HP Grinding Wheels
  • 5" 120 grit Fiber Discs
  • 3" Roloc Unitized Wheels
  • 3 x 24 Non-Woven Belts
  • Type-R Non-Woven QC Discs
  • 5/16" Power Tube Brushes
  • 2-1/2" Encap Crimp Wire Wheel
  • 2" T-1 Grinding Wheels
  • 3" wide Sngl-Coated Film Tape
  • Interleaf Flap Discs
  • 5" x 5/8-11 T-27 Cut-off Whl
  • 12" Nylox Disc (Cup) Brush
  • 6 x 60 Coated Belts
  • Cartridge Rolls
  • #8998 Polyimide Hi-Temp Film
  • Encapsulated Knot Wheels
  • 1-1/2" 36mm Clear Package Tap
  • 14" Grinding/Bench Wheels
  • Sanding Star Mandrels
  • 1-3/16 x 24 Non-Woven Belts
  • 4" Interleaf Flap Wheels
  • 5" x 7/8 Fiber Discs
  • 1" Minature Wheels
  • 4" Type-S Non-Woven QC Discs
  • Emergency Response Centers
  • 12" Cable Twist Knot Wheels
  • 1" PSA Discs (and smaller)
  • Main Menu
  • Products by Vendor
  • Contact Us
  • Products by System

• Sign In

• My Cart 0
  • Your shopping cart is empty.

    View & Edit Cart